Commit 86619c38 authored by Eric Anholt's avatar Eric Anholt

dt-bindings: new binding for Himax HX8357D display panels

This adds a new binding for Himax HX8357D display panels. It includes
a compatible string for one display (more can be added in the future).

The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
Screen for Raspberry Pi.

[1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads

This binding is closely modeled after the ili9341 binding, for a
similar product from adafruit.  The primary difference is that the
hx8357d doesn't have a reset line that I can find in the schematics.

v2: Document the "reg" property (requested by Rob), fix commit message
    typo (Noralf)
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.netReviewed-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarNoralf Trønnes <noralf@tronnes.org>
parent dff906c3
Himax HX8357D display panels
This binding is for display panels using a Himax HX8357D controller in SPI
mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
Required properties:
- compatible: "adafruit,yx350hv15", "himax,hx8357d"
- dc-gpios: D/C pin
- reg: address of the panel on the SPI bus
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in ../spi/spi-bus.txt must be specified.
Optional properties:
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
- backlight: phandle of the backlight device attached to the panel
Example:
display@0{
compatible = "adafruit,yx350hv15", "himax,hx8357d";
reg = <0>;
spi-max-frequency = <32000000>;
dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
rotation = <90>;
backlight = <&backlight>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment