Commit 8589086f authored by Hans de Goede's avatar Hans de Goede Committed by Marcel Holtmann

Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume

On many devices the RTL8723BS device gets reset during suspend/resume,
causing it to lose its firmware and all state.

Testing has shown it drops back to communicating at 115200 bps and sends
sync-request packages, indicating it has been fully reset.

This commit fixes this by queueing a reprobe on resume.

This mirrors how USB RTL BT devices, which have the same problem, are
handled in the btusb driver, there we set the USB_QUIRK_RESET_RESUME for
all RTL devices, which also causes a reprobe on resume. The only difference
is that here we need to do the reprobe ourselves.

Since we are doing a full reprobe on resume now, we can also turn off the
device on suspend to save power while suspended.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 28a75e4c
......@@ -931,6 +931,56 @@ static void h5_btrtl_close(struct h5 *h5)
gpiod_set_value_cansleep(h5->enable_gpio, 0);
}
/* Suspend/resume support. On many devices the RTL BT device loses power during
* suspend/resume, causing it to lose its firmware and all state. So we simply
* turn it off on suspend and reprobe on resume. This mirrors how RTL devices
* are handled in the USB driver, where the USB_QUIRK_RESET_RESUME is used which
* also causes a reprobe on resume.
*/
static int h5_btrtl_suspend(struct h5 *h5)
{
serdev_device_set_flow_control(h5->hu->serdev, false);
gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
gpiod_set_value_cansleep(h5->enable_gpio, 0);
return 0;
}
struct h5_btrtl_reprobe {
struct device *dev;
struct work_struct work;
};
static void h5_btrtl_reprobe_worker(struct work_struct *work)
{
struct h5_btrtl_reprobe *reprobe =
container_of(work, struct h5_btrtl_reprobe, work);
int ret;
ret = device_reprobe(reprobe->dev);
if (ret && ret != -EPROBE_DEFER)
dev_err(reprobe->dev, "Reprobe error %d\n", ret);
put_device(reprobe->dev);
kfree(reprobe);
module_put(THIS_MODULE);
}
static int h5_btrtl_resume(struct h5 *h5)
{
struct h5_btrtl_reprobe *reprobe;
reprobe = kzalloc(sizeof(*reprobe), GFP_KERNEL);
if (!reprobe)
return -ENOMEM;
__module_get(THIS_MODULE);
INIT_WORK(&reprobe->work, h5_btrtl_reprobe_worker);
reprobe->dev = get_device(&h5->hu->serdev->dev);
queue_work(system_long_wq, &reprobe->work);
return 0;
}
static const struct acpi_gpio_params btrtl_device_wake_gpios = { 0, 0, false };
static const struct acpi_gpio_params btrtl_enable_gpios = { 1, 0, false };
static const struct acpi_gpio_params btrtl_host_wake_gpios = { 2, 0, false };
......@@ -945,6 +995,8 @@ static struct h5_vnd rtl_vnd = {
.setup = h5_btrtl_setup,
.open = h5_btrtl_open,
.close = h5_btrtl_close,
.suspend = h5_btrtl_suspend,
.resume = h5_btrtl_resume,
.acpi_gpio_map = acpi_btrtl_gpios,
};
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment