Commit 8559bbee authored by Heiko Stuebner's avatar Heiko Stuebner

arm64: dts: rockchip: add Google Bob

After Kevin, the second chromebook-incarnation of the Gru series is Bob.
This materializes as the Asus Chromebook Flip C101PA, whose formfactor
is quite similar to Minnie from the Veyron series.

Add the devicetree file and binding update for it.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent d67a38c5
......@@ -66,6 +66,15 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "geekbuying,geekbox", "rockchip,rk3368";
- Google Bob (Asus Chromebook Flip C101PA):
Required root node properties:
compatible = "google,bob-rev13", "google,bob-rev12",
"google,bob-rev11", "google,bob-rev10",
"google,bob-rev9", "google,bob-rev8",
"google,bob-rev7", "google,bob-rev6",
"google,bob-rev5", "google,bob-rev4",
"google,bob", "google,gru", "rockchip,rk3399";
- Google Brain (dev-board):
Required root node properties:
- compatible = "google,veyron-brain-rev0", "google,veyron-brain",
......
......@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Gru-Bob Rev 4+ board device tree source
*
* Copyright 2018 Google, Inc
*/
/dts-v1/;
#include "rk3399-gru-chromebook.dtsi"
/ {
model = "Google Bob";
compatible = "google,bob-rev13", "google,bob-rev12",
"google,bob-rev11", "google,bob-rev10",
"google,bob-rev9", "google,bob-rev8",
"google,bob-rev7", "google,bob-rev6",
"google,bob-rev5", "google,bob-rev4",
"google,bob", "google,gru", "rockchip,rk3399";
edp_panel: edp-panel {
compatible = "boe,nv101wxmn51", "simple-panel";
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
ports {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
};
};
};
&ap_i2c_ts {
touchscreen: touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&gpio3>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int_l &touch_reset_l>;
reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
};
};
&ap_i2c_tp {
trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
interrupt-parent = <&gpio1>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_int_l>;
wakeup-source;
};
};
&backlight {
pwms = <&cros_ec_pwm 0>;
};
&cpu_alert0 {
temperature = <65000>;
};
&cpu_alert1 {
temperature = <70000>;
};
&spi0 {
status = "okay";
};
&pinctrl {
tpm {
h1_int_od_l: h1-int-od-l {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment