Commit 81e78dea authored by Naveen Kumar Gaddipati's avatar Naveen Kumar Gaddipati Committed by Dmitry Torokhov

Input: bu21013_ts - added regulator support

Add regulator support in ROHM BU21013 touch panel driver.
Signed-off-by: default avatarNaveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent d2763b4f
......@@ -12,6 +12,7 @@
#include <linux/input.h>
#include <linux/input/bu21013.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
......@@ -139,6 +140,7 @@
* @chip: pointer to the touch panel controller
* @in_dev: pointer to the input device structure
* @intr_pin: interrupt pin value
* @regulator: pointer to the Regulator used for touch screen
*
* Touch panel device data structure
*/
......@@ -149,6 +151,7 @@ struct bu21013_ts_data {
const struct bu21013_platform_device *chip;
struct input_dev *in_dev;
unsigned int intr_pin;
struct regulator *regulator;
};
/**
......@@ -456,6 +459,20 @@ static int __devinit bu21013_probe(struct i2c_client *client,
bu21013_data->in_dev = in_dev;
bu21013_data->chip = pdata;
bu21013_data->client = client;
bu21013_data->regulator = regulator_get(&client->dev, "V-TOUCH");
if (IS_ERR(bu21013_data->regulator)) {
dev_err(&client->dev, "regulator_get failed\n");
error = PTR_ERR(bu21013_data->regulator);
goto err_free_mem;
}
error = regulator_enable(bu21013_data->regulator);
if (error < 0) {
dev_err(&client->dev, "regulator enable failed\n");
goto err_put_regulator;
}
bu21013_data->touch_stopped = false;
init_waitqueue_head(&bu21013_data->wait);
......@@ -464,7 +481,7 @@ static int __devinit bu21013_probe(struct i2c_client *client,
error = pdata->cs_en(pdata->cs_pin);
if (error < 0) {
dev_err(&client->dev, "chip init failed\n");
goto err_free_mem;
goto err_disable_regulator;
}
}
......@@ -513,6 +530,10 @@ static int __devinit bu21013_probe(struct i2c_client *client,
bu21013_free_irq(bu21013_data);
err_cs_disable:
pdata->cs_dis(pdata->cs_pin);
err_disable_regulator:
regulator_disable(bu21013_data->regulator);
err_put_regulator:
regulator_put(bu21013_data->regulator);
err_free_mem:
input_free_device(in_dev);
kfree(bu21013_data);
......@@ -535,6 +556,10 @@ static int __devexit bu21013_remove(struct i2c_client *client)
bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin);
input_unregister_device(bu21013_data->in_dev);
regulator_disable(bu21013_data->regulator);
regulator_put(bu21013_data->regulator);
kfree(bu21013_data);
device_init_wakeup(&client->dev, false);
......@@ -561,6 +586,8 @@ static int bu21013_suspend(struct device *dev)
else
disable_irq(bu21013_data->chip->irq);
regulator_disable(bu21013_data->regulator);
return 0;
}
......@@ -577,6 +604,12 @@ static int bu21013_resume(struct device *dev)
struct i2c_client *client = bu21013_data->client;
int retval;
retval = regulator_enable(bu21013_data->regulator);
if (retval < 0) {
dev_err(&client->dev, "bu21013 regulator enable failed\n");
return retval;
}
retval = bu21013_init_chip(bu21013_data);
if (retval < 0) {
dev_err(&client->dev, "bu21013 controller config failed\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment