drm/radeon: add a i2c bus mutex

The i2c and aux buses use the same pads so add
a mutex to protect access to the pads.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drivers/gpu/drm/radeon/atombios_dp.c

@@ -95,9 +95,12 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
 	int index = GetIndexIntoMasterTable(COMMAND, ProcessAuxChannelTransaction);
 	unsigned char *base;
 	int recv_bytes;
+	int r = 0;
 
 	memset(&args, 0, sizeof(args));
 
+	mutex_lock(&chan->mutex);
+
 	base = (unsigned char *)(rdev->mode_info.atom_context->scratch + 1);
 
 	radeon_atom_copy_swap(base, send, send_bytes, true);
@@ -117,19 +120,22 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
 	/* timeout */
 	if (args.v1.ucReplyStatus == 1) {
 		DRM_DEBUG_KMS("dp_aux_ch timeout\n");
-		return -ETIMEDOUT;
+		r = -ETIMEDOUT;
+		goto done;
 	}
 
 	/* flags not zero */
 	if (args.v1.ucReplyStatus == 2) {
 		DRM_DEBUG_KMS("dp_aux_ch flags not zero\n");
-		return -EBUSY;
+		r = -EBUSY;
+		goto done;
 	}
 
 	/* error */
 	if (args.v1.ucReplyStatus == 3) {
 		DRM_DEBUG_KMS("dp_aux_ch error\n");
-		return -EIO;
+		r = -EIO;
+		goto done;
 	}
 
 	recv_bytes = args.v1.ucDataOutLen;
@@ -139,7 +145,11 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
 	if (recv && recv_size)
 		radeon_atom_copy_swap(recv, base + 16, recv_bytes, false);
 
-	return recv_bytes;
+	r = recv_bytes;
+done:
+	mutex_unlock(&chan->mutex);
+
+	return r;
 }
 
 #define BARE_ADDRESS_SIZE 3

drivers/gpu/drm/radeon/atombios_i2c.c

@@ -43,15 +43,19 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
 	int index = GetIndexIntoMasterTable(COMMAND, ProcessI2cChannelTransaction);
 	unsigned char *base;
 	u16 out = cpu_to_le16(0);
+	int r = 0;
 
 	memset(&args, 0, sizeof(args));
 
+	mutex_lock(&chan->mutex);
+
 	base = (unsigned char *)rdev->mode_info.atom_context->scratch;
 
 	if (flags & HW_I2C_WRITE) {
 		if (num > ATOM_MAX_HW_I2C_WRITE) {
 			DRM_ERROR("hw i2c: tried to write too many bytes (%d vs 3)\n", num);
-			return -EINVAL;
+			r = -EINVAL;
+			goto done;
 		}
 		if (buf == NULL)
 			args.ucRegIndex = 0;
@@ -65,7 +69,8 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
 	} else {
 		if (num > ATOM_MAX_HW_I2C_READ) {
 			DRM_ERROR("hw i2c: tried to read too many bytes (%d vs 255)\n", num);
-			return -EINVAL;
+			r = -EINVAL;
+			goto done;
 		}
 		args.ucRegIndex = 0;
 		args.lpI2CDataOut = 0;
@@ -82,13 +87,17 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
 	/* error */
 	if (args.ucStatus != HW_ASSISTED_I2C_STATUS_SUCCESS) {
 		DRM_DEBUG_KMS("hw_i2c error\n");
-		return -EIO;
+		r = -EIO;
+		goto done;
 	}
 
 	if (!(flags & HW_I2C_WRITE))
 		radeon_atom_copy_swap(buf, base, num, false);
 
-	return 0;
+done:
+	mutex_unlock(&chan->mutex);
+
+	return r;
 }
 
 int radeon_atom_hw_i2c_xfer(struct i2c_adapter *i2c_adap,

drivers/gpu/drm/radeon/radeon_i2c.c

@@ -94,6 +94,8 @@ static int pre_xfer(struct i2c_adapter *i2c_adap)
 	struct radeon_i2c_bus_rec *rec = &i2c->rec;
 	uint32_t temp;
 
+	mutex_lock(&i2c->mutex);
+
 	/* RV410 appears to have a bug where the hw i2c in reset
 	 * holds the i2c port in a bad state - switch hw i2c away before
 	 * doing DDC - do this for all r200s/r300s/r400s for safety sake
@@ -170,6 +172,8 @@ static void post_xfer(struct i2c_adapter *i2c_adap)
 	temp = RREG32(rec->mask_data_reg) & ~rec->mask_data_mask;
 	WREG32(rec->mask_data_reg, temp);
 	temp = RREG32(rec->mask_data_reg);
+
+	mutex_unlock(&i2c->mutex);
 }
 
 static int get_clock(void *i2c_priv)
@@ -813,6 +817,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
 	struct radeon_i2c_bus_rec *rec = &i2c->rec;
 	int ret = 0;
 
+	mutex_lock(&i2c->mutex);
+
 	switch (rdev->family) {
 	case CHIP_R100:
 	case CHIP_RV100:
@@ -879,6 +885,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
 		break;
 	}
 
+	mutex_unlock(&i2c->mutex);
+
 	return ret;
 }
 
@@ -919,6 +927,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 	i2c->adapter.dev.parent = &dev->pdev->dev;
 	i2c->dev = dev;
 	i2c_set_adapdata(&i2c->adapter, i2c);
+	mutex_init(&i2c->mutex);
 	if (rec->mm_i2c ||
 	    (rec->hw_capable &&
 	     radeon_hw_i2c &&

drivers/gpu/drm/radeon/radeon_mode.h

@@ -191,6 +191,7 @@ struct radeon_i2c_chan {
 	struct radeon_i2c_bus_rec rec;
 	struct drm_dp_aux aux;
 	bool has_aux;
+	struct mutex mutex;
 };
 
 /* mostly for macs, but really any system without connector tables */