Staging: rt3070: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt3070/2870_main_dev.c

@@ -46,12 +46,10 @@
 // Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. ***
 MODULE_AUTHOR("Paul Lin <paul_lin@ralinktech.com>");
 MODULE_DESCRIPTION("RT2870 Wireless Lan Linux Driver");
-#ifdef CONFIG_STA_SUPPORT
 MODULE_LICENSE("GPL");
 #ifdef MODULE_VERSION
 MODULE_VERSION(STA_DRIVER_VERSION);
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 /* Kernel thread and vars, which handles packets that are completed. Only
  * packets that have a "complete" function are sent here. This way, the
@@ -614,7 +612,6 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 	}
 
 //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		idx = 0;
@@ -630,7 +627,6 @@ VOID RT2870_WatchDog(IN RTMP_ADAPTER *pAd)
 			RTMP_IO_WRITE32(pAd, PBF_CFG, 0xf40006);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pAd->watchDogRxOverFlowCnt >= 2)
 	{
@@ -1318,13 +1314,10 @@ VOID RT2870_BssBeaconStop(
 	{
 		INT NumOfBcn;
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			NumOfBcn = MAX_MESH_NUM;
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
 
@@ -1357,22 +1350,16 @@ VOID RT2870_BssBeaconStart(
 	{
 		INT NumOfBcn;
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			NumOfBcn = MAX_MESH_NUM;
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		for(apidx=0; apidx<NumOfBcn; apidx++)
 		{
 			UCHAR CapabilityInfoLocationInBeacon = 0;
 			UCHAR TimIELocationInBeacon = 0;
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
 			NdisZeroMemory(pBeaconSync->BeaconBuf[apidx], HW_BEACON_OFFSET);
 			pBeaconSync->CapabilityInfoLocationInBeacon[apidx] = CapabilityInfoLocationInBeacon;
 			pBeaconSync->TimIELocationInBeacon[apidx] = TimIELocationInBeacon;

drivers/staging/rt3070/Makefile

@@ -3,7 +3,6 @@ obj-$(CONFIG_RT3070)	+= rt3070sta.o
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
 EXTRA_CFLAGS += -DRT2870 -DRT30xx -DRT3070
-EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
 EXTRA_CFLAGS += -DDBG
 EXTRA_CFLAGS += -DDOT11_N_SUPPORT
 EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT

drivers/staging/rt3070/common/2870_rtmp_init.c

@@ -234,10 +234,8 @@ NDIS_STATUS	NICInitTransmit(
 		//
 		// TX_RING_SIZE, 4 ACs
 		//
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
 		{
 #if 1 //def DOT11_N_SUPPORT
 			PHT_TX_CONTEXT	pHTTXContext = &(pAd->TxContext[acidx]);
@@ -436,10 +434,8 @@ NDIS_STATUS	NICInitTransmit(
 	}
 
 out1:
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
 	{
 		PHT_TX_CONTEXT pTxContext = &(pAd->TxContext[acidx]);
 		if (pTxContext)
@@ -646,10 +642,8 @@ VOID	RTMPFreeTxRxRingMemory(
 
 
 	// Free Tx frame resource
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		for(acidx=0; acidx<4; acidx++)
-#endif // CONFIG_STA_SUPPORT //
 		{
 		PHT_TX_CONTEXT pHTTXContext = &(pAd->TxContext[acidx]);
 			if (pHTTXContext)
@@ -810,8 +804,6 @@ NDIS_STATUS	 CreateThreads(
 	return NDIS_STATUS_SUCCESS;
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 ========================================================================
 Routine Description:
@@ -992,7 +984,6 @@ VOID	RTMPAddBSSIDCipher(
 		DBGPRINT_RAW(RT_DEBUG_TRACE,(" %x:", pKey->KeyMaterial[i]));
 	DBGPRINT(RT_DEBUG_TRACE,("	 \n"));
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 ========================================================================

drivers/staging/rt3070/common/action.c

@@ -128,7 +128,6 @@ VOID MlmeADDBAAction(
 			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -137,7 +136,6 @@ VOID MlmeADDBAAction(
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
 
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = ADDBA_REQ;
@@ -214,10 +212,8 @@ VOID MlmeDELBAAction(
 		// SEND BAR (Send BAR to refresh peer reordering buffer.)
 		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
 		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
@@ -235,7 +231,7 @@ VOID MlmeDELBAAction(
 
 		// SEND DELBA FRAME
 		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -243,7 +239,7 @@ VOID MlmeDELBAAction(
 			else
 				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
 		}
-#endif // CONFIG_STA_SUPPORT //
+
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = DELBA;
 		Frame.DelbaParm.Initiator = pInfo->Initiator;
@@ -370,7 +366,6 @@ static VOID respond_ht_information_exchange_action(
 
 	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -378,7 +373,6 @@ static VOID respond_ht_information_exchange_action(
 		else
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	HTINFOframe.Category = CATEGORY_HT;
 	HTINFOframe.Action = HT_INFO_EXCHANGE;
@@ -407,7 +401,7 @@ VOID PeerHTAction(
 	{
 		case NOTIFY_BW_ACTION:
 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
+
 			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
 			{
 				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
@@ -417,7 +411,6 @@ VOID PeerHTAction(
 								Elem->Msg[LENGTH_802_11+2] ));
 				break;
 			}
-#endif // CONFIG_STA_SUPPORT //
 
 			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
 				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
@@ -546,11 +539,8 @@ VOID SendRefreshBAR(
 
 			Sequence = pEntry->TxSeq[TID];
 
-
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
 			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.

drivers/staging/rt3070/common/ba_action.c

@@ -133,10 +133,8 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
 		// pass this 802.3 packet to upper layer or forward this packet to WM directly
 		//
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -603,11 +601,8 @@ VOID BAOriSessionAdd(
 			return;
 		}
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
 		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
@@ -1072,14 +1067,12 @@ VOID BAOriSessionSetupTimeout(
 
 	pAd = pBAEntry->pAdapter;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
@@ -1218,8 +1211,8 @@ VOID PeerAddBAReqAction(
 	}
 
 	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
+
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -1227,7 +1220,7 @@ VOID PeerAddBAReqAction(
 		else
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	ADDframe.Category = CATEGORY_BA;
 	ADDframe.Action = ADDBA_RESP;
 	ADDframe.Token = pAddreqFrame->Token;
@@ -1294,9 +1287,7 @@ VOID PeerAddBARspAction(
 		}
 		// Rcv Decline StatusCode
 		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
             || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
             )
 		{
 			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
@@ -1421,10 +1412,9 @@ VOID SendPSMPAction(
 		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
 		return;
 	}
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
 
 	Frame.Category = CATEGORY_HT;
 	Frame.Action = SMPS_ACTION;
@@ -1531,10 +1521,8 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	ASSERT(pRxBlk->pRxPacket);
 	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
@@ -1549,15 +1537,12 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	//
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef LINUX
 			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 

drivers/staging/rt3070/common/cmm_data.c

@@ -377,14 +377,12 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// outgoing frame always wakeup PHY to prevent frame lost
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 			AsicForceWakeup(pAd, TRUE);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
@@ -408,7 +406,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
@@ -424,7 +421,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
@@ -434,7 +430,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
 	{
@@ -444,18 +440,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		else
 			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
 	{
-#ifdef CONFIG_STA_SUPPORT
 		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
 		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
 		{
 			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		bAckRequired = FALSE;
 	}
 	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
@@ -725,8 +718,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
 
 		{
-
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 
@@ -738,7 +729,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 //				if (pAd->StaCfg.bAutoTxRateSwitch)
 //					TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
@@ -821,13 +811,10 @@ BOOLEAN CanDoAggregateTransmit(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
 		return TRUE;
 	else
-#endif // CONFIG_STA_SUPPORT //
 		return FALSE;
-
 }
 
 
@@ -881,10 +868,8 @@ VOID RTMPDeQueuePacket(
 	{
 		sQIdx = 0;
 //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		eQIdx = 3;	// 4 ACs, start from 0.
-#endif // CONFIG_STA_SUPPORT //
 	}
 	else
 	{
@@ -1004,10 +989,8 @@ VOID RTMPDeQueuePacket(
 			Count += pTxBlk->TxPacketList.Number;
 
 				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 		RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
@@ -1693,7 +1676,6 @@ UINT deaggregate_AMSDU_announce(
 		// convert to 802.3 header
         CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
 		{
 		    // avoid local heap overflow, use dyanamic allocation
@@ -1703,9 +1685,7 @@ UINT deaggregate_AMSDU_announce(
 		   WpaEAPOLKeyAction(pAd, Elem);
 		   kfree(Elem);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        	if (pRemovedLLCSNAP)
@@ -1715,15 +1695,12 @@ UINT deaggregate_AMSDU_announce(
 	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
 	        	}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
 		if (pClonePacket)
 		{
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 
@@ -1821,11 +1798,11 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 		return NULL;
 
 	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 	if (pAd->StaCfg.BssType == BSS_INFRA)
 		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
 
 	// allocate one MAC entry
 	NdisAcquireSpinLock(&pAd->MacTabLock);
@@ -1848,8 +1825,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
 			}
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->ValidAsCLI = TRUE;
@@ -1858,7 +1833,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 					pEntry->ValidAsMesh = FALSE;
 					pEntry->ValidAsDls = FALSE;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->bIAmBadAtheros = FALSE;
@@ -1879,15 +1853,12 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->apidx = apidx;
 
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->AuthMode = pAd->StaCfg.AuthMode;
 					pEntry->WepStatus = pAd->StaCfg.WepStatus;
 					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->GTKState = REKEY_NEGOTIATING;
@@ -2376,10 +2347,8 @@ VOID Indicate_Legacy_Packet(
 	// 2. remove LLC
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
 	{
@@ -2430,11 +2399,8 @@ VOID Indicate_Legacy_Packet(
 	//
 	// pass this 802.3 packet to upper layer or forward this packet to WM directly
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -2497,11 +2463,8 @@ VOID CmmRxRalinkFrameIndicate(
 	}
 
 	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
 
 	ASSERT(pRxBlk->pRxPacket);
 
@@ -2511,10 +2474,9 @@ VOID CmmRxRalinkFrameIndicate(
 	Payload2Size = Msdu2Size - LENGTH_802_3;
 
 	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (!pPacket2)
 	{
@@ -2527,17 +2489,13 @@ VOID CmmRxRalinkFrameIndicate(
 	pRxBlk->DataSize = Payload1Size;
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pPacket2)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -2680,15 +2638,12 @@ VOID Indicate_EAPOL_Packet(
 {
 	MAC_TABLE_ENTRY *pEntry = NULL;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pEntry = &pAd->MacTab.Content[BSSID_WCID];
 		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
 		return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pEntry == NULL)
 	{

drivers/staging/rt3070/common/cmm_data_2870.c

@@ -293,10 +293,8 @@ USHORT RtmpUSB_WriteSingleTxResource(
 
 		// For TxInfo, the length of USBDMApktLen = TXWI_SIZE + 802.11 header + payload
 		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(USBDMApktLen), FALSE, FIFO_EDCA, FALSE /*NextValid*/,  FALSE);
-#endif // CONFIG_STA_SUPPORT //
 
 		if ((pHTTXContext->CurWritePosition + 3906 + pTxBlk->Priv) > MAX_TXBULK_LIMIT)
 		{
@@ -696,7 +694,6 @@ VOID RtmpUSBNullFrameKickOut(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -842,7 +839,6 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RT28xxUsbMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd)
@@ -852,13 +848,12 @@ VOID RT28xxUsbMlmeRadioOn(
 	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
 		return;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
     	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
 		RTMPusecDelay(10000);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	NICResetFromError(pAd);
 
 	// Enable Tx/Rx
@@ -874,10 +869,8 @@ VOID RT28xxUsbMlmeRadioOn(
 	// Clear Radio off flag
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTUSBBulkReceive(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_ON);
@@ -899,7 +892,6 @@ VOID RT28xxUsbMlmeRadioOFF(
 	// Set Radio off flag
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Link down first if any association exists
@@ -911,8 +903,6 @@ VOID RT28xxUsbMlmeRadioOFF(
 		// Clean up old bss table
 		BssTableInit(&pAd->ScanTab);
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
 	{
@@ -956,9 +946,7 @@ VOID RT28xxUsbMlmeRadioOFF(
 	// TX_PIN_CFG => value = 0x0 => 20mA
 	//RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // CONFIG_STA_SUPPORT //
 }
 

drivers/staging/rt3070/common/cmm_sanity.c

@@ -284,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT PQOS_CAPABILITY_PARM pQosCapability,
     OUT ULONG *pRalinkIe,
     OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
     OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
     OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -295,9 +293,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
 {
     CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
 	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
     PFRAME_802_11		pFrame;
     PEID_STRUCT         pEid;
     UCHAR				SubType;
@@ -325,10 +321,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
     *LengthVIE = 0;					// Set the length of VIE to init value 0
     *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
     *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
     *pRalinkIe = 0;
     *pNewChannel = 0;
@@ -439,7 +433,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
 				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
@@ -448,7 +441,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 					*LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -469,14 +461,12 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
 				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 			                Ptr = (PUCHAR) pVIE;
 			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 			                *LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -503,7 +493,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 if(pEid->Len == 1)
                 {
                     *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
+
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if (ChannelSanity(pAd, *pChannel) == 0)
@@ -512,7 +502,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 							return FALSE;
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
                     Sanity |= 0x4;
                 }
                 else
@@ -550,14 +540,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 }
                 break;
 
-#ifdef CONFIG_STA_SUPPORT
             case IE_TIM:
                 if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
                 {
                     GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
                 }
                 break;
-#endif // CONFIG_STA_SUPPORT //
+
             case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
                 if(pEid->Len == 3)
                 {
@@ -599,7 +588,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
         			else
         				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
                 }
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
 
@@ -620,7 +608,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     }
                 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
                 else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
                 {
                     // Copy to pVIE which will report to microsoft bssid list.
@@ -687,8 +674,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     pEdcaParm->Cwmax[QID_AC_VO] = CW_MAX_IN_BITS-1;
                     pEdcaParm->Txop[QID_AC_VO]  = 48;   // AC_VO: 48*32us ~= 1.5ms
                 }
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
                 else
                 {
                 }
@@ -759,7 +744,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     }
 
     // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		UCHAR LatchRfChannel = MsgChannel;
@@ -772,7 +756,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 			Sanity |= 0x4;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (Sanity != 0x7)
 	{
@@ -813,10 +796,8 @@ BOOLEAN MlmeScanReqSanity(
 
 	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
 		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
 		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
 		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
 		))
 	{
 		return TRUE;

drivers/staging/rt3070/common/cmm_sync.c

@@ -383,27 +383,21 @@ VOID ScanNextChannel(
 	NDIS_STATUS     NStatus;
 	ULONG           FrameLen = 0;
 	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
 	USHORT          Status;
 	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
 			&& (INFRA_ON(pAd)
 				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
 			)
 		{
 			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
@@ -421,7 +415,6 @@ VOID ScanNextChannel(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//
@@ -452,23 +445,18 @@ VOID ScanNextChannel(
 			Status = MLME_SUCCESS;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
 
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 	}
 #ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
 	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
 	{
 		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
 	}
-#endif // CONFIG_STA_SUPPORT //
 #endif // RT2870 //
 	else
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
@@ -479,12 +467,10 @@ VOID ScanNextChannel(
 			if (pAd->StaCfg.Psm == PWR_SAVE)
 				MlmeSetPsmBit(pAd, PWR_ACTIVE);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
 		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->MlmeAux.Channel > 14)
@@ -496,7 +482,6 @@ VOID ScanNextChannel(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
 		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
@@ -508,7 +493,6 @@ VOID ScanNextChannel(
 		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
 		if (ScanType == FAST_SCAN_ACTIVE)
 			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
 		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
 				(ScanType == SCAN_CISCO_PASSIVE) ||
 				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
@@ -519,7 +503,6 @@ VOID ScanNextChannel(
 			else
 				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
 		}
-#endif // CONFIG_STA_SUPPORT //
 		else // must be SCAN_PASSIVE or SCAN_ACTIVE
 		{
 			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
@@ -544,14 +527,13 @@ VOID ScanNextChannel(
 			if (NStatus != NDIS_STATUS_SUCCESS)
 			{
 				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
+
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 					Status = MLME_FAIL_NO_RESOURCE;
 					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 				}
-#endif // CONFIG_STA_SUPPORT //
 
 				return;
 			}
@@ -624,11 +606,8 @@ VOID ScanNextChannel(
 
 		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
 	}
 }
 

drivers/staging/rt3070/common/cmm_wpa.c

@@ -589,7 +589,6 @@ VOID RTMPMakeRSNIE(
 	rsnielen_ex_cur_p = NULL;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef WPA_SUPPLICANT_SUPPORT
@@ -622,7 +621,6 @@ VOID RTMPMakeRSNIE(
 
 			bMixCipher = pAd->StaCfg.bMixCipher;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// indicate primary RSNIE as WPA or WPA2
@@ -1093,11 +1091,6 @@ BOOLEAN RTMPParseEapolKeyData(
         return FALSE;
     }
 
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
 	return TRUE;
 
 }

drivers/staging/rt3070/common/rtmp_init.c

@@ -179,12 +179,9 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{TX_TIMEOUT_CFG,	0x000a2090},
 	{MAX_LEN_CFG,		MAX_AGGREGATION_SIZE | 0x00001000},	// 0x3018, MAX frame length. Max PSDU = 16kbytes.
 	{LED_CFG,		0x7f031e46}, // Gary, 2006-08-23
-
-//#ifdef CONFIG_STA_SUPPORT
 //	{WMM_AIFSN_CFG,		0x00002273},
 //	{WMM_CWMIN_CFG,		0x00002344},
 //	{WMM_CWMAX_CFG,		0x000034aa},
-//#endif // CONFIG_STA_SUPPORT //
 	{PBF_MAX_PCNT,			0x1F3FBF9F}, 	//0x1F3f7f9f},		//Jan, 2006/04/20
 	//{TX_RTY_CFG,			0x6bb80408},	// Jan, 2006/11/16
 	{TX_RTY_CFG,			0x47d01f0f},	// Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03
@@ -193,9 +190,7 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	// Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
 //PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
 #ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
 	{PBF_CFG, 				0xf40006}, 		// Only enable Queue 2
-#endif // CONFIG_STA_SUPPORT //
 	{MM40_PROT_CFG,			0x3F44084},		// Initial Auto_Responder, because QA will turn off Auto-Responder
 	{WPDMA_GLO_CFG,			0x00000030},
 #endif // RT2870 //
@@ -219,19 +214,14 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
 };
 
-
-#ifdef CONFIG_STA_SUPPORT
 RTMP_REG_PAIR	STAMACRegTable[] =	{
 	{WMM_AIFSN_CFG,		0x00002273},
 	{WMM_CWMIN_CFG,	0x00002344},
 	{WMM_CWMAX_CFG,	0x000034aa},
 };
-#endif // CONFIG_STA_SUPPORT //
 
 #define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
 #define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef RT2870
 //
@@ -1558,9 +1548,6 @@ VOID	NICReadEEPROMParameters(
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if ((NicConfig2.word & 0x00ff) == 0xff)
@@ -1573,7 +1560,6 @@ VOID	NICReadEEPROMParameters(
 			NicConfig2.word &= 0x00ff;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (NicConfig2.field.DynamicTxAgcControl == 1)
 		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
@@ -1792,10 +1778,8 @@ VOID	NICReadEEPROMParameters(
 VOID	NICInitAsicFromEEPROM(
 	IN	PRTMP_ADAPTER	pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
 	UINT32					data = 0;
 	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
 	USHORT					i;
 	EEPROM_ANTENNA_STRUC	Antenna;
 	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
@@ -1830,8 +1814,6 @@ VOID	NICInitAsicFromEEPROM(
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if ((NicConfig2.word & 0x00ff) == 0xff)
@@ -1844,7 +1826,6 @@ VOID	NICInitAsicFromEEPROM(
 			NicConfig2.word &= 0x00ff;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Save the antenna for future use
 	pAd->NicConfig2.word = NicConfig2.word;
@@ -1873,7 +1854,6 @@ VOID	NICInitAsicFromEEPROM(
     pAd->LedIndicatorStregth = 0xFF;
     RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Read Hardware controlled Radio state enable bit
@@ -1903,7 +1883,6 @@ VOID	NICInitAsicFromEEPROM(
 			RTMPSetLED(pAd, LED_RADIO_ON);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Turn off patching for cardbus controller
 	if (NicConfig2.field.CardbusAcceleration == 1)
@@ -1937,7 +1916,6 @@ VOID	NICInitAsicFromEEPROM(
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Handle the difference when 1T
@@ -1950,7 +1928,7 @@ VOID	NICInitAsicFromEEPROM(
 
 		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
 }
@@ -2142,7 +2120,6 @@ NDIS_STATUS	NICInitializeAsic(
 	}
 
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
@@ -2150,7 +2127,6 @@ NDIS_STATUS	NICInitializeAsic(
 			RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 #endif // RT2870 //
 
 #ifdef RT30xx
@@ -2302,7 +2278,6 @@ NDIS_STATUS	NICInitializeAsic(
 #endif // RT2870 //
 
 	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bRadio == FALSE)
@@ -2312,7 +2287,6 @@ NDIS_STATUS	NICInitializeAsic(
 			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Clear raw counters
 	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
@@ -2383,14 +2357,12 @@ NDIS_STATUS	NICInitializeAsic(
 	}
 #endif // RT30xx //
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
 		if ((pAd->MACVersion&0xffff) != 0x0101)
 			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
 	return NDIS_STATUS_SUCCESS;
@@ -3336,7 +3308,6 @@ VOID	UserCfgInit(
 	//
 	// part II. intialize STA specific configuration
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
@@ -3375,7 +3346,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// global variables mXXXX used in MAC protocol state machines
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
@@ -3386,7 +3356,6 @@ VOID	UserCfgInit(
 	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// user desired power mode
@@ -3431,7 +3400,6 @@ VOID	UserCfgInit(
 #endif // WPA_SUPPLICANT_SUPPORT //
 
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Default for extra information is not valid
 	pAd->ExtraInfo = EXTRA_INFO_CLEAR;

drivers/staging/rt3070/common/rtmp_tkip.c

@@ -691,9 +691,6 @@ VOID	RTMPCalculateMICValue(
 	// determine if this is a vlan packet
 	if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
 		vlan_offset = 4;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
 	{
 		RTMPInitMICEngine(
 			pAd,

drivers/staging/rt3070/common/rtmp_wep.c

@@ -153,14 +153,12 @@ VOID	RTMPInitWepEngine(
 
 	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
 
-#ifdef CONFIG_STA_SUPPORT
     if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
     {
         ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
         NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
     }
     else
-#endif // CONFIG_STA_SUPPORT //
     {
 		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
 

drivers/staging/rt3070/common/rtusb_bulk.c

@@ -319,7 +319,6 @@ VOID	RTUSBBulkOutDataPacket(
 			break;
 		}
 		//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		if (pTxInfo->QSEL != FIFO_EDCA)
@@ -329,7 +328,6 @@ VOID	RTUSBBulkOutDataPacket(
 			hex_dump("Wrong QSel Pkt:", (PUCHAR)&pWirelessPkt[TmpBulkEndPos], (pHTTXContext->CurWritePosition - pHTTXContext->NextBulkOutPosition));
 		}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		if (pTxInfo->USBDMATxPktLen <= 8)
 		{
@@ -356,10 +354,8 @@ VOID	RTUSBBulkOutDataPacket(
 		pLastTxInfo = pTxInfo;
 
 		// Make sure we use EDCA QUEUE.
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pTxInfo->QSEL = FIFO_EDCA; //PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
-#endif // CONFIG_STA_SUPPORT //
 		ThisBulkSize += (pTxInfo->USBDMATxPktLen+4);
 		TmpBulkEndPos += (pTxInfo->USBDMATxPktLen+4);
 
@@ -846,10 +842,8 @@ VOID	RTUSBBulkReceive(
 			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
 
 			// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
 
 			// Finish to handle this bulkIn buffer.
 			RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);

drivers/staging/rt3070/common/rtusb_io.c

@@ -1195,12 +1195,7 @@ VOID CMDHandler(
 			{
 				case CMDTHREAD_CHECK_GPIO:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT32 data;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-
 
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
@@ -1238,17 +1233,14 @@ VOID CMDHandler(
 								}
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
-#ifdef CONFIG_STA_SUPPORT
 				case CMDTHREAD_QKERIODIC_EXECUT:
 					{
 						StaQuickResponeForRateUpExec(NULL, pAd, NULL, NULL);
 					}
 					break;
-#endif // CONFIG_STA_SUPPORT //
 
 				case CMDTHREAD_RESET_BULK_OUT:
 					{
@@ -1578,7 +1570,6 @@ VOID CMDHandler(
 
 				case CMDTHREAD_SET_ASIC_WCID_CIPHER:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;
 						USHORT		offset;
 						UINT32		MACRValue = 0;
@@ -1630,7 +1621,6 @@ VOID CMDHandler(
 
 							RTUSBWriteMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), csr1.word);
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
@@ -1669,8 +1659,6 @@ VOID CMDHandler(
 						MAC_TABLE_ENTRY *pEntry;
 						pEntry = (MAC_TABLE_ENTRY *)pData;
 
-
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)pEntry->Aid);
@@ -1706,7 +1694,6 @@ VOID CMDHandler(
 								RTUSBWriteMACRegister(pAd, offset, 0);
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 
 						AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
 						printk("UpdateRxWCIDTable(): Aid=%d, Addr=%02x:%02x:%02x:%02x:%02x:%02x!\n", pEntry->Aid,
@@ -1724,7 +1711,6 @@ VOID CMDHandler(
 
 				case OID_802_11_ADD_WEP:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT	i;
 						UINT32	KeyIdx;
 						PNDIS_802_11_WEP	pWepKey;
@@ -1798,7 +1784,6 @@ VOID CMDHandler(
 							AsicAddSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx, CipherAlg, pWepKey->KeyMaterial, NULL, NULL);
 							DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP (KeyIdx=%d, Len=%d-byte)\n", KeyIdx, pWepKey->KeyLength));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 

drivers/staging/rt3070/common/spectrum.c

@@ -1453,10 +1453,8 @@ static VOID PeerChSwAnnAction(
 {
 	CH_SW_ANN_INFO ChSwAnnInfo;
 	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR index = 0, Channel = 0, NewChannel = 0;
 	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
 
 	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
 	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
@@ -1465,8 +1463,6 @@ static VOID PeerChSwAnnAction(
 		return;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
@@ -1513,7 +1509,6 @@ static VOID PeerChSwAnnAction(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return;
 }

drivers/staging/rt3070/mlme.h

@@ -77,12 +77,9 @@
 #define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
 #define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
 
-
-#ifdef CONFIG_STA_SUPPORT
 #ifndef CONFIG_AP_SUPPORT
 #define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 // Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
 // SHould not refer to this constant anymore
@@ -121,10 +118,7 @@
 
 #define BSS_NOT_FOUND                    0xFFFFFFFF
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define MAX_LEN_OF_MLME_QUEUE            40 //10
-#endif // CONFIG_STA_SUPPORT //
 
 #define SCAN_PASSIVE                     18		// scan with no probe request, only wait beacon and probe response
 #define SCAN_ACTIVE                      19		// scan with probe request, and wait beacon and probe response
@@ -855,13 +849,10 @@ typedef struct {
     UCHAR       EdcaUpdateCount;
 } QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct {
     UCHAR       IELen;
     UCHAR       IE[MAX_CUSTOM_LEN];
 } WPA_IE_;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct {
     UCHAR   Bssid[MAC_ADDR_LEN];
@@ -921,10 +912,8 @@ typedef struct {
 	EDCA_PARM           EdcaParm;
 	QOS_CAPABILITY_PARM QosCapability;
 	QBSS_LOAD_PARM      QbssLoad;
-#ifdef CONFIG_STA_SUPPORT
     WPA_IE_     WpaIE;
     WPA_IE_     RsnIE;
-#endif // CONFIG_STA_SUPPORT //
 } BSS_ENTRY, *PBSS_ENTRY;
 
 typedef struct {

drivers/staging/rt3070/oid.h

@@ -387,9 +387,6 @@ typedef struct PACKED _RADIUS_CONF
 	RADIUS_KEY_INFO	RadiusInfo[8/*MAX_MBSSID_NUM*/];
 } RADIUS_CONF, *PRADIUS_CONF;
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 // Key mapping keys require a BSSID
 typedef struct _NDIS_802_11_KEY
 {
@@ -400,7 +397,6 @@ typedef struct _NDIS_802_11_KEY
     NDIS_802_11_KEY_RSC KeyRSC;
     UCHAR           KeyMaterial[1];     // variable length depending on above field
 } NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _NDIS_802_11_REMOVE_KEY
 {
@@ -615,7 +611,6 @@ typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
 // PMKID Structures
 typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct _BSSID_INFO
 {
     NDIS_802_11_MAC_ADDRESS BSSID;
@@ -628,8 +623,6 @@ typedef struct _NDIS_802_11_PMKID
     UINT    BSSIDInfoCount;
     BSSID_INFO BSSIDInfo[1];
 } NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
 {
@@ -653,7 +646,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define SIOCIWFIRSTPRIV								SIOCDEVPRIVATE
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
 #define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
@@ -686,11 +678,6 @@ enum {
 	SHOW_CFG_VALUE = 20,
 };
 
-
-#endif // CONFIG_STA_SUPPORT //
-
-
-
 #define OID_802_11_BUILD_CHANNEL_EX				0x0714
 #define OID_802_11_GET_CH_LIST					0x0715
 #define OID_802_11_GET_COUNTRY_CODE				0x0716
@@ -698,7 +685,6 @@ enum {
 
 //#define RT_OID_802_11_STATISTICS              (OID_GET_SET_TOGGLE | OID_802_11_STATISTICS)
 
-#ifdef CONFIG_STA_SUPPORT
 #define RT_OID_WSC_SET_PASSPHRASE                   0x0740 // passphrase for wpa(2)-psk
 #define RT_OID_WSC_DRIVER_AUTO_CONNECT              0x0741
 #define RT_OID_WSC_QUERY_DEFAULT_PROFILE            0x0742
@@ -709,7 +695,7 @@ enum {
 #define RT_OID_WSC_SET_MODE                         0x0747 // PIN or PBC
 #define RT_OID_WSC_SET_CONF_MODE                    0x0748 // Enrollee or Registrar
 #define RT_OID_WSC_SET_PROFILE                      0x0749
-#endif // CONFIG_STA_SUPPORT //
+
 #define RT_OID_802_11_WSC_QUERY_PROFILE				0x0750
 // for consistency with RT61
 #define RT_OID_WSC_QUERY_STATUS						0x0751
@@ -948,7 +934,6 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
 } RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
 #endif // LLTD_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef WPA_SUPPLICANT_SUPPORT
 #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
 #define	RT_ASSOC_EVENT_FLAG                         0x0101
@@ -961,19 +946,15 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
 #define RT_INTERFACE_UP                             0x0108
 #endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 #endif // WPA_SUPPLICANT_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
-
 
 #define MAX_CUSTOM_LEN 128
 
-#ifdef CONFIG_STA_SUPPORT
 typedef enum _RT_802_11_D_CLIENT_MODE
 {
    Rt802_11_D_None,
    Rt802_11_D_Flexible,
    Rt802_11_D_Strict,
 } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _RT_CHANNEL_LIST_INFO
 {

drivers/staging/rt3070/rt_config.h

@@ -62,23 +62,16 @@
 #include	"chlist.h"
 #include	"spectrum.h"
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
 #ifdef IGMP_SNOOP_SUPPORT
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 #ifndef WPA_SUPPLICANT_SUPPORT
 #error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
 #endif // WPA_SUPPLICANT_SUPPORT //
 #endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
-#endif // CONFIG_STA_SUPPORT //
-
-
 #ifdef IKANOS_VX_1X0
 #include	"vr_ikans.h"
 #endif // IKANOS_VX_1X0 //

drivers/staging/rt3070/rt_linux.c

@@ -38,8 +38,6 @@ BUILD_TIMER_FUNCTION(AsicRfTuningExec);
 BUILD_TIMER_FUNCTION(BeaconUpdateExec);
 #endif // RT2870 //
 
-
-#ifdef CONFIG_STA_SUPPORT
 BUILD_TIMER_FUNCTION(BeaconTimeout);
 BUILD_TIMER_FUNCTION(ScanTimeout);
 BUILD_TIMER_FUNCTION(AuthTimeout);
@@ -49,7 +47,6 @@ BUILD_TIMER_FUNCTION(DisassocTimeout);
 BUILD_TIMER_FUNCTION(LinkDownExec);
 BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-#endif // CONFIG_STA_SUPPORT //
 
 
 
@@ -495,13 +492,10 @@ PNET_DEV get_netdev_from_bssid(
 {
     PNET_DEV dev_p = NULL;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		dev_p = pAd->net_dev;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	ASSERT(dev_p);
 	return dev_p; /* return one of MBSS */
@@ -657,10 +651,8 @@ void wlan_802_11_to_802_3_packet(
 	//
 	//
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -676,9 +668,6 @@ void announce_802_3_packet(
 
 	pRxPkt = RTPKT_TO_OSPKT(pPacket);
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
     /* Push up the protocol stack */
 #ifdef IKANOS_VX_1X0
 	IKANOS_DataFrameRx(pAd, pRxPkt->dev, pRxPkt, pRxPkt->len);
@@ -831,8 +820,6 @@ VOID RTMPSendWirelessEvent(
 #endif  /* WIRELESS_EXT >= 15 */
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 void send_monitor_packets(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	RX_BLK			*pRxBlk)
@@ -1003,8 +990,6 @@ void send_monitor_packets(
 	return;
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
 {

drivers/staging/rt3070/rt_linux.h

@@ -88,8 +88,6 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 
 // add by kathy
 
-#ifdef CONFIG_STA_SUPPORT
-
 #ifdef RT2870
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2870STA/RT2870STA.dat"
 #define STA_RT2870_IMAGE_FILE_NAME  "/etc/Wireless/RT2870STA/rt2870.bin"
@@ -97,9 +95,6 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 #define STA_DRIVER_VERSION			"2.0.1.0"
 #endif // RT2870 //
 
-#endif // CONFIG_STA_SUPPORT //
-
-
 #define RTMP_TIME_AFTER(a,b)		\
 	(typecheck(unsigned long, (unsigned long)a) && \
 	 typecheck(unsigned long, (unsigned long)b) && \
@@ -138,17 +133,12 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 #define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
 #define MIN_NET_DEVICE_FOR_APCLI		0x20
 #define MIN_NET_DEVICE_FOR_MESH			0x30
-#ifdef CONFIG_STA_SUPPORT
 #define MIN_NET_DEVICE_FOR_DLS			0x40
-#endif // CONFIG_STA_SUPPORT //
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define NDIS_PACKET_TYPE_DIRECTED		0
 #define NDIS_PACKET_TYPE_MULTICAST		1
 #define NDIS_PACKET_TYPE_BROADCAST		2
 #define NDIS_PACKET_TYPE_ALL_MULTICAST	3
-#endif // CONFIG_STA_SUPPORT //
 
 struct os_lock  {
 	spinlock_t		lock;
@@ -513,8 +503,6 @@ DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
 DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
 #endif // RT2870 //
 
-
-#ifdef CONFIG_STA_SUPPORT
 DECLARE_TIMER_FUNCTION(BeaconTimeout);
 DECLARE_TIMER_FUNCTION(ScanTimeout);
 DECLARE_TIMER_FUNCTION(AuthTimeout);
@@ -526,7 +514,6 @@ DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
 DECLARE_TIMER_FUNCTION(PsPollWakeExec);
 DECLARE_TIMER_FUNCTION(RadioOnExec);
-#endif // CONFIG_STA_SUPPORT //
 
 void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 

drivers/staging/rt3070/rt_main_dev.c

@@ -72,9 +72,7 @@ INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev)
 static void CfgInitHook(PRTMP_ADAPTER pAd);
 //static BOOLEAN RT28XXAvailRANameAssign(IN CHAR *name_p);
 
-#ifdef CONFIG_STA_SUPPORT
 extern	const struct iw_handler_def rt28xx_iw_handler_def;
-#endif // CONFIG_STA_SUPPORT //
 
 #if WIRELESS_EXT >= 12
 // This function will be called when query /proc
@@ -206,7 +204,6 @@ int rt28xx_close(IN PNET_DEV dev)
 	if (pAd == NULL)
 		return 0; // close ok
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 
@@ -267,7 +264,6 @@ int rt28xx_close(IN PNET_DEV dev)
 
 		MlmeRadioOff(pAd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
 
@@ -323,13 +319,10 @@ int rt28xx_close(IN PNET_DEV dev)
 	// Close kernel threads or tasklets
 	kill_thread_task(pAd);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		MacTableReset(pAd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 
 	MeasureReqTabExit(pAd);
@@ -439,10 +432,8 @@ static int rt28xx_init(IN struct net_device *net_dev)
 
 	CfgInitHook(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisAllocateSpinLock(&pAd->MacTabLock);
-#endif // CONFIG_STA_SUPPORT //
 
 	MeasureReqTabInit(pAd);
 	TpcReqTabInit(pAd);
@@ -502,8 +493,6 @@ static int rt28xx_init(IN struct net_device *net_dev)
 
 	// We should read EEPROM for all cases.  rt2860b
 	NICReadEEPROMParameters(pAd, mac);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
 
 	printk("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
 
@@ -643,9 +632,6 @@ int rt28xx_open(IN PNET_DEV dev)
 		return -1;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
 	// Init
  	pObj = (POS_COOKIE)pAd->OS_Cookie;
 
@@ -664,13 +650,11 @@ int rt28xx_open(IN PNET_DEV dev)
 	if (rt28xx_init(net_dev) == FALSE)
 		goto err;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
 		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set up the Mac address
 	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
@@ -682,7 +666,6 @@ int rt28xx_open(IN PNET_DEV dev)
 
 
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 #ifdef WPA_SUPPLICANT_SUPPORT
@@ -698,7 +681,6 @@ int rt28xx_open(IN PNET_DEV dev)
 #endif // WPA_SUPPLICANT_SUPPORT //
 
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Enable Interrupt
 	RT28XX_IRQ_ENABLE(pAd);
@@ -726,9 +708,6 @@ int rt28xx_open(IN PNET_DEV dev)
 
 	}
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
 	return (retval);
 
 err:
@@ -762,14 +741,12 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 	//ether_setup(dev);
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
-#ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		dev->wireless_handlers = &rt28xx_iw_handler_def;
 	}
 #endif //WIRELESS_EXT >= 12
-#endif // CONFIG_STA_SUPPORT //
 
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
@@ -840,9 +817,7 @@ INT __devinit   rt28xx_probe(
 #endif // RT2870 //
 
 
-#ifdef CONFIG_STA_SUPPORT
     DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
 
 	// Check chipset vendor/product ID
 //	if (RT28XXChipsetCheck(_dev_p) == FALSE)
@@ -882,9 +857,7 @@ INT __devinit   rt28xx_probe(
 
 	RT28XXNetDevInit(_dev_p, net_dev, pAd);
 
-#ifdef CONFIG_STA_SUPPORT
     pAd->StaCfg.OriDevType = net_dev->type;
-#endif // CONFIG_STA_SUPPORT //
 
 	// Find and assign a free interface name, raxx
 //	RT28XXAvailRANameAssign(net_dev->name);
@@ -893,9 +866,7 @@ INT __devinit   rt28xx_probe(
 	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
 		goto err_out_unmap;
 
-#ifdef CONFIG_STA_SUPPORT
 	pAd->OpMode = OPMODE_STA;
-#endif // CONFIG_STA_SUPPORT //
 
 	// sample move
 	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
@@ -954,7 +925,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Drop send request since we are in monitor mode
@@ -964,7 +934,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 			goto done;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
         // EapolStart size is 18
 	if (skb->len < 14)
@@ -983,17 +952,12 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
     }
 #endif
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 
 		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
 	}
 
-#endif // CONFIG_STA_SUPPORT //
-
 	status = 0;
 done:
 
@@ -1061,10 +1025,8 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 	if(pAd->iw_stats.qual.qual > 100)
 		pAd->iw_stats.qual.qual = 100;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
 
@@ -1116,13 +1078,10 @@ INT rt28xx_ioctl(
 		return -ENETDOWN;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return ret;
 }

drivers/staging/rt3070/rt_profile.c

@@ -756,8 +756,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 	//DefaultKeyID
 	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			KeyIdx = simple_strtol(tmpbuf, 0, 10);
@@ -768,7 +766,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 
 			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -783,7 +780,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 			    KeyType[i] = simple_strtol(macptr, 0, 10);
 		    }
 
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 				sprintf(tok_str, "Key%dStr", idx + 1);
@@ -792,13 +788,10 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 					rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
 				}
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 	}
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
 {
 	PUCHAR					macptr;
@@ -865,8 +858,6 @@ static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbu
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 NDIS_STATUS	RTMPReadParametersHook(
 	IN	PRTMP_ADAPTER pAd)
@@ -879,10 +870,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 	CHAR					*tmpbuf;
 	ULONG					RtsThresh;
 	ULONG					FragThresh;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR	                keyMaterial[40];
-#endif // CONFIG_STA_SUPPORT //
-
 
 	PUCHAR					macptr;
 	INT						i = 0;
@@ -898,10 +886,8 @@ NDIS_STATUS	RTMPReadParametersHook(
         return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		src = STA_PROFILE_PATH;
-#endif // CONFIG_STA_SUPPORT //
 
 	// Save uid and gid used for filesystem access.
 	// Set user and group to 0 (root)
@@ -975,8 +961,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 						pAd->CommonCfg.CountryCode[2] = ' ';
 					}
 
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//SSID
@@ -997,9 +981,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//NetworkType
@@ -1015,7 +997,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
 					//Channel
 					if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
 					{
@@ -1055,10 +1037,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 					if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
 					{
 						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-#ifdef CONFIG_STA_SUPPORT
+
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-#endif // CONFIG_STA_SUPPORT //
+
 						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
 					}
 					//BGProtection
@@ -1179,11 +1161,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 #endif // AGGREGATION_SUPPORT //
 
 					// WmmCapable
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-#endif // CONFIG_STA_SUPPORT //
 
 					//ShortSlot
 					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
@@ -1286,7 +1265,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 					//AuthMode
 					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
 					{
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
@@ -1312,13 +1290,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					//EncrypType
 					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
 					{
-
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
@@ -1339,12 +1314,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 							//RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
@@ -1409,7 +1380,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
 					//DefaultKeyID, KeyType, KeyStr
 					rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
@@ -1435,7 +1405,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 					HTParametersHook(pAd, tmpbuf, buffer);
 #endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//PSMode
@@ -1522,11 +1491,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 								DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
-
 
 #ifdef RT30xx
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if(RTMPGetKeyParameter("AntDiversity", tmpbuf, 10, buffer))
@@ -1542,7 +1508,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 								}
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 #endif // RT30xx //
 				}
 			}
@@ -1814,7 +1779,6 @@ static void	HTParametersHook(
 	{
 		UCHAR	fix_tx_mode;
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			fix_tx_mode = FIXED_TXMODE_HT;
@@ -1847,7 +1811,6 @@ static void	HTParametersHook(
 			DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
 
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -1892,8 +1855,6 @@ static void	HTParametersHook(
 	// MSC
 	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			Value = simple_strtol(pValueStr, 0, 10);
@@ -1912,7 +1873,6 @@ static void	HTParametersHook(
 				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// STBC

drivers/staging/rt3070/rtmp_def.h

@@ -1392,7 +1392,6 @@
 
 // End - WIRELESS EVENTS definition
 
-#ifdef CONFIG_STA_SUPPORT
 // definition for DLS, kathy
 #define	MAX_NUM_OF_INIT_DLS_ENTRY   1
 #define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
@@ -1410,7 +1409,6 @@
 /* Maximum size of the ESSID and pAd->nickname strings */
 #define IW_ESSID_MAX_SIZE   		32
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef MCAST_RATE_SPECIFIC
 #define MCAST_DISABLE	0