staging:rtl8192u: rename HT_CHANNEL_WIDTH -> enum ht_channel_width

remove the typedef HT_CHANNEL_WIDTH and replace with 'enum ht_channel_width'
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/ieee80211/ieee80211.h

@@ -2002,7 +2002,7 @@ struct ieee80211_device {
 	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
 	//added by wb for HT related
 //	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
-	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
+	void (*SetBWModeHandler)(struct net_device *dev, enum ht_channel_width Bandwidth, HT_EXTCHNL_OFFSET Offset);
 //	void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
 	bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);
 	void (*SetWirelessMode)(struct net_device *dev, u8 wireless_mode);
@@ -2358,7 +2358,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
 void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
 
 void HTSetConnectBwMode(struct ieee80211_device *ieee,
-			HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
+			enum ht_channel_width Bandwidth, HT_EXTCHNL_OFFSET Offset);
 void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
 void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap,
 				  u8 *len, u8 isEncrypt);

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c

@@ -303,7 +303,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work)
 	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
 	short chan;
 	HT_EXTCHNL_OFFSET chan_offset = 0;
-	HT_CHANNEL_WIDTH bandwidth = 0;
+	enum ht_channel_width bandwidth = 0;
 	int b40M = 0;
 
 	chan = ieee->current_network.channel;
@@ -320,7 +320,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work)
 	if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT && ieee->pHTInfo->bCurBW40MHz) {
 		b40M = 1;
 		chan_offset = ieee->pHTInfo->CurSTAExtChnlOffset;
-		bandwidth = (HT_CHANNEL_WIDTH)ieee->pHTInfo->bCurBW40MHz;
+		bandwidth = (enum ht_channel_width)ieee->pHTInfo->bCurBW40MHz;
 		printk("Scan in 40M, force to 20M first:%d, %d\n", chan_offset, bandwidth);
 		ieee->SetBWModeHandler(ieee->dev, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 		}

drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h

@@ -27,10 +27,10 @@
 //
 // Represent Channel Width in HT Capabilities
 //
-typedef enum _HT_CHANNEL_WIDTH {
+enum ht_channel_width {
 	HT_CHANNEL_WIDTH_20 = 0,
 	HT_CHANNEL_WIDTH_20_40 = 1,
-}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
+};
 
 //
 // Represent Extension Channel Offset in HT Capabilities

drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c

@@ -894,7 +894,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
 	return true;
 }
 
-void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET	Offset);
+void HTSetConnectBwMode(struct ieee80211_device *ieee, enum ht_channel_width	Bandwidth, HT_EXTCHNL_OFFSET	Offset);
 void HTOnAssocRsp(struct ieee80211_device *ieee)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
@@ -936,7 +936,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 //	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
 	// Config Supported Channel Width setting
 	//
-	HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
+	HTSetConnectBwMode(ieee, (enum ht_channel_width)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
 
 	pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth == 1);
 
@@ -1290,7 +1290,7 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
 /*
  * This function set bandwidth mode in protocol layer.
  */
-void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET	Offset)
+void HTSetConnectBwMode(struct ieee80211_device *ieee, enum ht_channel_width	Bandwidth, HT_EXTCHNL_OFFSET	Offset)
 {
 	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
 //	u32 flags = 0;

drivers/staging/rtl8192u/r8190_rtl8256.c

@@ -23,7 +23,7 @@
  * Note:	8226 support both 20M  and 40 MHz
  *--------------------------------------------------------------------------
  */
-void PHY_SetRF8256Bandwidth(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth)
+void PHY_SetRF8256Bandwidth(struct net_device *dev, enum ht_channel_width Bandwidth)
 {
 	u8	eRFPath;
 	struct r8192_priv *priv = ieee80211_priv(dev);

drivers/staging/rtl8192u/r8190_rtl8256.h

@@ -14,7 +14,7 @@
 #define RTL8225H
 
 #define RTL819X_TOTAL_RF_PATH 2 /* for 8192U */
-void PHY_SetRF8256Bandwidth(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth);
+void PHY_SetRF8256Bandwidth(struct net_device *dev, enum ht_channel_width Bandwidth);
 void PHY_RF8256_Config(struct net_device *dev);
 void phy_RF8256_Config_ParaFile(struct net_device *dev);
 void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8	powerlevel);

drivers/staging/rtl8192u/r8192U.h

@@ -996,7 +996,7 @@ typedef struct r8192_priv {
 	u8	SwChnlStage;
 	u8	SwChnlStep;
 	u8	SetBWModeInProgress;
-	HT_CHANNEL_WIDTH		CurrentChannelBW;
+	enum ht_channel_width 	CurrentChannelBW;
 	u8      ChannelPlan;
 	/* 8190 40MHz mode */
 	/* Control channel sub-carrier */

drivers/staging/rtl8192u/r819xU_phy.c

@@ -1663,7 +1663,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
  * notice:    I doubt whether SetBWModeInProgress flag is necessary as we can
  *	      test whether current work in the queue or not.//do I?
  *****************************************************************************/
-void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH bandwidth,
+void rtl8192_SetBWMode(struct net_device *dev, enum ht_channel_width bandwidth,
 		       HT_EXTCHNL_OFFSET offset)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);

drivers/staging/rtl8192u/r819xU_phy.h

@@ -79,7 +79,8 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
 				      RF90_RADIO_PATH_E eRFPath);
 
 u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
-void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH bandwidth,
+void rtl8192_SetBWMode(struct net_device *dev,
+		       enum ht_channel_width bandwidth,
 		       HT_EXTCHNL_OFFSET offset);
 void rtl8192_SwChnl_WorkItem(struct net_device *dev);
 void rtl8192_SetBWModeWorkItem(struct net_device *dev);