Merge tag 'omap-for-v5.18/fixes-take2' of...

Merge tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps

Few regression fixes for omap variants. These mostly fix issues related to
warnings added for system suspend, and some devicetree issues:

- Make ti-sysc driver quirks for gpt12 timer omap3 specific to fix
  timer clock disabling for am335x system suspend

- Fix new system suspend warning for dra7 vpe caused by trying to
  use register bits not wired for vpe

- Fix mmc boot order for omap3-gta04 that has no mmc2 or 3 wired

- Add missing touchscreen properties for am3

- Fix pin muxing for logicpd-som-lv and am3517-evm to not depend on
  earlier bootloader versions

- Fix refcount leak for omap_gic_of_init

* tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
  ARM: dts: am3517-evm: Fix misc pinmuxing
  ARM: dts: am33xx-l4: Add missing touchscreen clock properties
  ARM: dts: Fix mmc order for omap3-gta04
  ARM: dts: dra7: Fix suspend warning for vpe powerdomain
  bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
  ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
  iommu/omap: Fix regression in probe for NULL pointer dereference

Link: https://lore.kernel.org/r/pull-1650543308-836725@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -263,6 +263,8 @@ tscadc: tscadc@0 {
 				compatible = "ti,am3359-tscadc";
 				reg = <0x0 0x1000>;
 				interrupts = <16>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
 				status = "disabled";
 				dmas = <&edma 53 0>, <&edma 57 0>;
 				dma-names = "fifo0", "fifo1";

arch/arm/boot/dts/am3517-evm.dts

@@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@ dpi_out: endpoint {
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@ tca6416: gpio@21 {
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@ &mmc3 {
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@ &usbhsehci {
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <

arch/arm/boot/dts/am3517-som.dtsi

@@ -69,6 +69,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@ bluetooth {
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */

arch/arm/boot/dts/dra7-l4.dtsi

@@ -4188,11 +4188,11 @@ target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;

arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts

@@ -11,3 +11,18 @@ / {
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

@@ -11,3 +11,18 @@ / {
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -31,6 +31,8 @@ chosen {
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {

arch/arm/mach-omap2/omap4-common.c

@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:

drivers/bus/ti-sysc.c

@@ -3232,13 +3232,27 @@ static int sysc_check_disabled_devices(struct sysc *ddata)
  */
 static int sysc_check_active_timer(struct sysc *ddata)
 {
+	int error;
+
 	if (ddata->cap->type != TI_SYSC_OMAP2_TIMER &&
 	    ddata->cap->type != TI_SYSC_OMAP4_TIMER)
 		return 0;
 
+	/*
+	 * Quirk for omap3 beagleboard revision A to B4 to use gpt12.
+	 * Revision C and later are fixed with commit 23885389dbbb ("ARM:
+	 * dts: Fix timer regression for beagleboard revision c"). This all
+	 * can be dropped if we stop supporting old beagleboard revisions
+	 * A to B4 at some point.
+	 */
+	if (sysc_soc->soc == SOC_3430)
+		error = -ENXIO;
+	else
+		error = -EBUSY;
+
 	if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
 	    (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
-		return -ENXIO;
+		return error;
 
 	return 0;
 }

drivers/iommu/omap-iommu.c

@@ -1661,7 +1661,7 @@ static struct iommu_device *omap_iommu_probe_device(struct device *dev)
 	num_iommus = of_property_count_elems_of_size(dev->of_node, "iommus",
 						     sizeof(phandle));
 	if (num_iommus < 0)
-		return 0;
+		return ERR_PTR(-ENODEV);
 
 	arch_data = kcalloc(num_iommus + 1, sizeof(*arch_data), GFP_KERNEL);
 	if (!arch_data)