fbdev: s3c2410fb: remove mach header dependency

The s3c2410fb driver is too deeply intertwined with the s3c24xx
platform code. Change it in a way that avoids the use of platform
header files but having all interface data in a platform_data
header, and the private register definitions next to the driver
itself.

One ugly bit here is that the driver pokes directly into gpio
registers, which are owned by another driver. Passing the
mapped addresses in platform_data is somewhat suboptimal, but
it is a small improvement over the previous version.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-33-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm/mach-s3c24xx/include/mach/fb.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/fb-s3c2410.h>

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -29,9 +29,8 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
-#include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
@@ -191,13 +190,17 @@ static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
 
 	.gpccon =	0xaaaaaaaa,
 	.gpccon_mask =	0xffffffff,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpdcon =	0xaaaaaaaa,
 	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000ffff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 #endif
 

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -28,7 +28,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -24,12 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>

arch/arm/mach-s3c24xx/mach-bast.c

@@ -40,9 +40,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -57,8 +57,8 @@
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
-#include <mach/fb.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
 #include <mach/gpio-samsung.h>

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -47,11 +47,10 @@
 
 #include <sound/uda1380.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
@@ -210,12 +209,16 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.lpcsel =	0x02,
 	.gpccon =	0xaa940659,
 	.gpccon_mask =	0xffffc0f0,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 	.gpdcon =	0xaa84aaa0,
 	.gpdcon_mask =	0xffffffff,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000faff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 static int power_supply_init(struct device *dev)

arch/arm/mach-s3c24xx/mach-jive.c

@@ -32,8 +32,7 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/gpio-samsung.h>
 
 #include <asm/mach-types.h>
@@ -320,6 +319,7 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
 	 * data. */
 
 	.gpcup		= (0xf << 1) | (0x3f << 10),
+	.gpcup_reg	= S3C2410_GPCUP,
 
 	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
 			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
@@ -333,8 +333,12 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
 			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 
+	.gpccon_reg	= S3C2410_GPCCON,
+
 	.gpdup		= (0x3f << 2) | (0x3f << 10),
 
+	.gpdup_reg	= S3C2410_GPDUP,
+
 	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
 			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
 			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
@@ -348,6 +352,8 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
 			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg	= S3C2410_GPDCON,
 };
 
 /* ILI9320 support. */

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -30,12 +30,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
 #include <mach/irqs.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -213,6 +212,9 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 
+	.gpccon_reg	= S3C2410_GPCCON,
+	.gpcup_reg	= S3C2410_GPCUP,
+
 	.gpdup		= (0x3f << 2) | (0x3f << 10),
 
 	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
@@ -228,6 +230,9 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+	.gpdcon_reg	= S3C2410_GPDCON,
+	.gpdup_reg	= S3C2410_GPDUP,
 };
 
 /* MMC/SD  */

arch/arm/mach-s3c24xx/mach-n30.c

@@ -31,10 +31,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -42,7 +42,6 @@
 #include <plat/gpio-cfg.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -32,8 +32,7 @@
 #include <asm/mach-types.h>
 
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -42,12 +42,11 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <sound/uda1380.h>
 
-#include <mach/fb.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
 #include <plat/cpu.h>
@@ -360,14 +359,17 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.lpcsel = 0x02,
 	.gpccon = 0xaa9556a9,
 	.gpccon_mask = 0xffc003fc,
+	.gpccon_reg = S3C2410_GPCCON,
 	.gpcup = 0x0000ffff,
 	.gpcup_mask = 0xffffffff,
+	.gpcup_reg = S3C2410_GPCUP,
 
 	.gpdcon = 0xaa90aaa1,
 	.gpdcon_mask = 0xffc0fff0,
+	.gpdcon_reg = S3C2410_GPDCON,
 	.gpdup = 0x0000fcfd,
 	.gpdup_mask = 0xffffffff,
-
+	.gpdup_reg = S3C2410_GPDUP,
 };
 
 static struct pwm_lookup rx1950_pwm_lookup[] = {

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -30,13 +30,12 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/fb.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
@@ -124,13 +123,17 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 
 	.gpccon =	0xaa955699,
 	.gpccon_mask =	0xffc003cc,
+	.gpccon_reg =	S3C2410_GPCCON,
 	.gpcup =	0x0000ffff,
 	.gpcup_mask =	0xffffffff,
+	.gpcup_reg =	S3C2410_GPCUP,
 
 	.gpdcon =	0xaa95aaa1,
 	.gpdcon_mask =	0xffc0fff0,
+	.gpdcon_reg =	S3C2410_GPDCON,
 	.gpdup =	0x0000faff,
 	.gpdup_mask =	0xffffffff,
+	.gpdup_reg =	S3C2410_GPDUP,
 };
 
 static struct mtd_partition __initdata rx3715_nand_part[] = {

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -31,12 +31,11 @@
 
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <mach/gpio-samsung.h>
-#include <mach/fb.h>
 #include <plat/gpio-cfg.h>
 
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -30,7 +30,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/gpio-samsung.h>
 

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -27,11 +27,10 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
@@ -137,6 +136,11 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
 	.gpdcon_mask	= 0xffffffff,
 	.gpdup		= 0x0000faff,
 	.gpdup_mask	= 0xffffffff,
+
+	.gpccon_reg	= S3C2410_GPCCON,
+	.gpcup_reg	= S3C2410_GPCUP,
+	.gpdcon_reg	= S3C2410_GPDCON,
+	.gpdup_reg	= S3C2410_GPDUP,
 #endif
 
 	.lpcsel		= ((0xCE6) & ~7) | 1<<4,

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -26,9 +26,8 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -29,11 +29,10 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>

arch/arm/plat-samsung/devs.c

@@ -52,7 +52,7 @@
 #include <linux/soc/samsung/s3c-adc.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
 #include <linux/platform_data/hwmon-s3c.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>

arch/arm/mach-s3c24xx/include/mach/regs-lcd.h → drivers/video/fbdev/s3c2410fb-regs-lcd.h

@@ -7,6 +7,13 @@
 #ifndef ___ASM_ARCH_REGS_LCD_H
 #define ___ASM_ARCH_REGS_LCD_H
 
+/*
+ * a couple of values are used as platform data in
+ * include/linux/platform_data/fb-s3c2410.h and not
+ * duplicated here.
+ */
+#include <linux/platform_data/fb-s3c2410.h>
+
 #define S3C2410_LCDREG(x)	(x)
 
 /* LCD control registers */
@@ -29,13 +36,6 @@
 #define S3C2410_LCDCON1_STN8BPP	   (3<<1)
 #define S3C2410_LCDCON1_STN12BPP   (4<<1)
 
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
 #define S3C2410_LCDCON1_ENVID	   (1)
 
 #define S3C2410_LCDCON1_MODEMASK    0x1E
@@ -66,20 +66,6 @@
 
 #define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
 
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
 /* framebuffer start addressed */
 #define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
 #define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)

drivers/video/fbdev/s3c2410fb.c

@@ -29,19 +29,18 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
 #endif
 
 #include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
 
 /* Debugging stuff */
 static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG);
@@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg,
 {
 	unsigned long tmp;
 
+	if (!reg)
+		return;
+
 	tmp = readl(reg) & ~mask;
 	writel(tmp | set, reg);
 }
@@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info)
 
 	/* modify the gpio(s) with interrupts set (bjd) */
 
-	modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
-	modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
-	modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
-	modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+	modify_gpio(mach_info->gpcup_reg,  mach_info->gpcup,  mach_info->gpcup_mask);
+	modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+	modify_gpio(mach_info->gpdup_reg,  mach_info->gpdup,  mach_info->gpdup_mask);
+	modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
 
 	local_irq_restore(flags);
 

arch/arm/plat-samsung/include/plat/fb-s3c2410.h → include/linux/platform_data/fb-s3c2410.h

@@ -8,6 +8,8 @@
 #ifndef __ASM_PLAT_FB_S3C2410_H
 #define __ASM_PLAT_FB_S3C2410_H __FILE__
 
+#include <linux/compiler_types.h>
+
 struct s3c2410fb_hw {
 	unsigned long	lcdcon1;
 	unsigned long	lcdcon2;
@@ -20,6 +22,17 @@ struct s3c2410fb_hw {
 struct s3c2410fb_display {
 	/* LCD type */
 	unsigned type;
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
 
 	/* Screen size */
 	unsigned short width;
@@ -40,6 +53,19 @@ struct s3c2410fb_display {
 
 	/* lcd configuration registers */
 	unsigned long	lcdcon5;
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
 };
 
 struct s3c2410fb_mach_info {
@@ -59,10 +85,15 @@ struct s3c2410fb_mach_info {
 	unsigned long	gpdcon;
 	unsigned long	gpdcon_mask;
 
+	void __iomem *  gpccon_reg;
+	void __iomem *  gpcup_reg;
+	void __iomem *  gpdcon_reg;
+	void __iomem *  gpdup_reg;
+
 	/* lpc3600 control register */
 	unsigned long	lpcsel;
 };
 
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
 
 #endif /* __ASM_PLAT_FB_S3C2410_H */