Commit 81513c82 authored by Douglas Gilbert's avatar Douglas Gilbert Committed by James Bottomley

[PATCH] scsi_debug version 1.67 for lk 2.5.52

This patch uses the module_param() facility introduced in
lk 2.5.52 (see linux/moduleparam.h) to simplify boot time
and module load time parameters for the scsi_debug driver.

The intent of module_param() is to unify
   - boot time parameters
   - module load time parameters
   - sysfs driver parameters
into a few simple calls (seen from the driver's point of view).
The sysfs capability hasn't been implemented yet. Using
module_param() removes over 100 lines of boilerplate code
from the scsi_debug driver.

Following the conventions suggested by Rusty, scsi_debug's
kernel boot time options have been changed to this form:
    scsi_debug.num_devs=2
while the module load options are now like this:
    modprobe scsi_debug num_devs=2

This patch also updates the Kconfig entry for the scsi_debug
driver.
parent be388a51
No related merge requests found
......@@ -1545,24 +1545,18 @@ config SCSI_NSP32
say M here and read <file:Documentation/modules.txt>. The module
will be called nsp32.o.
#
# Note - this is a very special 'host' adapter that simulates the presence of some disks.
# It can come in very handy for troubleshooting. Anyone else is welcome to use it - all
# you do is hack it to simulate the condition you want to test for, and then use it.
#
# The actual configuration in any kernel release could change at any time as I hack it to
# simulate various conditions that I am testing.
#
config SCSI_DEBUG
tristate "SCSI debugging host simulator (EXPERIMENTAL)"
depends on EXPERIMENTAL && SCSI
help
This is a host adapter simulator that can be programmed to simulate
a large number of conditions that could occur on a real bus. The
advantage is that many hard to reproduce problems can be tested in a
controlled environment where there is reduced risk of losing
important data. This is primarily of use to people trying to debug
the middle and upper layers of the SCSI subsystem. If unsure, say N.
tristate "SCSI debugging host simulator"
depends on SCSI
help
This is a host adapter simulator that can simulate multiple hosts
each with multiple dummy SCSI devices (disks). It defaults to one
host adapter with one dummy SCSI disk. Each dummy disk uses kernel
RAM as storage (i.e. it is a ramdisk). To save space when multiple
dummy disks are simulated, they share the same kernel RAM for
their storage. See http://www.torque.net/sg/sdebug.html for more
information. This driver is primarily of use to those testing the
SCSI and block subsystems. If unsure, say N.
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
......
......@@ -20,6 +20,8 @@
* add timers for delayed responses [20020721]
* Patrick Mansfield <patmans@us.ibm.com> max_luns+scsi_level [20021031]
* Mike Anderson <andmike@us.ibm.com> sysfs work [20021118]
* dpg: change style of boot options to "scsi_debug.num_devs=2" and
* module options to "modprobe scsi_debug num_devs=2" [20021221]
*/
#include <linux/config.h>
......@@ -37,6 +39,7 @@
#include <linux/proc_fs.h>
#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/blk.h>
#include "scsi.h"
......@@ -51,7 +54,7 @@
#include "scsi_debug.h"
static const char * scsi_debug_version_str = "Version: 1.66 (20021205)";
static const char * scsi_debug_version_str = "Version: 1.67 (20021221)";
#ifndef SCSI_CMD_READ_16
#define SCSI_CMD_READ_16 0x88
......@@ -63,7 +66,7 @@ static const char * scsi_debug_version_str = "Version: 1.66 (20021205)";
#define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
/* Default values for driver parameters */
#define DEF_NR_FAKE_DEVS 1
#define DEF_NUM_DEVS 1
#define DEF_DEV_SIZE_MB 8
#define DEF_EVERY_NTH 100
#define DEF_DELAY 1
......@@ -82,7 +85,7 @@ static const char * scsi_debug_version_str = "Version: 1.66 (20021205)";
#define OPT_MEDIUM_ERR_ADDR 0x1234
static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB;
static int scsi_debug_num_devs = DEF_NR_FAKE_DEVS;
static int scsi_debug_num_devs = DEF_NUM_DEVS;
static int scsi_debug_opts = DEF_OPTS;
static int scsi_debug_every_nth = DEF_EVERY_NTH;
static int scsi_debug_cmnd_count = 0;
......@@ -1100,160 +1103,33 @@ static int schedule_resp(struct scsi_cmnd * cmnd,
}
}
#ifndef MODULE
static int __init num_devs_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_num_devs = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_num_devs: usage scsi_debug_num_devs=<n> "
"(<n> can be from 1 to around 2000)\n");
