wifi: ath11k: stop tx queues immediately upon firmware exit

Currently, recovery flag is set immediately upon firmware
exit but tx queues are stopped once firmware arrives back
and is ready which is during ath11k_core_restart. Once
ieee80211 hw restart is completed, tx queues are resumed.
If during the time delta between firmware exit and firmware
ready, mac80211 send packets, currently ath11k will drop it
since recovery flag will be set. But warning prints will
come -
  "ath11k c000000.wifi: failed to transmit frame -108"

If more tx packets are there, this could lead to flooding
of above print.

However, actually tx queues should be stopped immediately
when firmware leaves. This will prevent packets to get
dropped when firmware is recovering.

Add fix to stop tx queues immediately after firmware exit.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com

drivers/net/wireless/ath/ath11k/core.c

@@ -1641,7 +1641,7 @@ static void ath11k_update_11d(struct work_struct *work)
 	}
 }
 
-static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
+void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
 {
 	struct ath11k *ar;
 	struct ath11k_pdev *pdev;
@@ -1730,9 +1730,6 @@ static void ath11k_core_restart(struct work_struct *work)
 	struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work);
 	int ret;
 
-	if (!ab->is_reset)
-		ath11k_core_pre_reconfigure_recovery(ab);
-
 	ret = ath11k_core_reconfigure_on_crash(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to reconfigure driver on crash recovery\n");

drivers/net/wireless/ath/ath11k/core.h

@@ -1157,6 +1157,7 @@ int ath11k_core_check_smbios(struct ath11k_base *ab);
 void ath11k_core_halt(struct ath11k *ar);
 int ath11k_core_resume(struct ath11k_base *ab);
 int ath11k_core_suspend(struct ath11k_base *ab);
+void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab);
 
 const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
 						    const char *filename);

drivers/net/wireless/ath/ath11k/qmi.c

@@ -3158,6 +3158,9 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)
 		case ATH11K_QMI_EVENT_SERVER_EXIT:
 			set_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags);
 			set_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags);
+
+			if (!ab->is_reset)
+				ath11k_core_pre_reconfigure_recovery(ab);
 			break;
 		case ATH11K_QMI_EVENT_REQUEST_MEM:
 			ret = ath11k_qmi_event_mem_request(qmi);