ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)

Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk:

  commit 8588a2b7
  ("ide: add SH-S202J to ivb_list[]")

We also later added support for more such devices in:

  commit e97564f3
  ("ide: More TSST drives with broken cable detection")

and in:

  commit 3ced5c49
  ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]")

It turns out that such devices lack cable detection altogether
(which in turn results in incorrect detection of 40-wire cables
by our current cable detection strategy) so always handle them
by trusting host-side cable detection only.

v2:
Model detection fixup from Martin.
Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-iops.c

@@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
 
 /*
  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
  * Some optical devices with the buggy firmwares have the same problem.
  */
 static const struct drive_list_entry ivb_list[] = {
@@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
 	 * - force bit13 (80c cable present) check also for !ivb devices
 	 *   (unless the slave device is pre-ATA3)
 	 */
-	if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
-	    (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+	if (id[ATA_ID_HW_CONFIG] & 0x4000)
 		return 1;
 
+	if (ivb) {
+		const char *model = (char *)&id[ATA_ID_PROD];
+
+		if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+			/*
+			 * These ATAPI devices always report 80c cable
+			 * so we have to depend on the host in this case.
+			 */
+			if (hwif->cbl == ATA_CBL_PATA80)
+				return 1;
+		} else {
+			/* Depend on the device side cable detection. */
+			if (id[ATA_ID_HW_CONFIG] & 0x2000)
+				return 1;
+		}
+	}
 no_80w:
 	if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
 		return 0;