Commit 815be9c2 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman

ARM: dts: kzm9d: Fix W=1 dtc warnings

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /pfc@e0140200/serial@e1030000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent a704b276
...@@ -18,7 +18,7 @@ / { ...@@ -18,7 +18,7 @@ / {
model = "EMEV2 KZM9D Board"; model = "EMEV2 KZM9D Board";
compatible = "renesas,kzm9d", "renesas,emev2"; compatible = "renesas,kzm9d", "renesas,emev2";
memory { memory@40000000 {
device_type = "memory"; device_type = "memory";
reg = <0x40000000 0x8000000>; reg = <0x40000000 0x8000000>;
}; };
...@@ -33,28 +33,28 @@ gpio_keys { ...@@ -33,28 +33,28 @@ gpio_keys {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
button@1 { one {
debounce_interval = <50>; debounce_interval = <50>;
wakeup-source; wakeup-source;
label = "DSW2-1"; label = "DSW2-1";
linux,code = <KEY_1>; linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
}; };
button@2 { two {
debounce_interval = <50>; debounce_interval = <50>;
wakeup-source; wakeup-source;
label = "DSW2-2"; label = "DSW2-2";
linux,code = <KEY_2>; linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
}; };
button@3 { three {
debounce_interval = <50>; debounce_interval = <50>;
wakeup-source; wakeup-source;
label = "DSW2-3"; label = "DSW2-3";
linux,code = <KEY_3>; linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
}; };
button@4 { four {
debounce_interval = <50>; debounce_interval = <50>;
wakeup-source; wakeup-source;
label = "DSW2-4"; label = "DSW2-4";
...@@ -63,7 +63,7 @@ button@4 { ...@@ -63,7 +63,7 @@ button@4 {
}; };
}; };
reg_1p8v: regulator@0 { reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "fixed-1.8V"; regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
...@@ -72,7 +72,7 @@ reg_1p8v: regulator@0 { ...@@ -72,7 +72,7 @@ reg_1p8v: regulator@0 {
regulator-boot-on; regulator-boot-on;
}; };
reg_3p3v: regulator@1 { reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "fixed-3.3V"; regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
...@@ -104,7 +104,7 @@ &iic1 { ...@@ -104,7 +104,7 @@ &iic1 {
}; };
&pfc { &pfc {
uart1_pins: serial@e1030000 { uart1_pins: uart1 {
groups = "uart1_ctrl", "uart1_data"; groups = "uart1_ctrl", "uart1_data";
function = "uart1"; function = "uart1";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment