ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h header

All dts files for the sunxi platform have been switched to the generic
pinconf bindings. As a result, the sunxi specific pinctrl macros are
no longer used.

Remove the #include entry with the following command:

    sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \
	arch/arm/boot/dts/sun?i*.*

arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra
empty line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele A1000";

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard";

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Miniand Hackberry";

arch/arm/boot/dts/sun4i-a10-inet1.dts

@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {

arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts

@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "iNet-9F Rev 03";

arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Jesurun Q5";

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "HAOYU Electronics Marsboard A10";

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "PineRiver Mini X-Plus";

arch/arm/boot/dts/sun4i-a10-mk802.dts

@@ -44,7 +44,6 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "MK802";

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A10-OLinuXino-LIME";

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -47,7 +47,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LinkSprite pcDuino";

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -47,7 +47,6 @@
 
 #include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts

@@ -44,7 +44,6 @@
 #include "sun5i-a10s.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Auxtek t003 A10s hdmi tv-stick";

arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts

@@ -44,7 +44,6 @@
 #include "sun5i-a10s.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Auxtek t004 A10s hdmi tv-stick";

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A10s-Olinuxino Micro";

arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "R7 A10s hdmi tv-stick";

arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "A10s-Wobo i5";

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -47,7 +47,6 @@
 #include "sun5i.dtsi"
 
 #include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&intc>;

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "HSG H702";

arch/arm/boot/dts/sun5i-a13-licheepi-one.dts

@@ -50,7 +50,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Lichee Pi One";

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A13-Olinuxino Micro";

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A13-Olinuxino";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -46,7 +46,6 @@
 
 #include "sun5i.dtsi"
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {

arch/arm/boot/dts/sun5i-gr8.dtsi

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/clock/sun5i-ccu.h>
 #include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/reset/sun5i-ccu.h>
 
 / {

arch/arm/boot/dts/sun5i.dtsi

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/clock/sun5i-ccu.h>
 #include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/reset/sun5i-ccu.h>
 
 / {

arch/arm/boot/dts/sun6i-a31-app4-evb1.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Allwinner A31 APP4 EVB1 Evaluation Board";

arch/arm/boot/dts/sun6i-a31-colombus.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "WITS A31 Colombus Evaluation Board";

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A31 Hummingbird";

arch/arm/boot/dts/sun6i-a31-i7.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele I7 Quad top set box";

arch/arm/boot/dts/sun6i-a31-m9.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele M9 top set box";

arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele A1000G Quad top set box";

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -48,7 +48,6 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {

arch/arm/boot/dts/sun6i-a31s-cs908.dts

@@ -43,8 +43,6 @@
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
 / {
 	model = "CSQ CS908 top set box";
 	compatible = "csq,cs908", "allwinner,sun6i-a31s";

arch/arm/boot/dts/sun6i-a31s-primo81.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "MSI Primo81 tablet";

arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Sinlinx SinA31s Core Board";

arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Yones TopTech BS1078 v2 Tablet";

arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi

@@ -44,7 +44,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	aliases {

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LeMaker Banana Pi";

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard2";

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubietruck";

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A20 Hummingbird";

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "I12 / Q5 / QT840A A20 tvbox";

arch/arm/boot/dts/sun7i-a20-icnova-swac.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "ICnova-A20 SWAC";

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Lamobo R1";

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele M3";

arch/arm/boot/dts/sun7i-a20-mk808c.dts

@@ -53,7 +53,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "mk808c";

arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts

@@ -48,7 +48,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-Olimex-SOM-EVB";

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -49,7 +49,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-OLinuXino-LIME";

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-OLinuXino-LIME2";

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -49,7 +49,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A20-Olinuxino Micro";

arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Orange Pi Mini";

arch/arm/boot/dts/sun7i-a20-orangepi.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Orange Pi";

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -48,7 +48,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LinkSprite pcDuino3";

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -49,7 +49,6 @@
 
 #include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -47,7 +47,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
 / {

arch/arm/boot/dts/sun8i-a23-evb.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Allwinner A23 Evaluation Board";

arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts

@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Sinlinx SinA33";

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -47,8 +47,6 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
 / {
 	interrupt-parent = <&gic>;
 

arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts

@@ -49,7 +49,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Xunlong Orange Pi Zero";

arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Banana Pi BPI-M2-Plus";

arch/arm/boot/dts/sun8i-h3-beelink-x2.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Beelink X2";

arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "FriendlyARM NanoPi NEO Air";

arch/arm/boot/dts/sun8i-h3-nanopi.dtsi

@@ -47,7 +47,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	aliases {

arch/arm/boot/dts/sun8i-h3-orangepi-2.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Xunlong Orange Pi 2";

arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Xunlong Orange Pi Lite";

arch/arm/boot/dts/sun8i-h3-orangepi-one.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Xunlong Orange Pi One";

arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts

@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Xunlong Orange Pi PC";

arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

@@ -47,7 +47,6 @@
 #include "sun9i-a80.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard4";

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -46,7 +46,6 @@
 #include "sun9i-a80.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A80 Optimus Board";

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -46,8 +46,6 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
 #include <dt-bindings/clock/sun9i-a80-ccu.h>
 #include <dt-bindings/clock/sun9i-a80-de.h>
 #include <dt-bindings/clock/sun9i-a80-usb.h>

arch/arm/boot/dts/sunxi-common-regulators.dtsi

@@ -43,7 +43,6 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 &pio {
 	ahci_pwr_pin_a: ahci_pwr_pin@0 {

arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi

@@ -42,7 +42,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include "sunxi-common-regulators.dtsi"
 
 &i2c0 {