gpio: eic-sprd: Clear interrupt after set the interrupt type

The raw interrupt status of eic maybe set before the interrupt is enabled,
since the eic interrupt has a latch function, which would trigger the
interrupt event once enabled it from user side. To solve this problem,
interrupts generated before setting the interrupt trigger type are ignored.

Fixes: 25518e02 ("gpio: Add Spreadtrum EIC driver support")
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

drivers/gpio/gpio-eic-sprd.c

@@ -330,20 +330,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 		switch (flow_type) {
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
 			break;
 		case IRQ_TYPE_EDGE_RISING:
 		case IRQ_TYPE_EDGE_FALLING:
 		case IRQ_TYPE_EDGE_BOTH:
 			state = sprd_eic_get(chip, offset);
-			if (state)
+			if (state) {
 				sprd_eic_update(chip, offset,
 						SPRD_EIC_DBNC_IEV, 0);
-			else
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_DBNC_IC, 1);
+			} else {
 				sprd_eic_update(chip, offset,
 						SPRD_EIC_DBNC_IEV, 1);
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_DBNC_IC, 1);
+			}
 			break;
 		default:
 			return -ENOTSUPP;
@@ -355,20 +362,27 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 		switch (flow_type) {
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
 			break;
 		case IRQ_TYPE_EDGE_RISING:
 		case IRQ_TYPE_EDGE_FALLING:
 		case IRQ_TYPE_EDGE_BOTH:
 			state = sprd_eic_get(chip, offset);
-			if (state)
+			if (state) {
 				sprd_eic_update(chip, offset,
 						SPRD_EIC_LATCH_INTPOL, 0);
-			else
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_LATCH_INTCLR, 1);
+			} else {
 				sprd_eic_update(chip, offset,
 						SPRD_EIC_LATCH_INTPOL, 1);
+				sprd_eic_update(chip, offset,
+						SPRD_EIC_LATCH_INTCLR, 1);
+			}
 			break;
 		default:
 			return -ENOTSUPP;
@@ -382,29 +396,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_FALLING:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		default:
@@ -417,29 +436,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_FALLING:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_edge_irq);
 			break;
 		case IRQ_TYPE_LEVEL_HIGH:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
 			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+			sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
 			irq_set_handler_locked(data, handle_level_irq);
 			break;
 		default: