ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes

PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am571x-idk.dts

@@ -170,10 +170,6 @@ &pcie1_rc {
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mmc1 {
 	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;

arch/arm/boot/dts/am572x-idk-common.dtsi

@@ -147,10 +147,6 @@ &pcie1_rc {
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -547,10 +547,6 @@ &pcie1_rc {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;