Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for MIPSr5 and P5600 cores

 - converted Loongson PCI driver into a PCI host driver using the
   generic PCI framework

 - added emulation of CPUCFG command for Loogonson64 cpus

 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA

 - ioremap cleanup

 - fix for a race between two threads faulting the same page

 - various cleanups and fixes

* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
  MIPS: ralink: drop ralink_clk_init for mt7621
  MIPS: ralink: bootrom: mark a function as __init to save some memory
  MIPS: Loongson64: Reorder CPUCFG model match arms
  MIPS: Expose Loongson CPUCFG availability via HWCAP
  MIPS: Loongson64: Guard against future cores without CPUCFG
  MIPS: Fix build warning about "PTR_STR" redefinition
  MIPS: Loongson64: Remove not used pci.c
  MIPS: Loongson64: Define PCI_IOBASE
  MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
  MIPS: DTS: Fix build errors used with various configs
  MIPS: Loongson64: select NO_EXCEPT_FILL
  MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
  MIPS: mm: add page valid judgement in function pte_modify
  mm/memory.c: Add memory read privilege on page fault handling
  mm/memory.c: Update local TLB if PTE entry exists
  MIPS: Do not flush tlb page when updating PTE entry
  MIPS: ingenic: Default to a generic board
  MIPS: ingenic: Add support for GCW Zero prototype
  MIPS: ingenic: DTS: Add memory info of GCW Zero
  MIPS: Loongson64: Switch to generic PCI driver
  ...

Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson RS780E PCH ACPI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This controller can be found in Loongson-3 systems with RS780E PCH.
+
+properties:
+  compatible:
+    const: loongson,rs780e-acpi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    isa@0 {
+      compatible = "isa";
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0 0x1000>;
+
+      acpi@800 {
+        compatible = "loongson,rs780e-acpi";
+        reg = <1 0x800 0x100>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/pci/loongson.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+  PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls2k-pci
+      - const: loongson,ls7a-pci
+      - const: loongson,rs780e-pci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: CFG0 standard config space register
+      - description: CFG1 extended config space register
+
+  ranges:
+    minItems: 1
+    maxItems: 3
+
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1a000000 {
+            compatible = "loongson,rs780e-pci";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x1a000000  0x0 0x2000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x00004000  0x0 0x00004000  0x0 0x00004000>,
+                     <0x02000000 0x0 0x40000000  0x0 0x40000000  0x0 0x40000000>;
+        };
+    };
+...

arch/mips/Kbuild

@@ -12,7 +12,7 @@ obj-y := $(platform-y)
 
 # make clean traverses $(obj-) without having included .config, so
 # everything ends up here
-obj- := $(platform-)
+obj- := $(platform-y)
 
 # mips object files
 # The object files are linked as core-y files would be linked

arch/mips/Kbuild.platforms

 # SPDX-License-Identifier: GPL-2.0
 # All platforms listed in alphabetic order
 
-platforms += alchemy
-platforms += ar7
-platforms += ath25
-platforms += ath79
-platforms += bcm47xx
-platforms += bcm63xx
-platforms += bmips
-platforms += cavium-octeon
-platforms += cobalt
-platforms += dec
-platforms += emma
-platforms += generic
-platforms += jazz
-platforms += jz4740
-platforms += lantiq
-platforms += lasat
-platforms += loongson2ef
-platforms += loongson32
-platforms += loongson64
-platforms += mti-malta
-platforms += netlogic
-platforms += paravirt
-platforms += pic32
-platforms += pistachio
-platforms += pmcs-msp71xx
-platforms += pnx833x
-platforms += ralink
-platforms += rb532
-platforms += sgi-ip22
-platforms += sgi-ip27
-platforms += sgi-ip30
-platforms += sgi-ip32
-platforms += sibyte
-platforms += sni
-platforms += txx9
-platforms += vr41xx
+platform-$(CONFIG_MIPS_ALCHEMY)		+= alchemy/
+platform-$(CONFIG_AR7)			+= ar7/
+platform-$(CONFIG_ATH25)		+= ath25/
+platform-$(CONFIG_ATH79)		+= ath79/
+platform-$(CONFIG_BCM47XX)		+= bcm47xx/
+platform-$(CONFIG_BCM63XX)		+= bcm63xx/
+platform-$(CONFIG_BMIPS_GENERIC)	+= bmips/
+platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
+platform-$(CONFIG_MIPS_COBALT)		+= cobalt/
+platform-$(CONFIG_MACH_DECSTATION)	+= dec/
+platform-$(CONFIG_MIPS_GENERIC)		+= generic/
+platform-$(CONFIG_MACH_JAZZ)		+= jazz/
+platform-$(CONFIG_MACH_INGENIC)		+= jz4740/
+platform-$(CONFIG_LANTIQ)		+= lantiq/
+platform-$(CONFIG_MACH_LOONGSON2EF)	+= loongson2ef/
+platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
+platform-$(CONFIG_MACH_LOONGSON64)	+= loongson64/
+platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
+platform-$(CONFIG_NLM_COMMON)		+= netlogic/
+platform-$(CONFIG_MIPS_PARAVIRT)	+= paravirt/
+platform-$(CONFIG_PIC32MZDA)		+= pic32/
+platform-$(CONFIG_MACH_PISTACHIO)	+= pistachio/
+platform-$(CONFIG_SOC_PNX833X)		+= pnx833x/
+platform-$(CONFIG_RALINK)		+= ralink/
+platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
+platform-$(CONFIG_SGI_IP22)		+= sgi-ip22/
+platform-$(CONFIG_SGI_IP27)		+= sgi-ip27/
+platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
+platform-$(CONFIG_SGI_IP30)		+= sgi-ip30/
+platform-$(CONFIG_SGI_IP32)		+= sgi-ip32/
+platform-$(CONFIG_SIBYTE_BCM112X)	+= sibyte/
+platform-$(CONFIG_SIBYTE_SB1250)	+= sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x55)	+= sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x80)	+= sibyte/
+platform-$(CONFIG_SNI_RM)		+= sni/
+platform-$(CONFIG_MACH_TX39XX)		+= txx9/
+platform-$(CONFIG_MACH_TX49XX)		+= txx9/
+platform-$(CONFIG_MACH_VR41XX)		+= vr41xx/
 
 # include the platform specific files
-include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
+include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platform-y))

arch/mips/Kconfig

@@ -92,6 +92,9 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
+config MIPS_FIXUP_BIGPHYS_ADDR
+	bool
+
 menu "Machine selection"
 
 choice
@@ -157,6 +160,7 @@ config MIPS_ALCHEMY
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
+	select MIPS_FIXUP_BIGPHYS_ADDR if PCI
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
@@ -427,23 +431,6 @@ config LANTIQ
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 
-config LASAT
-	bool "LASAT Networks platforms"
-	select CEVT_R4K
-	select CRC32
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select PCI_GT64XXX_PCI0
-	select MIPS_NILE4
-	select R5000_CPU_SCACHE
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config MACH_LOONGSON32
 	bool "Loongson 32-bit family of machines"
 	select SYS_SUPPORTS_ZBOOT
@@ -475,8 +462,10 @@ config MACH_LOONGSON64
 	select ISA
 	select I8259
 	select IRQ_MIPS_CPU
-	select NR_CPUS_DEFAULT_4
+	select NO_EXCEPT_FILL
+	select NR_CPUS_DEFAULT_64
 	select USE_GENERIC_EARLY_PRINTK_8250
+	select PCI_DRIVERS_GENERIC
 	select SYS_HAS_CPU_LOONGSON64
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_SMP
@@ -593,13 +582,6 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
-config NEC_MARKEINS
-	bool "NEC EMMA2RH Mark-eins board"
-	select SOC_EMMA2RH
-	select HAVE_PCI
-	help
-	  This enables support for the NEC Electronics Mark-eins boards.
-
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
 	select CEVT_R4K
@@ -621,30 +603,6 @@ config NXP_STB225
 	help
 	  Support for NXP Semiconductors STB225 Development Board.
 
