Enable Voyager in current kernel

arch/i386/Kconfig

@@ -38,6 +38,33 @@ source "init/Kconfig"
 
 menu "Processor type and features"
 
+choice
+	prompt "Subarchitecture Type"
+	default PC
+
+config PC
+	bool PC
+	help
+	  Choose this option if your computer is a standard PC or compatible.
+
+config VOYAGER
+	bool "NCR Voyager Architecture"
+	---help---
+	  Voyager is a MCA based 32 way capable SMP architecture proprietary
+	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are voyager based.
+	  
+	  *** WARNING ***
+	
+	  If you do not specifically know you have a Voyager based machine,
+	  say N here otherwise the kernel you build will not be bootable.
+
+# Visual Workstation support is utterly broken.
+# If you want to see it working mail an VW540 to hch@infradead.org 8)
+#bool 'SGI Visual Workstation support' CONFIG_VISWS
+
+endchoice
+
+
 choice
 	prompt "Processor family"
 	default M686
@@ -337,6 +364,7 @@ config PREEMPT
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors" if !SMP
+	depends on !VOYAGER
 	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -690,6 +718,7 @@ endmenu
 
 
 menu "Power management options (ACPI, APM)"
+	depends on !VOYAGER
 
 config PM
 	bool "Power Management support"
@@ -990,9 +1019,6 @@ endmenu
 
 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
-# Visual Workstation support is utterly broken.
-# If you want to see it working mail an VW540 to hch@infradead.org 8)
-#bool 'SGI Visual Workstation support' CONFIG_VISWS
 config X86_VISWS_APIC
 	bool
 	depends on VISWS
@@ -1000,11 +1026,12 @@ config X86_VISWS_APIC
 
 config X86_LOCAL_APIC
 	bool
-	depends on !VISWS && SMP || VISWS
+	depends on ((!VISWS && SMP) || VISWS) && !VOYAGER
 	default y
 
 config PCI
 	bool "PCI support" if !VISWS
+	depends on !VOYAGER
 	default y if VISWS
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
@@ -1019,7 +1046,7 @@ config PCI
 
 config X86_IO_APIC
 	bool
-	depends on !VISWS && SMP
+	depends on !VISWS && SMP && !VOYAGER
 	default y
 
 choice
@@ -1063,6 +1090,7 @@ config PCI_DIRECT
 
 config SCx200
 	tristate "NatSemi SCx200 support"
+	depends on !VOYAGER
 	help
 	  This provides basic support for the National Semiconductor SCx200 
 	  processor.  Right now this is just a driver for the GPIO pins.
@@ -1076,6 +1104,7 @@ source "drivers/pci/Kconfig"
 
 config ISA
 	bool "ISA support"
+	depends on !VOYAGER
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1101,13 +1130,17 @@ config EISA
 
 config MCA
 	bool "MCA support"
-	depends on !VISWS
+	depends on !VISWS && !VOYAGER
 	help
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
 	  <file:Documentation/mca.txt> (and especially the web page given
 	  there) before attempting to build an MCA bus kernel.
 
+config MCA
+	depends on VOYAGER
+	default y if VOYAGER
+
 source "drivers/mca/Kconfig"
 
 config HOTPLUG
@@ -1574,12 +1607,12 @@ config FRAME_POINTER
 
 config X86_EXTRA_IRQS
 	bool
-	depends on X86_LOCAL_APIC
+	depends on X86_LOCAL_APIC || VOYAGER
 	default y
 
 config X86_FIND_SMP_CONFIG
 	bool
-	depends on X86_LOCAL_APIC
+	depends on X86_LOCAL_APIC || VOYAGER
 	default y
 
 config X86_MPPARSE
@@ -1597,15 +1630,16 @@ source "lib/Kconfig"
 
 config X86_SMP
 	bool
-	depends on SMP
+	depends on SMP && !VOYAGER
 	default y
 
 config X86_HT
 	bool
-	depends on SMP
+	depends on SMP && !VOYAGER
 	default y
 
 config X86_BIOS_REBOOT
 	bool
+	depends on !VOYAGER
 	default y
 

arch/i386/Makefile

@@ -51,6 +51,10 @@ CFLAGS += $(cflags-y)
 #default subarch .c files
 mcore-y  := mach-default
 
+#Voyager subarch support
+mflags-$(CONFIG_VOYAGER)	:= -Iinclude/asm-i386/mach-voyager
+mcore-$(CONFIG_VOYAGER)		:= mach-voyager
+
 #VISWS subarch support
 mflags-$(CONFIG_VISWS) := -Iinclude/asm-i386/mach-visws
 mcore-$(CONFIG_VISWS)  := mach-visws

arch/i386/boot/setup.S

@@ -476,6 +476,24 @@ sysdesc_ok:
 	movsb
 	popw	%ds
 no_mca:
+#ifdef CONFIG_VOYAGER
+	movb	$0xff, 0x40	# flag on config found
+	movb	$0xc0, %al
+	mov	$0xff, %ah
+	int	$0x15		# put voyager config info at es:di
+	jc	no_voyager
+	movw	$0x40, %si	# place voyager info in apm table
+	cld
+	movw	$7, %cx
+voyager_rep:
+	movb	%es:(%di), %al
+	movb	%al,(%si)
+	incw	%di
+	incw	%si
+	decw	%cx
+	jnz	voyager_rep
+no_voyager:	
+#endif
 # Check for PS/2 pointing device
 	movw	%cs, %ax			# aka SETUPSEG
 	subw	$DELTA_INITSEG, %ax		# aka INITSEG
@@ -740,6 +758,7 @@ A20_TEST_LOOPS		=  32		# Iterations per wait
 A20_ENABLE_LOOPS	= 255		# Total loops to try		
 
 
+#ifndef CONFIG_VOYAGER
 a20_try_loop:
 
 	# First, see if we are on a system with no A20 gate.
@@ -758,11 +777,14 @@ a20_bios:
 	jnz	a20_done
 
 	# Try enabling A20 through the keyboard controller
+#endif /* CONFIG_VOYAGER */
 a20_kbc:
 	call	empty_8042
 
+#ifndef CONFIG_VOYAGER
 	call	a20_test			# Just in case the BIOS worked
 	jnz	a20_done			# but had a delayed reaction.
+#endif
 
 	movb	$0xD1, %al			# command write
 	outb	%al, $0x64
@@ -772,6 +794,7 @@ a20_kbc:
 	outb	%al, $0x60
 	call	empty_8042
 
+#ifndef CONFIG_VOYAGER
 	# Wait until a20 really *is* enabled; it can take a fair amount of
 	# time on certain systems; Toshiba Tecras are known to have this
 	# problem.
@@ -819,6 +842,7 @@ a20_err_msg:
 	# If we get here, all is good
 a20_done:
 
+#endif /* CONFIG_VOYAGER */
 # set up gdt and idt
 	lidt	idt_48				# load idt with 0,0
 	xorl	%eax, %eax			# Compute gdt_base
@@ -985,6 +1009,7 @@ bootsect_panic_mess:
 	.string	"INT15 refuses to access high mem, giving up."
 
 
+#ifndef CONFIG_VOYAGER
 # This routine tests whether or not A20 is enabled.  If so, it
 # exits with zf = 0.
 #
@@ -1015,6 +1040,8 @@ a20_test_wait:
 	popw	%cx
 	ret	
 
+#endif /* CONFIG_VOYAGER */
+
 # This routine checks that the keyboard command queue is empty
 # (after emptying the output buffers)
 #

arch/i386/mach-voyager/voyager_smp.c

@@ -50,11 +50,6 @@ int smp_threads_ready = 0;
  * indexed physically */
 struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
 
-/* Per CPU interrupt stacks */
-extern union thread_union init_irq_union;
-union thread_union *irq_stacks[NR_CPUS] __cacheline_aligned =
-	{ &init_irq_union, };
-
 /* physical ID of the CPU used to boot the system */
 unsigned char boot_cpu_id;
 
@@ -450,6 +445,7 @@ smp_store_cpu_info(int id)
 	struct cpuinfo_x86 *c=&cpu_data[id];
 
 	*c = boot_cpu_data;
+
 	identify_cpu(c);
 }
 
@@ -512,6 +508,11 @@ start_secondary(void *unused)
 	/* if we're a quad, we may need to bootstrap other CPUs */
 	do_quad_bootstrap();
 
+	/* FIXME: this is rather a poor hack to prevent the CPU
+	 * activating softirqs while it's supposed to be waiting for
+	 * permission to proceed.  Without this, the new per CPU stuff
+	 * in the softirqs will fail */
+	local_irq_disable();
 	set_bit(cpuid, &cpu_callin_map);
 
 	/* signal that we're done */
@@ -519,6 +520,7 @@ start_secondary(void *unused)
 
 	while (!test_bit(cpuid, &smp_commenced_mask))
 		rep_nop();
+	local_irq_enable();
 
 	local_flush_tlb();
 
@@ -533,29 +535,7 @@ fork_by_hand(void)
 	struct pt_regs regs;
 	/* don't care about the eip and regs settings since we'll
 	 * never reschedule the forked task. */
-	return do_fork(CLONE_VM|CLONE_IDLETASK, 0, &regs, 0, NULL);
-}
-
-
-static void __init setup_irq_stack(struct task_struct *p, int cpu)
-{
-	unsigned long stk;
-
-	stk = __get_free_pages(GFP_KERNEL, THREAD_ORDER+1);
-	if (!stk)
-		panic("I can't seem to allocate my irq stack.  Oh well, giving up.");
-
-	irq_stacks[cpu] = (void *)stk;
-	memset(irq_stacks[cpu], 0, THREAD_SIZE);
-	irq_stacks[cpu]->thread_info.cpu = cpu;
-	irq_stacks[cpu]->thread_info.preempt_count = 1;
-					/* interrupts are not preemptable */
-	p->thread_info->irq_stack = irq_stacks[cpu];
-
-	/* If we want to make the irq stack more than one unit
-	 * deep, we can chain then off of the irq_stack pointer
-	 * here.
-	 */
+	return do_fork(CLONE_VM|CLONE_IDLETASK, 0, &regs, 0, NULL, NULL);
 }
 
 
@@ -617,20 +597,17 @@ do_boot_cpu(__u8 cpu)
 	if(IS_ERR(idle))
 		panic("failed fork for CPU%d", cpu);
 
-	setup_irq_stack(idle, cpu);
-
 	init_idle(idle, cpu);
 
 	idle->thread.eip = (unsigned long) start_secondary;
 	unhash_process(idle);
-
-	/* The -4 is to correct for the fact that the stack pointer
-	 * is used to find the location of the thread_info structure
-	 * by masking off several of the LSBs.  Without the -4, esp
-	 * is pointing to the page after the one the stack is on.
-	 */
-	stack_start.esp = (void *)(THREAD_SIZE - 4 + (char *)idle->thread_info);
-
+	/* init_tasks (in sched.c) is indexed logically */
+#if 0
+	// for AC kernels
+	stack_start.esp = (THREAD_SIZE + (__u8 *)TSK_TO_KSTACK(idle));
+#else
+	stack_start.esp = (void *) (1024 + PAGE_SIZE + (char *)idle->thread_info);
+#endif
 	/* Note: Don't modify initial ss override */
 	VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu, 
 		(unsigned long)hijack_source.val, hijack_source.idt.Segment,
@@ -764,6 +741,9 @@ smp_boot_cpus(void)
 
 	/* enable our own CPIs */
 	vic_enable_cpi();
+
+	set_bit(boot_cpu_id, &cpu_online_map);
+	set_bit(boot_cpu_id, &cpu_callout_map);
 	
 	/* loop over all the extended VIC CPUs and boot them.  The 
 	 * Quad CPUs must be bootstrapped by their extended VIC cpu */
@@ -1312,12 +1292,9 @@ smp_vic_timer_interrupt(struct pt_regs *regs)
 static inline void
 wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
 {
-	__u8 cpu = smp_processor_id();
-
 	irq_enter();
 	smp_local_timer_interrupt(regs);
 	irq_exit();
-	
 }
 
 /* local (per CPU) timer interrupt.  It does both profiling and

include/asm-i386/hw_irq.h

@@ -131,7 +131,7 @@ static inline int unregister_profile_notifier(struct notifier_block * nb)
 
 #endif /* CONFIG_PROFILING */
  
-#ifdef CONFIG_SMP /*more of this file should probably be ifdefed SMP */
+#if defined(CONFIG_SMP) && !defined(CONFIG_VOYAGER) /*more of this file should probably be ifdefed SMP */
 static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {
 	if (IO_APIC_IRQ(i))
 		send_IPI_self(IO_APIC_VECTOR(i));

include/asm-i386/smp.h

@@ -6,6 +6,7 @@
  */
 #ifndef __ASSEMBLY__
 #include <linux/config.h>
+#include <linux/kernel.h>
 #include <linux/threads.h>
 #endif
 
@@ -83,11 +84,22 @@ extern volatile unsigned long cpu_callout_map;
 #define cpu_possible(cpu) (cpu_callout_map & (1<<(cpu)))
 #define cpu_online(cpu) (cpu_online_map & (1<<(cpu)))
 
+#define for_each_cpu(cpu, mask) \
+	for(mask = cpu_online_map; \
+	    cpu = __ffs(mask), mask != 0; \
+	    mask &= ~(1<<cpu))
+
 extern inline unsigned int num_online_cpus(void)
 {
 	return hweight32(cpu_online_map);
 }
 
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+	return hweight32(cpu_callout_map);
+}
+
 extern inline int any_online_cpu(unsigned int mask)
 {
 	if (mask & cpu_online_map)
@@ -95,7 +107,7 @@ extern inline int any_online_cpu(unsigned int mask)
 
 	return -1;
 }
-
+#ifdef CONFIG_X86_LOCAL_APIC
 static __inline int hard_smp_processor_id(void)
 {
 	/* we don't want to mark this access volatile - bad code generation */
@@ -108,12 +120,7 @@ static __inline int logical_smp_processor_id(void)
 	return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
 }
 
-/* We don't mark CPUs online until __cpu_up(), so we need another measure */
-static inline int num_booting_cpus(void)
-{
-	return hweight32(cpu_callout_map);
-}
-
+#endif
 #endif /* !__ASSEMBLY__ */
 
 #define NO_PROC_ID		0xFF		/* No processor magic marker */