clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg

The RZ/V2M doesn't have a matching set of reset monitor regs for each reset
reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a
single bit per module.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

drivers/clk/renesas/rzg2l-cpg.c

@@ -1177,8 +1177,16 @@ static int rzg2l_cpg_status(struct reset_controller_dev *rcdev,
 	const struct rzg2l_cpg_info *info = priv->info;
 	unsigned int reg = info->resets[id].off;
 	u32 bitmask = BIT(info->resets[id].bit);
+	s8 monbit = info->resets[id].monbit;
 
-	return !(readl(priv->base + CLK_MRST_R(reg)) & bitmask);
+	if (info->has_clk_mon_regs) {
+		return !(readl(priv->base + CLK_MRST_R(reg)) & bitmask);
+	} else if (monbit >= 0) {
+		u32 monbitmask = BIT(monbit);
+
+		return !!(readl(priv->base + CPG_RST_MON) & monbitmask);
+	}
+	return -ENOTSUPP;
 }
 
 static const struct reset_control_ops rzg2l_cpg_reset_ops = {

drivers/clk/renesas/rzg2l-cpg.h

@@ -25,6 +25,7 @@
 #define CPG_PL6_SSEL		(0x414)
 #define CPG_PL6_ETH_SSEL	(0x418)
 #define CPG_PL5_SDIV		(0x420)
+#define CPG_RST_MON		(0x680)
 #define CPG_OTHERFUNC1_REG	(0xBE8)
 
 #define CPG_SIPLL5_STBY_RESETB		BIT(0)
@@ -206,17 +207,22 @@ struct rzg2l_mod_clk {
  *
  * @off: register offset
  * @bit: reset bit
+ * @monbit: monitor bit in CPG_RST_MON register, -1 if none
  */
 struct rzg2l_reset {
 	u16 off;
 	u8 bit;
+	s8 monbit;
 };
 
-#define DEF_RST(_id, _off, _bit)	\
+#define DEF_RST_MON(_id, _off, _bit, _monbit)	\
 	[_id] = { \
 		.off = (_off), \
-		.bit = (_bit) \
+		.bit = (_bit), \
+		.monbit = (_monbit) \
 	}
+#define DEF_RST(_id, _off, _bit)	\
+	DEF_RST_MON(_id, _off, _bit, -1)
 
 /**
  * struct rzg2l_cpg_info - SoC-specific CPG Description