Commit 8209eefa authored by Thierry Reding's avatar Thierry Reding

memory: tegra: Implement EMC debugfs interface on Tegra20

A common debugfs interface is already available on Tegra124, Tegra186
and Tegra194. Implement the same interface on Tegra20 to enable testing
of the EMC frequency scaling code using a unified interface.
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 6b9acd93
......@@ -8,6 +8,7 @@
#include <linux/clk.h>
#include <linux/clk/tegra.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
......@@ -150,6 +151,12 @@ struct tegra_emc {
struct emc_timing *timings;
unsigned int num_timings;
struct {
struct dentry *root;
unsigned long min_rate;
unsigned long max_rate;
} debugfs;
};
static irqreturn_t tegra_emc_isr(int irq, void *data)
......@@ -478,6 +485,171 @@ static long emc_round_rate(unsigned long rate,
return timing->rate;
}
/*
* debugfs interface
*
* The memory controller driver exposes some files in debugfs that can be used
* to control the EMC frequency. The top-level directory can be found here:
*
* /sys/kernel/debug/emc
*
* It contains the following files:
*
* - available_rates: This file contains a list of valid, space-separated
* EMC frequencies.
*
* - min_rate: Writing a value to this file sets the given frequency as the
* floor of the permitted range. If this is higher than the currently
* configured EMC frequency, this will cause the frequency to be
* increased so that it stays within the valid range.
*
* - max_rate: Similarily to the min_rate file, writing a value to this file
* sets the given frequency as the ceiling of the permitted range. If
* the value is lower than the currently configured EMC frequency, this
* will cause the frequency to be decreased so that it stays within the
* valid range.
*/
static bool tegra_emc_validate_rate(struct tegra_emc *emc, unsigned long rate)
{
unsigned int i;
for (i = 0; i < emc->num_timings; i++)
if (rate == emc->timings[i].rate)
return true;
return false;
}
static int tegra_emc_debug_available_rates_show(struct seq_file *s, void *data)
{
struct tegra_emc *emc = s->private;
const char *prefix = "";
unsigned int i;
for (i = 0; i < emc->num_timings; i++) {
seq_printf(s, "%s%lu", prefix, emc->timings[i].rate);
prefix = " ";
}
seq_puts(s, "\n");
return 0;
}
static int tegra_emc_debug_available_rates_open(struct inode *inode,
struct file *file)
{
return single_open(file, tegra_emc_debug_available_rates_show,
inode->i_private);
}
static const struct file_operations tegra_emc_debug_available_rates_fops = {
.open = tegra_emc_debug_available_rates_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int tegra_emc_debug_min_rate_get(void *data, u64 *rate)
{
struct tegra_emc *emc = data;
*rate = emc->debugfs.min_rate;
return 0;
}
static int tegra_emc_debug_min_rate_set(void *data, u64 rate)
{
struct tegra_emc *emc = data;
int err;
if (!tegra_emc_validate_rate(emc, rate))
return -EINVAL;
err = clk_set_min_rate(emc->clk, rate);
if (err < 0)
return err;
emc->debugfs.min_rate = rate;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(tegra_emc_debug_min_rate_fops,
tegra_emc_debug_min_rate_get,
tegra_emc_debug_min_rate_set, "%llu\n");
static int tegra_emc_debug_max_rate_get(void *data, u64 *rate)
{
struct tegra_emc *emc = data;
*rate = emc->debugfs.max_rate;
return 0;
}
static int tegra_emc_debug_max_rate_set(void *data, u64 rate)
{
struct tegra_emc *emc = data;
int err;
if (!tegra_emc_validate_rate(emc, rate))
return -EINVAL;
err = clk_set_max_rate(emc->clk, rate);
if (err < 0)
return err;
emc->debugfs.max_rate = rate;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(tegra_emc_debug_max_rate_fops,
tegra_emc_debug_max_rate_get,
tegra_emc_debug_max_rate_set, "%llu\n");
static void tegra_emc_debugfs_init(struct tegra_emc *emc)
{
struct device *dev = emc->dev;
unsigned int i;
int err;
emc->debugfs.min_rate = ULONG_MAX;
emc->debugfs.max_rate = 0;
for (i = 0; i < emc->num_timings; i++) {
if (emc->timings[i].rate < emc->debugfs.min_rate)
emc->debugfs.min_rate = emc->timings[i].rate;
if (emc->timings[i].rate > emc->debugfs.max_rate)
emc->debugfs.max_rate = emc->timings[i].rate;
}
err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
emc->debugfs.max_rate);
if (err < 0) {
dev_err(dev, "failed to set rate range [%lu-%lu] for %pC\n",
emc->debugfs.min_rate, emc->debugfs.max_rate,
emc->clk);
}
emc->debugfs.root = debugfs_create_dir("emc", NULL);
if (!emc->debugfs.root) {
dev_err(emc->dev, "failed to create debugfs directory\n");
return;
}
debugfs_create_file("available_rates", S_IRUGO, emc->debugfs.root,
emc, &tegra_emc_debug_available_rates_fops);
debugfs_create_file("min_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
emc, &tegra_emc_debug_min_rate_fops);
debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
emc, &tegra_emc_debug_max_rate_fops);
}
static int tegra_emc_probe(struct platform_device *pdev)
{
struct device_node *np;
......@@ -550,6 +722,9 @@ static int tegra_emc_probe(struct platform_device *pdev)
goto unset_cb;
}
platform_set_drvdata(pdev, emc);
tegra_emc_debugfs_init(emc);
return 0;
unset_cb:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment