net: dsa: lan9303: provide own phylink MAC operations

Convert lan9303 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide stubs for
the mac_link_down() and mac_config() methods which are mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rwfuE-007537-1u@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/lan9303-core.c

@@ -1293,14 +1293,29 @@ static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void lan9303_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state)
+{
+}
+
+static void lan9303_phylink_mac_link_down(struct phylink_config *config,
+					  unsigned int mode,
+					  phy_interface_t interface)
+{
+}
+
+static void lan9303_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause)
 {
-	struct lan9303 *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct lan9303 *chip = dp->ds->priv;
+	struct dsa_switch *ds = dp->ds;
+	int port = dp->index;
 	u32 ctl;
 	u32 reg;
 
@@ -1330,6 +1345,12 @@ static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	regmap_write(chip->regmap, flow_ctl_reg[port], reg);
 }
 
+static const struct phylink_mac_ops lan9303_phylink_mac_ops = {
+	.mac_config	= lan9303_phylink_mac_config,
+	.mac_link_down	= lan9303_phylink_mac_link_down,
+	.mac_link_up	= lan9303_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops lan9303_switch_ops = {
 	.get_tag_protocol	= lan9303_get_tag_protocol,
 	.setup			= lan9303_setup,
@@ -1337,7 +1358,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
 	.phy_read		= lan9303_phy_read,
 	.phy_write		= lan9303_phy_write,
 	.phylink_get_caps	= lan9303_phylink_get_caps,
-	.phylink_mac_link_up	= lan9303_phylink_mac_link_up,
 	.get_ethtool_stats	= lan9303_get_ethtool_stats,
 	.get_sset_count		= lan9303_get_sset_count,
 	.port_enable		= lan9303_port_enable,
@@ -1365,6 +1385,7 @@ static int lan9303_register_switch(struct lan9303 *chip)
 	chip->ds->num_ports = LAN9303_NUM_PORTS;
 	chip->ds->priv = chip;
 	chip->ds->ops = &lan9303_switch_ops;
+	chip->ds->phylink_mac_ops = &lan9303_phylink_mac_ops;
 	base = chip->phy_addr_base;
 	chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base);