cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option

This doesn't have any benefit apart from saving a small amount of memory
when it is disabled. The ifdef hackery in the code makes it dirty
unnecessarily.

Clean it up by removing the Kconfig option completely. Few defconfigs
are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

arch/arm/configs/exynos_defconfig

@@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

arch/arm/configs/multi_v5_defconfig

@@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y

arch/arm/configs/multi_v7_defconfig

@@ -132,7 +132,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

arch/arm/configs/mvebu_v5_defconfig

@@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y

arch/arm/configs/pxa_defconfig

@@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

arch/arm/configs/shmobile_defconfig

@@ -38,7 +38,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y

arch/mips/configs/lemote2f_defconfig

@@ -40,7 +40,6 @@ CONFIG_PM_STD_PARTITION="/dev/hda3"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

arch/powerpc/configs/ppc6xx_defconfig

@@ -62,7 +62,6 @@ CONFIG_MPC8610_HPCD=y
 CONFIG_GEF_SBC610=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m

arch/sh/configs/sh7785lcr_32bit_defconfig

@@ -25,7 +25,7 @@ CONFIG_SH_SH7785LCR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_SH_CPU_FREQ=y
 CONFIG_HEARTBEAT=y

drivers/cpufreq/Kconfig

@@ -37,14 +37,6 @@ config CPU_FREQ_STAT
 
 	  If in doubt, say N.
 
-config CPU_FREQ_STAT_DETAILS
-	bool "CPU frequency transition statistics details"
-	depends on CPU_FREQ_STAT
-	help
-	  Show detailed CPU frequency transition table in sysfs.
-
-	  If in doubt, say N.
-
 choice
 	prompt "Default CPUFreq governor"
 	default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ

drivers/cpufreq/cpufreq_stats.c

@@ -25,9 +25,7 @@ struct cpufreq_stats {
 	unsigned int last_index;
 	u64 *time_in_state;
 	unsigned int *freq_table;
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	unsigned int *trans_table;
-#endif
 };
 
 static int cpufreq_stats_update(struct cpufreq_stats *stats)
@@ -46,9 +44,7 @@ static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
 	unsigned int count = stats->max_state;
 
 	memset(stats->time_in_state, 0, count * sizeof(u64));
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	memset(stats->trans_table, 0, count * count * sizeof(int));
-#endif
 	stats->last_time = get_jiffies_64();
 	stats->total_trans = 0;
 }
@@ -84,7 +80,6 @@ static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
 	return count;
 }
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 {
 	struct cpufreq_stats *stats = policy->stats;
@@ -129,7 +124,6 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 	return len;
 }
 cpufreq_freq_attr_ro(trans_table);
-#endif
 
 cpufreq_freq_attr_ro(total_trans);
 cpufreq_freq_attr_ro(time_in_state);
@@ -139,9 +133,7 @@ static struct attribute *default_attrs[] = {
 	&total_trans.attr,
 	&time_in_state.attr,
 	&reset.attr,
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	&trans_table.attr,
-#endif
 	NULL
 };
 static struct attribute_group stats_attr_group = {
@@ -200,9 +192,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
 
 	alloc_size = count * sizeof(int) + count * sizeof(u64);
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	alloc_size += count * count * sizeof(int);
-#endif
 
 	/* Allocate memory for time_in_state/freq_table/trans_table in one go */
 	stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
@@ -211,9 +201,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
 
 	stats->freq_table = (unsigned int *)(stats->time_in_state + count);
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	stats->trans_table = stats->freq_table + count;
-#endif
 
 	stats->max_state = count;
 
@@ -259,8 +247,6 @@ void cpufreq_stats_record_transition(struct cpufreq_policy *policy,
 	cpufreq_stats_update(stats);
 
 	stats->last_index = new_index;
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	stats->trans_table[old_index * stats->max_state + new_index]++;
-#endif
 	stats->total_trans++;
 }