Commit 8615eb28 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

b43: N-PHY: support setting custom TX power

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ec76643b
......@@ -457,6 +457,7 @@ enum {
#define B43_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */
#define B43_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */
#define B43_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep frames with bad PLCP */
#define B43_MACCTL_PHY_LOCK 0x00200000
#define B43_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */
#define B43_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */
#define B43_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */
......
......@@ -34,6 +34,7 @@
#include "radio_2056.h"
#include "radio_2057.h"
#include "main.h"
#include "ppr.h"
struct nphy_txgains {
u16 tx_lpf[2];
......@@ -3606,16 +3607,6 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core,
* Tx and Rx
**************************************************/
static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev)
{//TODO
}
static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
bool ignore_tssi)
{//TODO
return B43_TXPWR_RES_DONE;
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */
static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
{
......@@ -4069,6 +4060,7 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
s16 a1[2], b0[2], b1[2];
u8 idle[2];
u8 ppr_max;
s8 target[2];
s32 num, den, pwr;
u32 regval[64];
......@@ -4147,7 +4139,12 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
b1[0] = b1[1] = -1393;
}
}
/* target[0] = target[1] = nphy->tx_power_max; */
ppr_max = b43_ppr_get_max(dev, &nphy->tx_pwr_max_ppr);
if (ppr_max) {
target[0] = ppr_max;
target[1] = ppr_max;
}
if (dev->phy.rev >= 3) {
if (sprom->fem.ghz2.tssipos)
......@@ -5889,6 +5886,69 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
b43_mac_enable(dev);
}
static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
bool ignore_tssi)
{
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = dev->phy.n;
struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan;
struct b43_ppr *ppr = &nphy->tx_pwr_max_ppr;
u8 max; /* qdBm */
bool tx_pwr_state;
if (nphy->tx_pwr_last_recalc_freq == channel->center_freq &&
nphy->tx_pwr_last_recalc_limit == phy->desired_txpower)
return B43_TXPWR_RES_DONE;
/* Make sure we have a clean PPR */
b43_ppr_clear(dev, ppr);
/* HW limitations */
b43_ppr_load_max_from_sprom(dev, ppr, B43_BAND_2G);
/* Regulatory & user settings */
max = INT_TO_Q52(phy->chandef->chan->max_power);
if (phy->desired_txpower)
max = min_t(u8, max, INT_TO_Q52(phy->desired_txpower));
b43_ppr_apply_max(dev, ppr, max);
if (b43_debug(dev, B43_DBG_XMITPOWER))
b43dbg(dev->wl, "Calculated TX power: " Q52_FMT "\n",
Q52_ARG(b43_ppr_get_max(dev, ppr)));
/* TODO: Enable this once we get gains working */
#if 0
/* Some extra gains */
hw_gain = 6; /* N-PHY specific */
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
hw_gain += sprom->antenna_gain.a0;
else
hw_gain += sprom->antenna_gain.a1;
b43_ppr_add(dev, ppr, -hw_gain);
#endif
/* Make sure we didn't go too low */
b43_ppr_apply_min(dev, ppr, INT_TO_Q52(8));
/* Apply */
tx_pwr_state = nphy->txpwrctrl;
b43_mac_suspend(dev);
b43_nphy_tx_power_ctl_setup(dev);
if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12) {
b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_PHY_LOCK);
b43_read32(dev, B43_MMIO_MACCTL);
udelay(1);
}
b43_nphy_tx_power_ctrl(dev, nphy->txpwrctrl);
if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12)
b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PHY_LOCK, 0);
b43_mac_enable(dev);
nphy->tx_pwr_last_recalc_freq = channel->center_freq;
nphy->tx_pwr_last_recalc_limit = phy->desired_txpower;
return B43_TXPWR_RES_DONE;
}
/**************************************************
* N-PHY init
**************************************************/
......@@ -6422,6 +6482,7 @@ static int b43_nphy_op_allocate(struct b43_wldev *dev)
nphy = kzalloc(sizeof(*nphy), GFP_KERNEL);
if (!nphy)
return -ENOMEM;
dev->phy.n = nphy;
return 0;
......@@ -6662,5 +6723,4 @@ const struct b43_phy_operations b43_phyops_n = {
.switch_channel = b43_nphy_op_switch_channel,
.get_default_chan = b43_nphy_op_get_default_chan,
.recalc_txpower = b43_nphy_op_recalc_txpower,
.adjust_txpower = b43_nphy_op_adjust_txpower,
};
......@@ -2,6 +2,7 @@
#define B43_NPHY_H_
#include "phy_common.h"
#include "ppr.h"
/* N-PHY registers. */
......@@ -967,6 +968,9 @@ struct b43_phy_n {
struct b43_phy_n_txpwrindex txpwrindex[2];
struct b43_phy_n_pwr_ctl_info pwr_ctl_info[2];
struct b43_chanspec txiqlocal_chanspec;
struct b43_ppr tx_pwr_max_ppr;
u16 tx_pwr_last_recalc_freq;
int tx_pwr_last_recalc_limit;
u8 txrx_chain;
u16 tx_rx_cal_phy_saveregs[11];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment