Commit 846990e0 authored by Marc Kleine-Budde's avatar Marc Kleine-Budde

can: mcp251xfd: add RX IRQ coalescing ethtool support

This patch adds support ethtool based configuration for the RX IRQ
coalescing added in the previous patch.

Link: https://lore.kernel.org/20220313083640.501791-10-mkl@pengutronix.deSigned-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 60a848c5
...@@ -46,14 +46,69 @@ mcp251xfd_ring_set_ringparam(struct net_device *ndev, ...@@ -46,14 +46,69 @@ mcp251xfd_ring_set_ringparam(struct net_device *ndev,
return -EBUSY; return -EBUSY;
priv->rx_obj_num = layout.cur_rx; priv->rx_obj_num = layout.cur_rx;
priv->rx_obj_num_coalesce_irq = layout.rx_coalesce;
priv->tx->obj_num = layout.cur_tx;
return 0;
}
static int mcp251xfd_ring_get_coalesce(struct net_device *ndev,
struct ethtool_coalesce *ec,
struct kernel_ethtool_coalesce *kec,
struct netlink_ext_ack *ext_ack)
{
struct mcp251xfd_priv *priv = netdev_priv(ndev);
u32 rx_max_frames;
/* The ethtool doc says:
* To disable coalescing, set usecs = 0 and max_frames = 1.
*/
if (priv->rx_obj_num_coalesce_irq == 0)
rx_max_frames = 1;
else
rx_max_frames = priv->rx_obj_num_coalesce_irq;
ec->rx_max_coalesced_frames_irq = rx_max_frames;
ec->rx_coalesce_usecs_irq = priv->rx_coalesce_usecs_irq;
return 0;
}
static int mcp251xfd_ring_set_coalesce(struct net_device *ndev,
struct ethtool_coalesce *ec,
struct kernel_ethtool_coalesce *kec,
struct netlink_ext_ack *ext_ack)
{
struct mcp251xfd_priv *priv = netdev_priv(ndev);
const bool fd_mode = mcp251xfd_is_fd_mode(priv);
const struct ethtool_ringparam ring = {
.rx_pending = priv->rx_obj_num,
.tx_pending = priv->tx->obj_num,
};
struct can_ram_layout layout;
can_ram_get_layout(&layout, &mcp251xfd_ram_config, &ring, ec, fd_mode);
if ((layout.rx_coalesce != priv->rx_obj_num_coalesce_irq ||
ec->rx_coalesce_usecs_irq != priv->rx_coalesce_usecs_irq) &&
netif_running(ndev))
return -EBUSY;
priv->rx_obj_num = layout.cur_rx;
priv->rx_obj_num_coalesce_irq = layout.rx_coalesce;
priv->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
priv->tx->obj_num = layout.cur_tx; priv->tx->obj_num = layout.cur_tx;
return 0; return 0;
} }
static const struct ethtool_ops mcp251xfd_ethtool_ops = { static const struct ethtool_ops mcp251xfd_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
.get_ringparam = mcp251xfd_ring_get_ringparam, .get_ringparam = mcp251xfd_ring_get_ringparam,
.set_ringparam = mcp251xfd_ring_set_ringparam, .set_ringparam = mcp251xfd_ring_set_ringparam,
.get_coalesce = mcp251xfd_ring_get_coalesce,
.set_coalesce = mcp251xfd_ring_set_coalesce,
}; };
void mcp251xfd_ethtool_init(struct mcp251xfd_priv *priv) void mcp251xfd_ethtool_init(struct mcp251xfd_priv *priv)
......
...@@ -374,6 +374,7 @@ const struct can_ram_config mcp251xfd_ram_config = { ...@@ -374,6 +374,7 @@ const struct can_ram_config mcp251xfd_ram_config = {
.def[CAN_RAM_MODE_CANFD] = CAN_RAM_NUM_MAX, .def[CAN_RAM_MODE_CANFD] = CAN_RAM_NUM_MAX,
.fifo_num = MCP251XFD_FIFO_RX_NUM, .fifo_num = MCP251XFD_FIFO_RX_NUM,
.fifo_depth_min = MCP251XFD_RX_FIFO_DEPTH_MIN, .fifo_depth_min = MCP251XFD_RX_FIFO_DEPTH_MIN,
.fifo_depth_coalesce_min = MCP251XFD_RX_FIFO_DEPTH_COALESCE_MIN,
}, },
.tx = { .tx = {
.size[CAN_RAM_MODE_CAN] = sizeof(struct mcp251xfd_hw_tef_obj) + .size[CAN_RAM_MODE_CAN] = sizeof(struct mcp251xfd_hw_tef_obj) +
......
...@@ -406,6 +406,7 @@ static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC < ...@@ -406,6 +406,7 @@ static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC <
#define MCP251XFD_RX_OBJ_NUM_MIN 16U #define MCP251XFD_RX_OBJ_NUM_MIN 16U
#define MCP251XFD_RX_OBJ_NUM_MAX (MCP251XFD_FIFO_RX_NUM * MCP251XFD_FIFO_DEPTH) #define MCP251XFD_RX_OBJ_NUM_MAX (MCP251XFD_FIFO_RX_NUM * MCP251XFD_FIFO_DEPTH)
#define MCP251XFD_RX_FIFO_DEPTH_MIN 4U #define MCP251XFD_RX_FIFO_DEPTH_MIN 4U
#define MCP251XFD_RX_FIFO_DEPTH_COALESCE_MIN 8U
#define MCP251XFD_TX_OBJ_NUM_MIN 2U #define MCP251XFD_TX_OBJ_NUM_MIN 2U
#define MCP251XFD_TX_OBJ_NUM_MAX 8U #define MCP251XFD_TX_OBJ_NUM_MAX 8U
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment