Commit 84629d43 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "The main change is that we are reverting blanket enablement of SMBus
  mode for devices with Elan touchpads that report BIOS release date as
  2018+ because there are older boxes with updated BIOSes that still do
  not work well in SMbus mode.

  We will have to establish whitelist for SMBus mode it looks like"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: elantech - enable SMBus on new (2018+) systems"
  Input: synaptics-rmi4 - avoid processing unknown IRQs
  Input: soc_button_array - partial revert of support for newer surface devices
  Input: goodix - add support for 9-bytes reports
  Input: da9063 - fix capability and drop KEY_SLEEP
parents 283ea345 c324345c
......@@ -232,10 +232,7 @@ static int da9063_onkey_probe(struct platform_device *pdev)
onkey->input->phys = onkey->phys;
onkey->input->dev.parent = &pdev->dev;
if (onkey->key_power)
input_set_capability(onkey->input, EV_KEY, KEY_POWER);
input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
input_set_capability(onkey->input, EV_KEY, KEY_POWER);
INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
......
......@@ -92,11 +92,18 @@ soc_button_device_create(struct platform_device *pdev,
continue;
gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index);
if (gpio < 0 && gpio != -ENOENT) {
error = gpio;
goto err_free_mem;
} else if (!gpio_is_valid(gpio)) {
/* Skip GPIO if not present */
if (!gpio_is_valid(gpio)) {
/*
* Skip GPIO if not present. Note we deliberately
* ignore -EPROBE_DEFER errors here. On some devices
* Intel is using so called virtual GPIOs which are not
* GPIOs at all but some way for AML code to check some
* random status bits without need a custom opregion.
* In some cases the resources table we parse points to
* such a virtual GPIO, since these are not real GPIOs
* we do not have a driver for these so they will never
* show up, therefore we ignore -EPROBE_DEFER.
*/
continue;
}
......
......@@ -1827,31 +1827,6 @@ static int elantech_create_smbus(struct psmouse *psmouse,
leave_breadcrumbs);
}
static bool elantech_use_host_notify(struct psmouse *psmouse,
struct elantech_device_info *info)
{
if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
return true;
switch (info->bus) {
case ETP_BUS_PS2_ONLY:
/* expected case */
break;
case ETP_BUS_SMB_HST_NTFY_ONLY:
case ETP_BUS_PS2_SMB_HST_NTFY:
/* SMbus implementation is stable since 2018 */
if (dmi_get_bios_year() >= 2018)
return true;
/* fall through */
default:
psmouse_dbg(psmouse,
"Ignoring SMBus bus provider %d\n", info->bus);
break;
}
return false;
}
/**
* elantech_setup_smbus - called once the PS/2 devices are enumerated
* and decides to instantiate a SMBus InterTouch device.
......@@ -1871,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse,
* i2c_blacklist_pnp_ids.
* Old ICs are up to the user to decide.
*/
if (!elantech_use_host_notify(psmouse, info) ||
if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
return -ENXIO;
}
......@@ -1891,6 +1866,34 @@ static int elantech_setup_smbus(struct psmouse *psmouse,
return 0;
}
static bool elantech_use_host_notify(struct psmouse *psmouse,
struct elantech_device_info *info)
{
if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
return true;
switch (info->bus) {
case ETP_BUS_PS2_ONLY:
/* expected case */
break;
case ETP_BUS_SMB_ALERT_ONLY:
/* fall-through */
case ETP_BUS_PS2_SMB_ALERT:
psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
break;
case ETP_BUS_SMB_HST_NTFY_ONLY:
/* fall-through */
case ETP_BUS_PS2_SMB_HST_NTFY:
return true;
default:
psmouse_dbg(psmouse,
"Ignoring SMBus bus provider %d.\n",
info->bus);
}
return false;
}
int elantech_init_smbus(struct psmouse *psmouse)
{
struct elantech_device_info info;
......
......@@ -146,7 +146,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
}
mutex_lock(&data->irq_mutex);
bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
data->irq_count);
/*
* At this point, irq_status has all bits that are set in the
......@@ -385,6 +385,8 @@ static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
bitmap_copy(data->current_irq_mask, data->new_irq_mask,
data->num_of_irq_regs);
bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
error_unlock:
mutex_unlock(&data->irq_mutex);
return error;
......@@ -398,6 +400,8 @@ static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
struct device *dev = &rmi_dev->dev;
mutex_lock(&data->irq_mutex);
bitmap_andnot(data->fn_irq_bits,
data->fn_irq_bits, mask, data->irq_count);
bitmap_andnot(data->new_irq_mask,
data->current_irq_mask, mask, data->irq_count);
......
......@@ -53,6 +53,7 @@ struct goodix_ts_data {
const char *cfg_name;
struct completion firmware_loading_complete;
unsigned long irq_flags;
unsigned int contact_size;
};
#define GOODIX_GPIO_INT_NAME "irq"
......@@ -62,6 +63,7 @@ struct goodix_ts_data {
#define GOODIX_MAX_WIDTH 4096
#define GOODIX_INT_TRIGGER 1
#define GOODIX_CONTACT_SIZE 8
#define GOODIX_MAX_CONTACT_SIZE 9
#define GOODIX_MAX_CONTACTS 10
#define GOODIX_CONFIG_MAX_LENGTH 240
......@@ -144,6 +146,19 @@ static const struct dmi_system_id rotated_screen[] = {
{}
};
static const struct dmi_system_id nine_bytes_report[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
.ident = "Lenovo YogaBook",
/* YB1-X91L/F and YB1-X90L/F */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9")
}
},
#endif
{}
};
/**
* goodix_i2c_read - read data from a register of the i2c slave device.
*
......@@ -249,7 +264,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
do {
error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
data, GOODIX_CONTACT_SIZE + 1);
data, ts->contact_size + 1);
if (error) {
dev_err(&ts->client->dev, "I2C transfer error: %d\n",
error);
......@@ -262,12 +277,12 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
return -EPROTO;
if (touch_num > 1) {
data += 1 + GOODIX_CONTACT_SIZE;
data += 1 + ts->contact_size;
error = goodix_i2c_read(ts->client,
GOODIX_READ_COOR_ADDR +
1 + GOODIX_CONTACT_SIZE,
1 + ts->contact_size,
data,
GOODIX_CONTACT_SIZE *
ts->contact_size *
(touch_num - 1));
if (error)
return error;
......@@ -286,7 +301,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
return 0;
}
static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data)
{
int id = coor_data[0] & 0x0F;
int input_x = get_unaligned_le16(&coor_data[1]);
......@@ -301,6 +316,21 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
}
static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
{
int id = coor_data[1] & 0x0F;
int input_x = get_unaligned_le16(&coor_data[3]);
int input_y = get_unaligned_le16(&coor_data[5]);
int input_w = get_unaligned_le16(&coor_data[7]);
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
touchscreen_report_pos(ts->input_dev, &ts->prop,
input_x, input_y, true);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
}
/**
* goodix_process_events - Process incoming events
*
......@@ -311,7 +341,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
*/
static void goodix_process_events(struct goodix_ts_data *ts)
{
u8 point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
u8 point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
int touch_num;
int i;
......@@ -326,8 +356,12 @@ static void goodix_process_events(struct goodix_ts_data *ts)
input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
for (i = 0; i < touch_num; i++)
goodix_ts_report_touch(ts,
&point_data[1 + GOODIX_CONTACT_SIZE * i]);
if (ts->contact_size == 9)
goodix_ts_report_touch_9b(ts,
&point_data[1 + ts->contact_size * i]);
else
goodix_ts_report_touch_8b(ts,
&point_data[1 + ts->contact_size * i]);
input_mt_sync_frame(ts->input_dev);
input_sync(ts->input_dev);
......@@ -730,6 +764,13 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
"Applying '180 degrees rotated screen' quirk\n");
}
if (dmi_check_system(nine_bytes_report)) {
ts->contact_size = 9;
dev_dbg(&ts->client->dev,
"Non-standard 9-bytes report format quirk\n");
}
error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
......@@ -810,6 +851,7 @@ static int goodix_ts_probe(struct i2c_client *client,
ts->client = client;
i2c_set_clientdata(client, ts);
init_completion(&ts->firmware_loading_complete);
ts->contact_size = GOODIX_CONTACT_SIZE;
error = goodix_get_gpio_config(ts);
if (error)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment