Commit 803dd9c7 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: phy: avoid suspending twice a PHY

As part of a call to ndo_close() a netdevice driver may call
phy_disconnect() -> phy_detach() -> phy_suspend(), such that the PHY is
suspsended at this point and a netdevice driver may clock gate the
backing peripheral providing MDIO bus accessses as well.

Update mdio_bus_phy_may_suspend() to return whether a PHY is allowed to
be suspended and conversely resumed if and only if it was not previously
suspended before while it is currently in detached (netdev pointer is
NULL) state.

This fixes bus errors seen during S2/S3 suspend/resume cycles for
netdevice drivers such as GENET which clock gates the entire Ethernet
MAC, including the MDIO bus block.
Acked-by: default avatarFugang Duan <B38611@freescale.com>
Tested-by: default avatarFugang Duan <B38611@freescale.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8a477a6f
...@@ -443,9 +443,13 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) ...@@ -443,9 +443,13 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
if (!drv || !phydrv->suspend) if (!drv || !phydrv->suspend)
return false; return false;
/* PHY not attached? May suspend. */ /* PHY not attached? May suspend if the PHY has not already been
* suspended as part of a prior call to phy_disconnect() ->
* phy_detach() -> phy_suspend() because the parent netdev might be the
* MDIO bus driver and clock gated at this point.
*/
if (!netdev) if (!netdev)
return true; return !phydev->suspended;
/* Don't suspend PHY if the attched netdev parent may wakeup. /* Don't suspend PHY if the attched netdev parent may wakeup.
* The parent may point to a PCI device, as in tg3 driver. * The parent may point to a PCI device, as in tg3 driver.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment