tg3: implement ethtool set_phys_id

Implement control of LED via set_phys_id.
Note: since PHY is powered off if device is down, this board
only allows blinking if device is up.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tg3.c

@@ -10341,35 +10341,38 @@ static void tg3_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 	}
 }
 
-static int tg3_phys_id(struct net_device *dev, u32 data)
+static int tg3_set_phys_id(struct net_device *dev,
+			    enum ethtool_phys_id_state state)
 {
 	struct tg3 *tp = netdev_priv(dev);
-	int i;
 
 	if (!netif_running(tp->dev))
 		return -EAGAIN;
 
-	if (data == 0)
-		data = UINT_MAX / 2;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return -EINVAL;
 
-	for (i = 0; i < (data * 2); i++) {
-		if ((i % 2) == 0)
-			tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
-					   LED_CTRL_1000MBPS_ON |
-					   LED_CTRL_100MBPS_ON |
-					   LED_CTRL_10MBPS_ON |
-					   LED_CTRL_TRAFFIC_OVERRIDE |
-					   LED_CTRL_TRAFFIC_BLINK |
-					   LED_CTRL_TRAFFIC_LED);
+	case ETHTOOL_ID_ON:
+		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+		     LED_CTRL_1000MBPS_ON |
+		     LED_CTRL_100MBPS_ON |
+		     LED_CTRL_10MBPS_ON |
+		     LED_CTRL_TRAFFIC_OVERRIDE |
+		     LED_CTRL_TRAFFIC_BLINK |
+		     LED_CTRL_TRAFFIC_LED);
+		break;
 
-		else
-			tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
-					   LED_CTRL_TRAFFIC_OVERRIDE);
+	case ETHTOOL_ID_OFF:
+		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+		     LED_CTRL_TRAFFIC_OVERRIDE);
+		break;
 
-		if (msleep_interruptible(500))
-			break;
+	case ETHTOOL_ID_INACTIVE:
+		tw32(MAC_LED_CTRL, tp->led_ctrl);
+		break;
 	}
-	tw32(MAC_LED_CTRL, tp->led_ctrl);
+
 	return 0;
 }
 
@@ -11394,7 +11397,7 @@ static const struct ethtool_ops tg3_ethtool_ops = {
 	.set_tso		= tg3_set_tso,
 	.self_test		= tg3_self_test,
 	.get_strings		= tg3_get_strings,
-	.phys_id		= tg3_phys_id,
+	.set_phys_id		= tg3_set_phys_id,
 	.get_ethtool_stats	= tg3_get_ethtool_stats,
 	.get_coalesce		= tg3_get_coalesce,
 	.set_coalesce		= tg3_set_coalesce,