-config PMC_MSP
-	bool "PMC-Sierra MSP chipsets"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SWAP_IO_SPACE
-	select NO_EXCEPT_FILL
-	select BOOT_RAW
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_MIPS16
-	select IRQ_MIPS_CPU
-	select SERIAL_8250
-	select SERIAL_8250_CONSOLE
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USB_EHCI_BIG_ENDIAN_DESC
-	help
-	  This adds support for the PMC-Sierra family of Multi-Service
-	  Processor System-On-A-Chips.  These parts include a number
-	  of integrated peripherals, interfaces and DSPs in addition to
-	  a variety of MIPS cores.
-
 config RALINK
 	bool "Ralink based machines"
 	select CEVT_R4K
@@ -1087,10 +1045,8 @@ source "arch/mips/generic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
-source "arch/mips/lasat/Kconfig"
 source "arch/mips/pic32/Kconfig"
 source "arch/mips/pistachio/Kconfig"
-source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -1154,6 +1110,7 @@ config CSRC_IOASIC
 	bool
 
 config CSRC_R4K
+	select CLOCKSOURCE_WATCHDOG if CPU_FREQ
 	bool
 
 config CSRC_SB1250
@@ -1211,9 +1168,6 @@ config MIPS_BONITO64
 config MIPS_MSC
 	bool
 
-config MIPS_NILE4
-	bool
-
 config SYNC_R4K
 	bool
 
@@ -1334,18 +1288,6 @@ config PCI_XTALK_BRIDGE
 config NO_EXCEPT_FILL
 	bool
 
-config SOC_EMMA2RH
-	bool
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_MIPS_CPU
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_R5500
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-
 config SOC_PNX833X
 	bool
 	select CEVT_R4K
@@ -1419,9 +1361,6 @@ config MIPS_L1_CACHE_SHIFT
 	default "4" if MIPS_L1_CACHE_SHIFT_4
 	default "5"
 
-config HAVE_STD_PC_SERIAL_PORT
-	bool
-
 config ARC_CMDLINE_ONLY
 	bool
 
@@ -1504,6 +1443,18 @@ config CPU_LOONGSON3_WORKAROUNDS
 
 	  If unsure, please say Y.
 
+config CPU_LOONGSON3_CPUCFG_EMULATION
+	bool "Emulate the CPUCFG instruction on older Loongson cores"
+	default y
+	depends on CPU_LOONGSON64
+	help
+	  Loongson-3A R4 and newer have the CPUCFG instruction available for
+	  userland to query CPU capabilities, much like CPUID on x86. This
+	  option provides emulation of the instruction on older Loongson
+	  cores, back to Loongson-3A1000.
+
+	  If unsure, please say Y.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1580,6 +1531,21 @@ config CPU_MIPS32_R2
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
+config CPU_MIPS32_R5
+	bool "MIPS32 Release 5"
+	depends on SYS_HAS_CPU_MIPS32_R5
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_MSA
+	select HAVE_KVM
+	select MIPS_O32_FP64_SUPPORT
+	help
+	  Choose this option to build a kernel for release 5 or later of the
+	  MIPS32 architecture.  New MIPS processors, starting with the Warrior
+	  family, are based on a MIPS32r5 processor. If you own an older
+	  processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
+
 config CPU_MIPS32_R6
 	bool "MIPS32 Release 6"
 	depends on SYS_HAS_CPU_MIPS32_R6
@@ -1632,6 +1598,23 @@ config CPU_MIPS64_R2
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
+config CPU_MIPS64_R5
+	bool "MIPS64 Release 5"
+	depends on SYS_HAS_CPU_MIPS64_R5
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
+	select CPU_SUPPORTS_MSA
+	select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
+	select HAVE_KVM
+	help
+	  Choose this option to build a kernel for release 5 or later of the
+	  MIPS64 architecture.  This is a intermediate MIPS architecture
+	  release partly implementing release 6 features. Though there is no
+	  any hardware known to be based on this release.
+
 config CPU_MIPS64_R6
 	bool "MIPS64 Release 6"
 	depends on SYS_HAS_CPU_MIPS64_R6
@@ -1650,6 +1633,28 @@ config CPU_MIPS64_R6
 	  family, are based on a MIPS64r6 processor. If you own an older
 	  processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
 
