mfd: Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/ab8500-debugfs.c

@@ -2680,16 +2680,12 @@ static int ab8500_debug_probe(struct platform_device *plf)
 	irq_ab8500 = res->start;
 
 	irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
-	if (irq_first < 0) {
-		dev_err(&plf->dev, "First irq not found, err %d\n", irq_first);
+	if (irq_first < 0)
 		return irq_first;
-	}
 
 	irq_last = platform_get_irq_byname(plf, "IRQ_LAST");
-	if (irq_last < 0) {
-		dev_err(&plf->dev, "Last irq not found, err %d\n", irq_last);
+	if (irq_last < 0)
 		return irq_last;
-	}
 
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
 

drivers/mfd/db8500-prcmu.c

@@ -3130,10 +3130,8 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(&pdev->dev, "no prcmu irq provided\n");
+	if (irq <= 0)
 		return irq;
-	}
 
 	err = request_threaded_irq(irq, prcmu_irq_handler,
 	        prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);

drivers/mfd/fsl-imx25-tsadc.c

@@ -69,10 +69,8 @@ static int mx25_tsadc_setup_irq(struct platform_device *pdev,
 	int irq;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(dev, "Failed to get irq\n");
+	if (irq <= 0)
 		return irq;
-	}
 
 	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
 					      tsadc);

drivers/mfd/intel_soc_pmic_bxtwc.c

@@ -450,10 +450,8 @@ static int bxtwc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Invalid IRQ\n");
+	if (ret < 0)
 		return ret;
-	}
 	pmic->irq = ret;
 
 	dev_set_drvdata(&pdev->dev, pmic);

drivers/mfd/qcom_rpm.c

@@ -561,22 +561,16 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	clk_prepare_enable(rpm->ramclk); /* Accepts NULL */
 
 	irq_ack = platform_get_irq_byname(pdev, "ack");
-	if (irq_ack < 0) {
-		dev_err(&pdev->dev, "required ack interrupt missing\n");
+	if (irq_ack < 0)
 		return irq_ack;
-	}
 
 	irq_err = platform_get_irq_byname(pdev, "err");
-	if (irq_err < 0) {
-		dev_err(&pdev->dev, "required err interrupt missing\n");
+	if (irq_err < 0)
 		return irq_err;
-	}
 
 	irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
-	if (irq_wakeup < 0) {
-		dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+	if (irq_wakeup < 0)
 		return irq_wakeup;
-	}
 
 	match = of_match_device(qcom_rpm_of_match, &pdev->dev);
 	if (!match)

drivers/mfd/sm501.c

@@ -1394,10 +1394,8 @@ static int sm501_plat_probe(struct platform_device *dev)
 	sm->platdata = dev_get_platdata(&dev->dev);
 
 	ret = platform_get_irq(dev, 0);
-	if (ret < 0) {
-		dev_err(&dev->dev, "failed to get irq resource\n");
+	if (ret < 0)
 		goto err_res;
-	}
 	sm->irq = ret;
 
 	sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);