Commit 8403e2ec authored by Marek Vasut's avatar Marek Vasut Committed by Tejun Heo

ahci: imx: Pull out the clock enable/disable calls

The same code for enabling and disabling SATA clock was found in multiple
places in the driver. Implement functions that enable/disable the SATA clock
and use them in such places instead of duplicating the code.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Reviewed-by: default avatarShawn Guo <shawn.guo@linaro.org>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Linux-IDE <linux-ide@vger.kernel.org>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent c869325a
......@@ -47,6 +47,36 @@ static int ahci_imx_hotplug;
module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
static int imx_sata_clock_enable(struct device *dev)
{
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
int ret;
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0) {
dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
return ret;
}
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
usleep_range(1000, 2000);
return 0;
}
static void imx_sata_clock_disable(struct device *dev)
{
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
clk_disable_unprepare(imxpriv->sata_ref_clk);
}
static void ahci_imx_error_handler(struct ata_port *ap)
{
u32 reg_val;
......@@ -72,10 +102,7 @@ static void ahci_imx_error_handler(struct ata_port *ap)
*/
reg_val = readl(mmio + PORT_PHY_CTL);
writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
clk_disable_unprepare(imxpriv->sata_ref_clk);
imx_sata_clock_disable(ap->dev);
imxpriv->no_device = true;
}
......@@ -97,46 +124,9 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
unsigned int reg_val;
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
imxpriv->gpr =
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (IS_ERR(imxpriv->gpr)) {
dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
return PTR_ERR(imxpriv->gpr);
}
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0) {
dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
ret = imx_sata_clock_enable(dev);
if (ret < 0)
return ret;
}
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
* is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
| IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
| IMX6Q_GPR13_SATA_SPD_MODE_MASK
| IMX6Q_GPR13_SATA_MPLL_SS_EN
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
| IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
| IMX6Q_GPR13_SATA_SPD_MODE_3P0G
| IMX6Q_GPR13_SATA_MPLL_SS_EN
| IMX6Q_GPR13_SATA_TX_ATTEN_9_16
| IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
| IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
usleep_range(100, 200);
/*
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
......@@ -164,11 +154,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
static void imx6q_sata_exit(struct device *dev)
{
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
clk_disable_unprepare(imxpriv->sata_ref_clk);
imx_sata_clock_disable(dev);
}
static int imx_ahci_suspend(struct device *dev)
......@@ -179,12 +165,8 @@ static int imx_ahci_suspend(struct device *dev)
* If no_device is set, The CLKs had been gated off in the
* initialization so don't do it again here.
*/
if (!imxpriv->no_device) {
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
clk_disable_unprepare(imxpriv->sata_ref_clk);
}
if (!imxpriv->no_device)
imx_sata_clock_disable(dev);
return 0;
}
......@@ -192,22 +174,12 @@ static int imx_ahci_suspend(struct device *dev)
static int imx_ahci_resume(struct device *dev)
{
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
int ret;
int ret = 0;
if (!imxpriv->no_device) {
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0) {
dev_err(dev, "pre-enable sata_ref clock err:%d\n", ret);
return ret;
}
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
usleep_range(1000, 2000);
}
if (!imxpriv->no_device)
ret = imx_sata_clock_enable(dev);
return 0;
return ret;
}
static struct ahci_platform_data imx6q_sata_pdata = {
......@@ -290,6 +262,41 @@ static int imx_ahci_probe(struct platform_device *pdev)
ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
ahci_dev->of_node = dev->of_node;
imxpriv->gpr =
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (IS_ERR(imxpriv->gpr)) {
dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
ret = PTR_ERR(imxpriv->gpr);
goto err_out;
}
/*
* Set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
* is 0x07ffffff, and the other one write for setting
* the mpll_clk_en happens in imx_sata_clock_enable().
*/
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK |
IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK |
IMX6Q_GPR13_SATA_SPD_MODE_MASK |
IMX6Q_GPR13_SATA_MPLL_SS_EN |
IMX6Q_GPR13_SATA_TX_ATTEN_MASK |
IMX6Q_GPR13_SATA_TX_BOOST_MASK |
IMX6Q_GPR13_SATA_TX_LVL_MASK |
IMX6Q_GPR13_SATA_MPLL_CLK_EN |
IMX6Q_GPR13_SATA_TX_EDGE_RATE,
IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB |
IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M |
IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
IMX6Q_GPR13_SATA_MPLL_SS_EN |
IMX6Q_GPR13_SATA_TX_ATTEN_9_16 |
IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB |
IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
ret = platform_device_add_resources(ahci_pdev, res, 2);
if (ret)
goto err_out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment