Merge branch 'dt-bindings-net-convert-fsl-fman-related-file-to-yaml-format'

Frank Li says:

====================
dt-bindings: net: Convert fsl,fman related file to yaml format

Passed dt_binding_check
Run dt_binding_check: fsl,fman-mdio.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/net/fsl,fman-mdio.example.dts
  DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-mdio.example.dtb
Run dt_binding_check: fsl,fman-muram.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/net/fsl,fman-muram.example.dts
  DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-muram.example.dtb
Run dt_binding_check: fsl,fman-port.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/net/fsl,fman-port.example.dts
  DTC_CHK Documentation/devicetree/bindings/net/fsl,fman-port.example.dtb
Run dt_binding_check: fsl,fman.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/net/fsl,fman.example.dts
  DTC_CHK Documentation/devicetree/bindings/net/fsl,fman.example.dtb
Run dt_binding_check: ptp-qoriq.yaml
  SCHEMA  Documentation/devicetree/bindings/processed-schema.json
  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/ptp/ptp-qoriq.example.dts
  DTC_CHK Documentation/devicetree/bindings/ptp/ptp-qoriq.example.dtb

v1: https://lore.kernel.org/r/20240614-ls_fman-v1-0-cb33c96dc799@nxp.com
====================

Link: https://patch.msgid.link/20240618-ls_fman-v2-0-f00a82623d8e@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/fsl,fman-mdio.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager MDIO Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: FMan MDIO Node.
+  The MDIO is a bus to which the PHY devices are connected.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-mdio
+      - fsl,fman-xmdio
+      - fsl,fman-memac-mdio
+    description:
+      Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+      Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+      Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+      FMan v3.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: A reference to the input clock of the controller
+          from which the MDC frequency is derived.
+
+  interrupts:
+    maxItems: 1
+
+  fsl,fman-internal-mdio:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Fman has internal MDIO for internal PCS(Physical
+      Coding Sublayer) PHYs and external MDIO for external PHYs.
+      The settings and programming routines for internal/external
+      MDIO are different. Must be included for internal MDIO.
+
+  fsl,erratum-a009885:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates the presence of the A009885
+      erratum describing that the contents of MDIO_DATA may
+      become corrupt unless it is read within 16 MDC cycles
+      of MDIO_CFG[BSY] being cleared, when performing an
+      MDIO read operation.
+
+  fsl,erratum-a011043:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates the presence of the A011043 erratum
+      describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
+      set when reading internal PCS registers. MDIO reads to
+      internal PCS registers may result in having the
+      MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
+      read data (MDIO_DATA[MDIO_DATA]) is correct.
+      Software may get false read error when reading internal
+      PCS registers through MDIO. As a workaround, all internal
+      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
+
+      For internal PHY device on internal mdio bus, a PHY node should be created.
+      See the definition of the PHY node in booting-without-of.txt for an
+      example of how to define a PHY (Internal PHY has no interrupt line).
+      - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+      - For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+        The PCS PHY address should correspond to the value of the appropriate
+        MDEV_PORT.
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      IP block is little-endian mode. The default endian mode is big-endian.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@f1000 {
+        compatible = "fsl,fman-xmdio";
+        reg = <0xf1000 0x1000>;
+        interrupts = <101 2 0 0>;
+    };
+
+  - |
+    mdio@e3120 {
+        compatible = "fsl,fman-mdio";
+        reg = <0xe3120 0xee0>;
+        fsl,fman-internal-mdio;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tbi-phy@8 {
+            reg = <0x8>;
+            device_type = "tbi-phy";
+        };
+    };
+
+  - |
+    mdio@f1000 {
+        compatible = "fsl,fman-memac-mdio";
+        reg = <0xf1000 0x1000>;
+        fsl,fman-internal-mdio;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcsphy6: ethernet-phy@0 {
+            reg = <0x0>;
+        };
+    };
+

Documentation/devicetree/bindings/net/fsl,fman-muram.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager MURAM Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  FMan Internal memory - shared between all the FMan modules.
+  It contains data structures that are common and written to or read by
+  the modules.
+
+  FMan internal memory is split into the following parts:
+    Packet buffering (Tx/Rx FIFOs)
+    Frames internal context
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-muram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@0 {
+        compatible = "fsl,fman-muram";
+        reg = <0x0 0x28000>;
+    };

Documentation/devicetree/bindings/net/fsl,fman-port.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Port Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Frame Manager (FMan) supports several types of hardware ports:
+    Ethernet receiver (RX)
+    Ethernet transmitter (TX)
+    Offline/Host command (O/H)
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-v2-port-oh
+      - fsl,fman-v2-port-rx
+      - fsl,fman-v2-port-tx
+      - fsl,fman-v3-port-oh
+      - fsl,fman-v3-port-rx
+      - fsl,fman-v3-port-tx
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the hardware port id.
+      Each hardware port on the FMan has its own hardware PortID.
+      Super set of all hardware Port IDs available at FMan Reference
+      Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+      Each hardware port is assigned a 4KB, port-specific page in
+      the FMan hardware port memory region (which is part of the
+      FMan memory map). The first 4 KB in the FMan hardware ports
+      memory region is used for what are called common registers.
+      The subsequent 63 4KB pages are allocated to the hardware
+      ports.
+      The page of a specific port is determined by the cell-index.
+
+  reg:
+    items:
+      - description: There is one reg region describing the port
+          configuration registers.
+
+  fsl,fman-10g-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      If this property exists, the port is s 10G port.
+
+  fsl,fman-best-effort-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      Can be defined only if 10G-support is set.
+      This property marks a best-effort 10G port (10G port that
+      may not be capable of line rate).
+
+required:
+  - compatible
+  - reg
+  - cell-index
+
+additionalProperties: false
+
+examples:
+  - |
+    port@a8000 {
+        compatible = "fsl,fman-v2-port-tx";
+        reg = <0xa8000 0x1000>;
+        cell-index = <0x28>;
+    };
+

Documentation/devicetree/bindings/net/fsl,fman.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+  etc.) the FMan node will have child nodes for each of them.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman
+    description:
+      FMan version can be determined via FM_IP_REV_1 register in the
+      FMan block. The offset is 0xc4 from the beginning of the
+      Frame Processing Manager memory map (0xc3000 from the
+      beginning of the FMan node).
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the index of the FMan unit.
+
+      The cell-index value may be used by the SoC, to identify the
+      FMan unit in the SoC memory map. In the table below,
+      there's a description of the cell-index use in each SoC:
+
+      - P1023:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DEVDISR[1]      1    0
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_DEVDISR2[6]    1    0
+      DCFG_DEVDISR2[14]    2    1
+        (Second FM available only in P4080 and P5040)
+
+      - B4860, T1040, T2080, T4240:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[24]    1    0
+      DCFG_CCSR_DEVDISR2[25]    2    1
+        (Second FM available only in T4240)
+
+      DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    items:
+      - description: BMI configuration registers.
+      - description: QMI configuration registers.
+      - description: DMA configuration registers.
+      - description: FPM configuration registers.
+      - description: FMan controller configuration registers.
+    minItems: 1
+
+  ranges: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fmanclk
+
+  interrupts:
+    items:
+      - description: The first element is associated with the event interrupts.
+      - description: the second element is associated with the error interrupts.
+
+  fsl,qman-channel-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Specifies the range of the available dedicated
+      channels in the FMan. The first cell specifies the beginning
+      of the range and the second cell specifies the number of
+      channels
+    items:
+      - description: The first cell specifies the beginning of the range.
+      - description: |
+          The second cell specifies the number of channels.
+          Further information available at:
+          "Work Queue (WQ) Channel Assignments in the QMan" section
+          in DPAA Reference Manual.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/qman.txt
+
+  fsl,bman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/bman.txt
+
+  fsl,erratum-a050385:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: A boolean property. Indicates the presence of the
+      erratum A050385 which indicates that DMA transactions that are
+      split can result in a FMan lock.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,fman-muram.yaml
+
+  '^port@[a-f0-9]+$':
+    $ref: fsl,fman-port.yaml
+
+  '^ethernet@[a-f0-9]+$':
+    $ref: fsl,fman-dtsec.yaml
+
+  '^mdio@[a-f0-9]+$':
+    $ref: fsl,fman-mdio.yaml
+
+  '^phc@[a-f0-9]+$':
+    $ref: /schemas/ptp/fsl,ptp.yaml
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - fsl,qman-channel-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    fman@400000 {
+        compatible = "fsl,fman";
+        reg = <0x400000 0x100000>;
+        ranges = <0 0x400000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        cell-index = <1>;
+        clocks = <&fman_clk>;
+        clock-names = "fmanclk";
+        interrupts = <96 IRQ_TYPE_EDGE_FALLING>,
+                     <16 IRQ_TYPE_EDGE_FALLING>;
+        fsl,qman-channel-range = <0x40 0xc>;
+
+        muram@0 {
+            compatible = "fsl,fman-muram";
+            reg = <0x0 0x28000>;
+        };
+
+        port@81000 {
+            cell-index = <1>;
+            compatible = "fsl,fman-v2-port-oh";
+            reg = <0x81000 0x1000>;
+        };
+
+        fman1_rx_0x8: port@88000 {
+            cell-index = <0x8>;
+            compatible = "fsl,fman-v2-port-rx";
+            reg = <0x88000 0x1000>;
+        };
+
+        fman1_tx_0x28: port@a8000 {
+            cell-index = <0x28>;
+            compatible = "fsl,fman-v2-port-tx";
+            reg = <0xa8000 0x1000>;
+        };
+
+        ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            ptp-timer = <&ptp_timer>;
+            fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+            tbi-handle = <&tbi5>;
+        };
+
+        ptp_timer: phc@fe000 {
+            compatible = "fsl,fman-ptp-timer";
+            reg = <0xfe000 0x1000>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        mdio@f1000 {
+            compatible = "fsl,fman-xmdio";
+            reg = <0xf1000 0x1000>;
+            interrupts = <101 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt

@@ -86,4 +86,4 @@ Example:
 
 * Gianfar PTP clock nodes
 
-Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+Refer to Documentation/devicetree/bindings/ptp/fsl,ptp.yaml

Documentation/devicetree/bindings/ptp/fsl,ptp.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/fsl,ptp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ 1588 timer based PTP clock
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,etsec-ptp
+      - fsl,fman-ptp-timer
+      - fsl,dpaa2-ptp
+      - fsl,enetc-ptp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fsl,cksel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Timer reference clock source.
+
+      Reference clock source is determined by the value, which is holded
+      in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+      value, which will be directly written in those bits, that is why,
+      according to reference manual, the next clock sources can be used:
+
+      For eTSEC,
+      <0> - external high precision timer reference clock (TSEC_TMR_CLK
+            input is used for this purpose);
+      <1> - eTSEC system clock;
+      <2> - eTSEC1 transmit clock;
+      <3> - RTC clock input.
+
+      For DPAA FMan,
+      <0> - external high precision timer reference clock (TMR_1588_CLK)
+      <1> - MAC system clock (1/2 FMan clock)
+      <2> - reserved
+      <3> - RTC clock oscillator
+
+  fsl,tclk-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Timer reference clock period in nanoseconds.
+
+  fsl,tmr-prsc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Prescaler, divides the output clock.
+
+  fsl,tmr-add:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency compensation value.
+
+  fsl,tmr-fiper1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Fixed interval period pulse generator.
+      Supported only on DPAA2 and ENETC hardware.
+
+  fsl,max-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum frequency adjustment in parts per billion.
+
+      These properties set the operational parameters for the PTP
+      clock. You must choose these carefully for the clock to work right.
+      Here is how to figure good values:
+
+      TimerOsc     = selected reference clock   MHz
+      tclk_period  = desired clock period       nanoseconds
+      NominalFreq  = 1000 / tclk_period         MHz
+      FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+      tmr_add      = ceil(2^32 / FreqDivRatio)
+      OutputClock  = NominalFreq / tmr_prsc     MHz
+      PulseWidth   = 1 / OutputClock            microseconds
+      FiperFreq1   = desired frequency in Hz
+      FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+      tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+      max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+      The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+      driver expects that tmr_fiper1 will be correctly set to produce a 1
+      Pulse Per Second (PPS) signal, since this will be offered to the PPS
+      subsystem to synchronize the Linux clock.
+
+      When this attribute is not used, the IEEE 1588 timer reference clock
+      will use the eTSEC system clock (for Gianfar) or the MAC system
+      clock (for DPAA).
+
+  fsl,extts-fifo:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates hardware
+      support for the external trigger stamp FIFO
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates the 1588 timer
+      support for the external trigger stamp FIFO.
+      IP block is little-endian mode. The default endian mode
+      is big-endian.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    phc@24e00 {
+        compatible = "fsl,etsec-ptp";
+        reg = <0x24e00 0xb0>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-parent = <&ipic>;
+        fsl,cksel       = <1>;
+        fsl,tclk-period = <10>;
+        fsl,tmr-prsc    = <100>;
+        fsl,tmr-add     = <0x999999a4>;
+        fsl,tmr-fiper1  = <0x3b9ac9f6>;
+        fsl,tmr-fiper2  = <0x00018696>;
+        fsl,max-adj     = <659999998>;
+    };

Documentation/devicetree/bindings/ptp/ptp-qoriq.txt

-* Freescale QorIQ 1588 timer based PTP clock
-
-General Properties:
-
-  - compatible   Should be "fsl,etsec-ptp" for eTSEC
-                 Should be "fsl,fman-ptp-timer" for DPAA FMan
-                 Should be "fsl,dpaa2-ptp" for DPAA2
-                 Should be "fsl,enetc-ptp" for ENETC
-  - reg          Offset and length of the register set for the device
-  - interrupts   There should be at least two interrupts. Some devices
-                 have as many as four PTP related interrupts.
-
-Clock Properties:
-
-  - fsl,cksel        Timer reference clock source.
-  - fsl,tclk-period  Timer reference clock period in nanoseconds.
-  - fsl,tmr-prsc     Prescaler, divides the output clock.
-  - fsl,tmr-add      Frequency compensation value.
-  - fsl,tmr-fiper1   Fixed interval period pulse generator.
-  - fsl,tmr-fiper2   Fixed interval period pulse generator.
-  - fsl,tmr-fiper3   Fixed interval period pulse generator.
-                     Supported only on DPAA2 and ENETC hardware.
-  - fsl,max-adj      Maximum frequency adjustment in parts per billion.
-  - fsl,extts-fifo   The presence of this property indicates hardware
-		     support for the external trigger stamp FIFO.
-  - little-endian    The presence of this property indicates the 1588 timer
-		     IP block is little-endian mode. The default endian mode
-		     is big-endian.
-
-  These properties set the operational parameters for the PTP
-  clock. You must choose these carefully for the clock to work right.
-  Here is how to figure good values:
-
-  TimerOsc     = selected reference clock   MHz
-  tclk_period  = desired clock period       nanoseconds
-  NominalFreq  = 1000 / tclk_period         MHz
-  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
-  tmr_add      = ceil(2^32 / FreqDivRatio)
-  OutputClock  = NominalFreq / tmr_prsc     MHz
-  PulseWidth   = 1 / OutputClock            microseconds
-  FiperFreq1   = desired frequency in Hz
-  FiperDiv1    = 1000000 * OutputClock / FiperFreq1
-  tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
-  max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
-
-  The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
-  driver expects that tmr_fiper1 will be correctly set to produce a 1
-  Pulse Per Second (PPS) signal, since this will be offered to the PPS
-  subsystem to synchronize the Linux clock.
-
-  Reference clock source is determined by the value, which is holded
-  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
-  value, which will be directly written in those bits, that is why,
-  according to reference manual, the next clock sources can be used:
-
-  For eTSEC,
-  <0> - external high precision timer reference clock (TSEC_TMR_CLK
-        input is used for this purpose);
-  <1> - eTSEC system clock;
-  <2> - eTSEC1 transmit clock;
-  <3> - RTC clock input.
-
-  For DPAA FMan,
-  <0> - external high precision timer reference clock (TMR_1588_CLK)
-  <1> - MAC system clock (1/2 FMan clock)
-  <2> - reserved
-  <3> - RTC clock oscillator
-
-  When this attribute is not used, the IEEE 1588 timer reference clock
-  will use the eTSEC system clock (for Gianfar) or the MAC system
-  clock (for DPAA).
-
-Example:
-
-	ptp_clock@24e00 {
-		compatible = "fsl,etsec-ptp";
-		reg = <0x24E00 0xB0>;
-		interrupts = <12 0x8 13 0x8>;
-		interrupt-parent = < &ipic >;
-		fsl,cksel       = <1>;
-		fsl,tclk-period = <10>;
-		fsl,tmr-prsc    = <100>;
-		fsl,tmr-add     = <0x999999A4>;
-		fsl,tmr-fiper1  = <0x3B9AC9F6>;
-		fsl,tmr-fiper2  = <0x00018696>;
-		fsl,max-adj     = <659999998>;
-	};

MAINTAINERS

@@ -8809,14 +8809,14 @@ M:	Madalin Bucur <madalin.bucur@nxp.com>
 R:	Sean Anderson <sean.anderson@seco.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/fsl-fman.txt
+F:	Documentation/devicetree/bindings/net/fsl-fman.yaml
 F:	drivers/net/ethernet/freescale/fman
 
 FREESCALE QORIQ PTP CLOCK DRIVER
 M:	Yangbo Lu <yangbo.lu@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+F:	Documentation/devicetree/bindings/ptp/fsl,ptp.yaml
 F:	drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp*
 F:	drivers/net/ethernet/freescale/dpaa2/dprtc*
 F:	drivers/net/ethernet/freescale/enetc/enetc_ptp.c