+config CPU_P5600
+	bool "MIPS Warrior P5600"
+	depends on SYS_HAS_CPU_P5600
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_MSA
+	select CPU_SUPPORTS_UNCACHED_ACCELERATED
+	select CPU_SUPPORTS_CPUFREQ
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select HAVE_KVM
+	select MIPS_O32_FP64_SUPPORT
+	help
+	  Choose this option to build a kernel for MIPS Warrior P5600 CPU.
+	  It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
+	  MMU with two-levels TLB, UCA, MSA, MDU core level features and system
+	  level features like up to six P5600 calculation cores, CM2 with L2
+	  cache, IOCU/IOMMU (though might be unused depending on the system-
+	  specific IP core configuration), GIC, CPC, virtualisation module,
+	  eJTAG and PDtrace.
+
 config CPU_R3000
 	bool "R3000"
 	depends on SYS_HAS_CPU_R3000
@@ -1826,7 +1831,8 @@ endchoice
 config CPU_MIPS32_3_5_FEATURES
 	bool "MIPS32 Release 3.5 Features"
 	depends on SYS_HAS_CPU_MIPS32_R3_5
-	depends on CPU_MIPS32_R2 || CPU_MIPS32_R6
+	depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
+		   CPU_P5600
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS32 architecture including features from the 3.5 release such as
@@ -1846,7 +1852,7 @@ config CPU_MIPS32_3_5_EVA
 config CPU_MIPS32_R5_FEATURES
 	bool "MIPS32 Release 5 Features"
 	depends on SYS_HAS_CPU_MIPS32_R5
-	depends on CPU_MIPS32_R2
+	depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS32 architecture including features from release 5 such as
@@ -2001,6 +2007,10 @@ config SYS_HAS_CPU_MIPS64_R6
 	bool
 	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
+config SYS_HAS_CPU_P5600
+	bool
+	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
 config SYS_HAS_CPU_R3000
 	bool
 
@@ -2084,11 +2094,13 @@ endmenu
 #
 config CPU_MIPS32
 	bool
-	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
+	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
+		     CPU_MIPS32_R6 || CPU_P5600
 
 config CPU_MIPS64
 	bool
-	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
+	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
+		     CPU_MIPS64_R6
 
 #
 # These indicate the revision of the architecture
@@ -2104,6 +2116,13 @@ config CPU_MIPSR2
 	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
 	select MIPS_SPRAM
 
+config CPU_MIPSR5
+	bool
+	default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600
+	select CPU_HAS_RIXI
+	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
+	select MIPS_SPRAM
+
 config CPU_MIPSR6
 	bool
 	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
@@ -2118,6 +2137,7 @@ config TARGET_ISA_REV
 	int
 	default 1 if CPU_MIPSR1
 	default 2 if CPU_MIPSR2
+	default 5 if CPU_MIPSR5
 	default 6 if CPU_MIPSR6
 	default 0
 	help
@@ -2707,7 +2727,11 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
 
 config RELOCATABLE
 	bool "Relocatable kernel"
-	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
+	depends on SYS_SUPPORTS_RELOCATABLE
+	depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
+		   CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
+		   CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
+		   CPU_P5600 || CAVIUM_OCTEON_SOC
 	help
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -3275,3 +3299,5 @@ endmenu
 source "drivers/firmware/Kconfig"
 
 source "arch/mips/kvm/Kconfig"
+
+source "arch/mips/vdso/Kconfig"

arch/mips/Kconfig.debug

@@ -148,4 +148,14 @@ config MIPS_CPS_NS16550_SHIFT
 	  form their addresses. That is, log base 2 of the span between
 	  adjacent ns16550 registers in the system.
 
+config MIPS_CPS_NS16550_WIDTH
+	int "UART Register Width"
+	default 1
+	help
+	  ns16550 registers width. UART registers IO access methods will be
+	  selected in accordance with this parameter. By setting it to 1, 2 or
+	  4 UART registers will be accessed by means of lb/sb, lh/sh or lw/sw
+	  instructions respectively. Any value not from that set activates
+	  lb/sb instructions.
+
 endif # MIPS_CPS_NS16550_BOOL

arch/mips/Makefile

@@ -116,33 +116,8 @@ endif
 
 cflags-y += -ffreestanding
 
-#
-# We explicitly add the endianness specifier if needed, this allows
-# to compile kernels with a toolchain for the other endianness. We
-# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
-# when fed the toolchain default!
-#
-# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of
-# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
-# are used, so we kludge that here.  A bug has been filed at
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
-#
-# clang doesn't suffer from these issues and our checks against -dumpmachine
-# don't work so well when cross compiling, since without providing --target
-# clang's output will be based upon the build machine. So for clang we simply
-# unconditionally specify -EB or -EL as appropriate.
-#
-ifdef CONFIG_CC_IS_CLANG
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -EB
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -EL
-else
-undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__
-undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__
-predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__
-predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
-cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
-endif
 
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
@@ -171,10 +146,13 @@ cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R5)	+= -march=mips32r5 -Wa,--trap -modd-spreg
 cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
 cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R5)	+= -march=mips64r5 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R6)	+= -march=mips64r6 -Wa,--trap
+cflags-$(CONFIG_CPU_P5600)	+= -march=p5600 -Wa,--trap -modd-spreg
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=r5000) \
 			-Wa,--trap
@@ -288,12 +266,23 @@ ifdef CONFIG_64BIT
   endif
 endif
 
+# When linking a 32-bit executable the LLVM linker cannot cope with a
+# 32-bit load address that has been sign-extended to 64 bits.  Simply
+# remove the upper 32 bits then, as it is safe to do so with other
+# linkers.
+ifdef CONFIG_64BIT
+	load-ld			= $(load-y)
+else
+	load-ld			= $(subst 0xffffffff,0x,$(load-y))
+endif
+
 KBUILD_AFLAGS	+= $(cflags-y)
 KBUILD_CFLAGS	+= $(cflags-y)
-KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
+KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  LINKER_LOAD_ADDRESS=$(load-ld) \
 		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
 		  PLATFORM="$(platform-y)" \
 		  ITS_INPUTS="$(its-y)"
@@ -359,12 +348,6 @@ ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
 bootz-y			+= uzImage.bin
 endif
 
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
-		$(bootvars-y) $@
-endif
-
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -430,7 +413,6 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/mips/boot
 	$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
 	$(Q)$(MAKE) $(clean)=arch/mips/boot/tools
-	$(Q)$(MAKE) $(clean)=arch/mips/lasat
 
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all

arch/mips/alchemy/Platform

@@ -15,19 +15,16 @@ load-$(CONFIG_MIPS_DB1XXX)	+= 0xffffffff80100000
 #
 # 4G-Systems MTX-1 "MeshCube" wireless router
 #
-platform-$(CONFIG_MIPS_MTX1)	+= alchemy/
 load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500) += alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
 # Trapeze ITS GRP board
 #
-platform-$(CONFIG_MIPS_GPR)	+= alchemy/
 load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.

arch/mips/alchemy/common/setup.c

@@ -27,6 +27,7 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/mm.h>
 
 #include <asm/dma-coherence.h>
 #include <asm/mipsregs.h>
@@ -72,9 +73,9 @@ void __init plat_mem_setup(void)
 	iomem_resource.end = IOMEM_RESOURCE_END;
 }
 
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
 /* This routine should be valid for all Au1x based boards */
-phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 {
 	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
 	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
@@ -90,5 +91,13 @@ phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 	/* default nop */
 	return phys_addr;
 }
-EXPORT_SYMBOL(__fixup_bigphys_addr);
-#endif
+
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+	return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+}
+EXPORT_SYMBOL(io_remap_pfn_range);
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */

arch/mips/alchemy/devboards/db1550.c

@@ -225,7 +225,7 @@ static void __init pb1550_nand_setup(void)
 	case 0: case 2: case 8: case 0xC: case 0xD:
 		/* x16 NAND Flash */
 		pb1550_nand_pd.devwidth = 1;
-		/* fallthrough */
+		fallthrough;
 	case 1: case 3: case 9: case 0xE: case 0xF:
 		/* x8 NAND, already set up */
 		platform_device_register(&pb1550_nand_dev);

arch/mips/ar7/Platform

 #
 # Texas Instruments AR7
 #
-platform-$(CONFIG_AR7)		+= ar7/
 cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
 load-$(CONFIG_AR7)		+= 0xffffffff94100000

arch/mips/ar7/setup.c

@@ -57,7 +57,7 @@ const char *get_system_type(void)
 		case TITAN_CHIP_1060:
 			return "TI AR7 (TNETV1060)";
 		}
-		/* fall through */
+		fallthrough;
 	default:
 		return "TI AR7 (unknown)";
 	}

arch/mips/ath25/Platform

 #
 # Atheros AR531X/AR231X WiSoC
 #
-platform-$(CONFIG_ATH25)	+= ath25/
 cflags-$(CONFIG_ATH25)		+= -I$(srctree)/arch/mips/include/asm/mach-ath25
 load-$(CONFIG_ATH25)		+= 0xffffffff80041000

arch/mips/ath79/Platform

@@ -2,6 +2,5 @@
 # Atheros AR71xx/AR724x/AR913x
 #
 
-platform-$(CONFIG_ATH79)	+= ath79/
 cflags-$(CONFIG_ATH79)		+= -I$(srctree)/arch/mips/include/asm/mach-ath79
 load-$(CONFIG_ATH79)		= 0xffffffff80060000

arch/mips/ath79/setup.c

@@ -153,8 +153,7 @@ static void __init ath79_detect_sys_type(void)
 	case REV_ID_MAJOR_QCA9533_V2:
 		ver = 2;
 		ath79_soc_rev = 2;
-		/* fall through */
-
+		fallthrough;
 	case REV_ID_MAJOR_QCA9533:
 		ath79_soc = ATH79_SOC_QCA9533;
 		chip = "9533";

arch/mips/bcm47xx/Platform

 #
 # Broadcom BCM47XX boards
 #
-platform-$(CONFIG_BCM47XX)	+= bcm47xx/
 cflags-$(CONFIG_BCM47XX)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000

arch/mips/bcm63xx/Platform

 #
 # Broadcom BCM63XX boards
 #
-platform-$(CONFIG_BCM63XX)	+= bcm63xx/
 cflags-$(CONFIG_BCM63XX)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
 load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000

arch/mips/bcm63xx/cpu.c

@@ -304,7 +304,7 @@ void __init bcm63xx_cpu_init(void)
 	case CPU_BMIPS3300:
 		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
 			__cpu_name[cpu] = "Broadcom BCM6338";
-		/* fall-through */
+		fallthrough;
 	case CPU_BMIPS32:
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;

arch/mips/bcm63xx/dev-flash.c

@@ -94,7 +94,7 @@ static int __init bcm63xx_detect_flash_type(void)
 		case STRAPBUS_6368_BOOT_SEL_PARALLEL:
 			return BCM63XX_FLASH_TYPE_PARALLEL;
 		}
-		/* fall through */
+		fallthrough;
 	default:
 		return -EINVAL;
 	}

arch/mips/bmips/Platform

 #
 # Broadcom Generic BMIPS kernel
 #
-platform-$(CONFIG_BMIPS_GENERIC)	+= bmips/
 cflags-$(CONFIG_BMIPS_GENERIC)		+=				\
 		-I$(srctree)/arch/mips/include/asm/mach-bmips/
 load-$(CONFIG_BMIPS_GENERIC)		:= 0xffffffff80010000