Commit 80313b30 authored by Stefan Lippers-Hollmann's avatar Stefan Lippers-Hollmann Committed by Ingo Molnar

x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk

The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in
both BIOS and UEFI mode while rebooting unless reboot=pci is
used. Add a quirk to reboot via the pci method.

The problem is very intermittent and hard to debug, it might succeed
rebooting just fine 40 times in a row - but fails half a dozen times
the next day. It seems to be slightly less common in BIOS CSM mode
than native UEFI (with the CSM disabled), but it does happen in either
mode. Since I've started testing this patch in late january, rebooting
has been 100% reliable.

Most of the time it already hangs during POST, but occasionally it
might even make it through the bootloader and the kernel might even
start booting, but then hangs before the mode switch. The same symptoms
occur with grub-efi, gummiboot and grub-pc, just as well as (at least)
kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16).
Upgrading to the most current mainboard firmware of the ASRock
Q1900DC-ITX, version 1.20, does not improve the situation.

( Searching the web seems to suggest that other Bay Trail-D mainboards
  might be affected as well. )
--
Signed-off-by: default avatarStefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@vger.kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mirSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 36cbf25d
......@@ -183,6 +183,16 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
},
},
/* ASRock */
{ /* Handle problems with rebooting on ASRock Q1900DC-ITX */
.callback = set_pci_reboot,
.ident = "ASRock Q1900DC-ITX",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASRock"),
DMI_MATCH(DMI_BOARD_NAME, "Q1900DC-ITX"),
},
},
/* ASUS */
{ /* Handle problems with rebooting on ASUS P4S800 */
.callback = set_bios_reboot,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment