Merge tag 'omap-for-v5.14/cleanup-signed' of...

Merge tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Clean up changes for omaps for v5.14 merge window

With the recent changes to drop legacy platform data for
am3/4, omap4/5, and dra7, we can drop the related unused
code. There is also a patch to remove leading spaces from
the Kconfig file.

* tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: remove omap2_set_globals_control()
  ARM: OMAP2+: CM: remove omap2_set_globals_cm()
  ARM: OMAP1: Remove leading spaces in Kconfig
  MAINTAINERS: remove obsolete OMAP HWMOD DATA FOR OMAP4-BASED DEVICES

Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS

@@ -13347,12 +13347,6 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod*data*
 
-OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M:	Benoît Cousson <bcousson@baylibre.com>
-L:	linux-omap@vger.kernel.org
-S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-
 OMAP HWMOD SUPPORT
 M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap1/Kconfig

@@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
@@ -85,14 +85,14 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
 
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
-    	help
+	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
 	  and camera connector.  Say Y here if you have this board.
@@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 

arch/arm/mach-omap2/cm.h

@@ -26,7 +26,6 @@
 
 extern struct omap_domain_base cm_base;
 extern struct omap_domain_base cm2_base;
-extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
 # endif
 
 /*

arch/arm/mach-omap2/cm_common.c

@@ -37,19 +37,6 @@ struct omap_domain_base cm2_base;
 #define CM_NO_CLOCKS		0x1
 #define CM_SINGLE_INSTANCE	0x2
 
-/**
- * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
- * @cm: CM base virtual address
- * @cm2: CM2 base virtual address (if present on the booted SoC)
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
-{
-	cm_base.va = cm;
-	cm2_base.va = cm2;
-}
-
 /**
  * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
  * @idlest_reg: CM_IDLEST* virtual address

arch/arm/mach-omap2/control.c

@@ -136,11 +136,6 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-void __init omap2_set_globals_control(void __iomem *ctrl)
-{
-	omap2_ctrl_base = ctrl;
-}
-
 u8 omap_ctrl_readb(u16 offset)
 {
 	u32 val;

arch/arm/mach-omap2/control.h

@@ -528,7 +528,6 @@ extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-void omap2_set_globals_control(void __iomem *ctrl);
 void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0