drivers: bus: Delete CONFIG_SIMPLE_PM_BUS

The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/configs/multi_v7_defconfig

@@ -197,7 +197,6 @@ CONFIG_PCI_EPF_TEST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y

arch/arm/configs/oxnas_v6_defconfig

@@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y

arch/arm/configs/shmobile_defconfig

@@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/arm/mach-omap2/Kconfig

@@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS
 	select PM_GENERIC_DOMAINS
 	select PM_GENERIC_DOMAINS_OF
 	select RESET_CONTROLLER
-	select SIMPLE_PM_BUS
 	select SOC_BUS
 	select TI_SYSC
 	select OMAP_IRQCHIP

arch/arm64/configs/defconfig

@@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_HISILICON_LPC=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_FSL_MC_BUS=y
 CONFIG_TEGRA_ACONNECT=m
 CONFIG_GNSS=m

drivers/bus/Kconfig

@@ -152,18 +152,6 @@ config QCOM_EBI2
 	  Interface 2, which can be used to connect things like NAND Flash,
 	  SRAM, ethernet adapters, FPGAs and LCD displays.
 
-config SIMPLE_PM_BUS
-	tristate "Simple Power-Managed Bus Driver"
-	depends on OF && PM
-	help
-	  Driver for transparent busses that don't need a real driver, but
-	  where the bus controller is part of a PM domain, or under the control
-	  of a functional clock, and thus relies on runtime PM for managing
-	  this PM domain and/or clock.
-	  An example of such a bus controller is the Renesas Bus State
-	  Controller (BSC, sometimes called "LBSC within Bus Bridge", or
-	  "External Bus Interface") as found on several Renesas ARM SoCs.
-
 config SUN50I_DE2_BUS
 	bool "Allwinner A64 DE2 Bus Driver"
 	  default ARM64

drivers/bus/Makefile

@@ -27,7 +27,7 @@ obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
 obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
 obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
-obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
+obj-$(CONFIG_OF)		+= simple-pm-bus.o
 obj-$(CONFIG_TEGRA_ACONNECT)	+= tegra-aconnect.o
 obj-$(CONFIG_TEGRA_GMI)		+= tegra-gmi.o
 obj-$(CONFIG_TI_PWMSS)		+= ti-pwmss.o

drivers/soc/canaan/Kconfig

@@ -5,7 +5,6 @@ config SOC_K210_SYSCTL
 	depends on RISCV && SOC_CANAAN && OF
 	default SOC_CANAAN
         select PM
-        select SIMPLE_PM_BUS
         select SYSCON
         select MFD_SYSCON
 	help