return 0;
}
}
__setup("scsi_debug_num_devs=", num_devs_setup);
static int __init max_luns_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_max_luns = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_max_luns: usage scsi_debug_max_luns=<n> "
"(<n> is a postive integer (def=2))\n");
return 0;
}
}
__setup("scsi_debug_max_luns=", max_luns_setup);
static int __init scsi_level_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_scsi_level = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_scsi_level: usage "
"scsi_debug_scsi_level=<n> (<n> is 1..4 (def=3))\n");
return 0;
}
}
__setup("scsi_debug_scsi_level=", scsi_level_setup);
static int __init dev_size_mb_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_dev_size_mb = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_dev_size_mb: usage "
"scsi_debug_dev_size_mb=<n>\n"
" (<n> is number of MB ram shared by all devs\n");
return 0;
}
}
__setup("scsi_debug_dev_size_mb=", dev_size_mb_setup);
static int __init opts_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_opts = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_opts: usage "
"scsi_debug_opts=<n>\n"
" (1->noise, 2->medium_error, 4->... (can be or-ed)\n");
return 0;
}
}
__setup("scsi_debug_opts=", opts_setup);
static int __init every_nth_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
if (tmp > 0)
scsi_debug_every_nth = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_every_nth: usage "
"scsi_debug_every_nth=<n>\n"
" timeout every nth command (when ...)\n");
return 0;
}
}
__setup("scsi_debug_every_nth=", every_nth_setup);
static int __init delay_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
scsi_debug_delay = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_delay: usage "
"scsi_debug_delay=<n>\n"
" delay response <n> jiffies\n");
return 0;
}
}
__setup("scsi_debug_delay=", delay_setup);
static int __init add_host_setup(char *str)
{
int tmp;
if (get_option(&str, &tmp) == 1) {
scsi_debug_add_host = tmp;
return 1;
} else {
printk(KERN_INFO "scsi_debug_add_host: usage "
"scsi_debug_add_host=<n>\n"
" <n> 0..127 (default 1)\n");
return 0;
}
}
__setup("scsi_debug_add_host=", add_host_setup);
#endif
/* Set 'perm' (4th argument) to 0 to disable module_param's definition
* of sysfs parameters (which module_param doesn't yet support).
* Sysfs parameters defined explicitly below.
*/
module_param_named(num_devs, scsi_debug_num_devs, int, 0);
module_param_named(max_luns, scsi_debug_max_luns, int, 0);
module_param_named(scsi_level, scsi_debug_scsi_level, int, 0);
module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, 0);
module_param_named(opts, scsi_debug_opts, int, 0); /* perm=0644 */
module_param_named(every_nth, scsi_debug_every_nth, int, 0);
module_param_named(delay, scsi_debug_delay, int, 0); /* perm=0644 */
module_param_named(add_host, scsi_debug_add_host, int, 0); /* perm=0644 */
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
MODULE_PARM(scsi_debug_num_devs, "i");
MODULE_PARM_DESC(scsi_debug_num_devs, "number of SCSI devices to simulate");
MODULE_PARM(scsi_debug_max_luns, "i");
MODULE_PARM_DESC(scsi_debug_max_luns, "number of SCSI LUNs per target to simulate");
MODULE_PARM(scsi_debug_scsi_level, "i");
MODULE_PARM_DESC(scsi_debug_scsi_level, "SCSI level to simulate");
MODULE_PARM(scsi_debug_dev_size_mb, "i");
MODULE_PARM_DESC(scsi_debug_dev_size_mb, "size in MB of ram shared by devs");
MODULE_PARM(scsi_debug_opts, "i");
MODULE_PARM_DESC(scsi_debug_opts, "1->noise, 2->medium_error, 4->...");
MODULE_PARM(scsi_debug_every_nth, "i");
MODULE_PARM_DESC(scsi_debug_every_nth, "timeout every nth command(def=100)");
MODULE_PARM(scsi_debug_delay, "i");
MODULE_PARM_DESC(scsi_debug_delay, "# of jiffies to delay response(def=1)");
MODULE_PARM(scsi_debug_add_host, "i");
MODULE_PARM_DESC(scsi_debug_add_host, "0..127 hosts allowed(def=1)");
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(num_devs, "number of SCSI devices to simulate");
MODULE_PARM_DESC(max_luns, "number of SCSI LUNs per target to simulate");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate");
MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->...");
MODULE_PARM_DESC(every_nth, "timeout every nth command(def=100)");
MODULE_PARM_DESC(delay, "# of jiffies to delay response(def=1)");
MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)");
static char sdebug_info[256];
static const char * scsi_debug_info(struct Scsi_Host * shp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment