Merge tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into next/dt

Pull "arm: Xilinx Zynq DT fixes for v4.14" from Michal Simek:

- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x

* tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
  arm: zynq: Remove earlycon from bootargs
  arm: zynq: Use C pre-processor for includes in dts
  arm: zynq: Label whole PL part as fpga_full region
  arm: zynq: Add device-type property for zynq ethernet phy nodes
  arm: zynq: Add adv7511 on i2c bus for zc70x

arch/arm/boot/dts/zynq-7000.dtsi

@@ -42,6 +42,14 @@ cpu1: cpu@1 {
 		};
 	};
 
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&devcfg>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
 	pmu@f8891000 {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;

arch/arm/boot/dts/zynq-parallella.dts

@@ -34,7 +34,7 @@ memory@0 {
 	};
 
 	chosen {
-		bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
 		stdout-path = "serial0:115200n8";
 	};
 };
@@ -54,6 +54,7 @@ ethernet_phy: ethernet-phy@0 {
 		compatible = "ethernet-phy-id0141.0e90",
 		             "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
+		device_type = "ethernet-phy";
 		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
 		                   <0x3 0x11 0xfff0 0xa>;
 	};

arch/arm/boot/dts/zynq-zc702.dts

@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 /dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
 
 / {
 	model = "Zynq ZC702 Development Board";
@@ -30,7 +30,7 @@ memory@0 {
 	};
 
 	chosen {
-		bootargs = "earlycon";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -97,6 +97,7 @@ &gem0 {
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
+		device_type = "ethernet-phy";
 	};
 };
 
@@ -131,6 +132,21 @@ si570: clock-generator@5d {
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "right";
+			};
+		};
+
 		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/zynq-zc706.dts

@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 /dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
 
 / {
 	model = "Zynq ZC706 Development Board";
@@ -30,7 +30,7 @@ memory@0 {
 	};
 
 	chosen {
-		bootargs = "earlycon";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -53,6 +53,7 @@ &gem0 {
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
+		device_type = "ethernet-phy";
 	};
 };
 
@@ -87,6 +88,21 @@ si570: clock-generator@5d {
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "evenly";
+			};
+		};
+
 		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/zynq-zed.dts

@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 /dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
 
 / {
 	model = "Zynq Zed Development Board";
@@ -29,7 +29,7 @@ memory@0 {
 	};
 
 	chosen {
-		bootargs = "earlycon";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -50,6 +50,7 @@ &gem0 {
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
+		device_type = "ethernet-phy";
 	};
 };
 

arch/arm/boot/dts/zynq-zybo.dts

@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 /dts-v1/;
-/include/ "zynq-7000.dtsi"
+#include "zynq-7000.dtsi"
 
 / {
 	model = "Zynq ZYBO Development Board";
@@ -29,7 +29,7 @@ memory@0 {
 	};
 
 	chosen {
-		bootargs = "earlycon";
+		bootargs = "";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -51,6 +51,7 @@ &gem0 {
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
+		device_type = "ethernet-phy";
 	};
 };