mfd: Replace strict_strtoul() with kstrtoul() in ab* and att*

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/aat2870-core.c

@@ -312,8 +312,9 @@ static ssize_t aat2870_reg_write_file(struct file *file,
 	while (*start == ' ')
 		start++;
 
-	if (strict_strtoul(start, 16, &val))
-		return -EINVAL;
+	ret = kstrtoul(start, 16, &val);
+	if (ret)
+		return ret;
 
 	ret = aat2870->write(aat2870, (u8)addr, (u8)val);
 	if (ret)

drivers/mfd/ab3100-core.c

@@ -491,7 +491,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 	char buf[32];
 	ssize_t buf_size;
 	int regp;
-	unsigned long user_reg;
+	u8 user_reg;
 	int err;
 	int i = 0;
 
@@ -514,34 +514,29 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 	/*
 	 * Advance pointer to end of string then terminate
 	 * the register string. This is needed to satisfy
-	 * the strict_strtoul() function.
+	 * the kstrtou8() function.
 	 */
 	while ((i < buf_size) && (buf[i] != ' '))
 		i++;
 	buf[i] = '\0';
 
-	err = strict_strtoul(&buf[regp], 16, &user_reg);
+	err = kstrtou8(&buf[regp], 16, &user_reg);
 	if (err)
 		return err;
-	if (user_reg > 0xff)
-		return -EINVAL;
 
 	/* Either we read or we write a register here */
 	if (!priv->mode) {
 		/* Reading */
-		u8 reg = (u8) user_reg;
 		u8 regvalue;
 
-		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
+		ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
-			 reg, regvalue);
+			 user_reg, regvalue);
 	} else {
 		int valp;
-		unsigned long user_value;
-		u8 reg = (u8) user_reg;
-		u8 value;
+		u8 user_value;
 		u8 regvalue;
 
 		/*
@@ -557,20 +552,17 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 			i++;
 		buf[i] = '\0';
 
-		err = strict_strtoul(&buf[valp], 16, &user_value);
+		err = kstrtou8(&buf[valp], 16, &user_value);
 		if (err)
 			return err;
-		if (user_reg > 0xff)
-			return -EINVAL;
 
-		value = (u8) user_value;
-		ab3100_set_register_interruptible(ab3100, reg, value);
-		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
+		ab3100_set_register_interruptible(ab3100, user_reg, user_value);
+		ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug write reg[0x%02x] with 0x%02x, "
 			 "after readback: 0x%02x\n",
-			 reg, value, regvalue);
+			 user_reg, user_value, regvalue);
 	}
 	return buf_size;
 }

drivers/mfd/ab8500-debugfs.c

@@ -2757,7 +2757,7 @@ static ssize_t show_irq(struct device *dev,
 	unsigned int irq_index;
 	int err;
 
-	err = strict_strtoul(attr->attr.name, 0, &name);
+	err = kstrtoul(attr->attr.name, 0, &name);
 	if (err)
 		return err;