extcon: Use the extcon_set_state_sync() instead of deprecated functions

This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().

Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()

[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>

drivers/extcon/extcon-adc-jack.c

@@ -75,7 +75,7 @@ static void adc_jack_handler(struct work_struct *work)
 	for (i = 0; i < data->num_conditions; i++) {
 		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			extcon_set_cable_state_(data->edev, def->id, true);
+			extcon_set_state_sync(data->edev, def->id, true);
 			return;
 		}
 	}
@@ -83,7 +83,7 @@ static void adc_jack_handler(struct work_struct *work)
 	/* Set the detached state if adc value is not included in the range */
 	for (i = 0; i < data->num_conditions; i++) {
 		def = &data->adc_conditions[i];
-		extcon_set_cable_state_(data->edev, def->id, false);
+		extcon_set_state_sync(data->edev, def->id, false);
 	}
 }
 

drivers/extcon/extcon-arizona.c

@@ -614,7 +614,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 			ret);
@@ -649,7 +649,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	else
 		report = EXTCON_JACK_HEADPHONE;
 
-	ret = extcon_set_cable_state_(info->edev, report, true);
+	ret = extcon_set_state_sync(info->edev, report, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
 			ret);
@@ -732,7 +732,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -789,7 +789,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -829,7 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	mutex_lock(&info->lock);
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 				ret);
@@ -914,7 +914,7 @@ static void arizona_micd_detect(struct work_struct *work)
 
 		arizona_identify_headphone(info);
 
-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_JACK_MICROPHONE, true);
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
@@ -1108,7 +1108,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 	if (info->last_jackdet == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_MECHANICAL, true);
 
 		if (ret != 0)
@@ -1150,7 +1150,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		input_sync(info->input);
 
 		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
-			ret = extcon_set_cable_state_(info->edev,
+			ret = extcon_set_state_sync(info->edev,
 					arizona_cable[i], false);
 			if (ret != 0)
 				dev_err(arizona->dev,

drivers/extcon/extcon-axp288.c

@@ -226,7 +226,7 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 	}
 
 	if (notify_charger)
-		extcon_set_cable_state_(info->edev, cable, vbus_attach);
+		extcon_set_state_sync(info->edev, cable, vbus_attach);
 
 	/* Clear the flags on disconnect event */
 	if (!vbus_attach)

drivers/extcon/extcon-gpio.c

@@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
+	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)

drivers/extcon/extcon-max14577.c

@@ -357,7 +357,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -454,24 +454,24 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:

drivers/extcon/extcon-max3355.c

@@ -39,16 +39,16 @@ static irqreturn_t max3355_id_irq(int irq, void *dev_id)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true);
 	}
 
 	return IRQ_HANDLED;

drivers/extcon/extcon-max77693.c

@@ -505,8 +505,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		dock_id = EXTCON_DOCK;
@@ -514,8 +514,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 		dock_id = EXTCON_DOCK;
 		if (!attached) {
-			extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_USB, false);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						false);
 		}
 		break;
@@ -530,7 +530,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 					attached);
 	if (ret < 0)
 		return ret;
-	extcon_set_cable_state_(info->edev, dock_id, attached);
+	extcon_set_state_sync(info->edev, dock_id, attached);
 
 out:
 	return 0;
@@ -596,7 +596,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
@@ -604,14 +604,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -653,7 +653,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -807,10 +807,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev,
+				extcon_set_state_sync(info->edev,
 					EXTCON_DISP_MHL, cable_attached);
 			break;
 		}
@@ -834,13 +834,13 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection.
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);
 
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+				extcon_set_state_sync(info->edev, EXTCON_DOCK,
 							cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
@@ -869,9 +869,9 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+			extcon_set_state_sync(info->edev, EXTCON_DOCK,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
 						attached);
 			break;
 		}
@@ -905,28 +905,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:

drivers/extcon/extcon-max77843.c

@@ -346,7 +346,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
@@ -356,7 +356,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -392,7 +392,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -486,8 +486,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
@@ -497,7 +497,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
@@ -507,7 +507,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
@@ -517,7 +517,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
@@ -527,7 +527,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
@@ -536,10 +536,10 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:

drivers/extcon/extcon-max8997.c

@@ -331,11 +331,11 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 
 	switch (usb_type) {
 	case MAX8997_USB_HOST:
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX8997_USB_DEVICE:
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	default:
@@ -361,7 +361,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 	switch (cable_type) {
 	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -384,7 +384,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		return ret;
 	}
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -406,7 +406,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -489,19 +489,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	default:

drivers/extcon/extcon-palmas.c

@@ -61,7 +61,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
-			extcon_set_cable_state_(edev, EXTCON_USB, true);
+			extcon_set_state_sync(edev, EXTCON_USB, true);
 			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -70,7 +70,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-			extcon_set_cable_state_(edev, EXTCON_USB, false);
+			extcon_set_state_sync(edev, EXTCON_USB, false);
 			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -98,7 +98,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -106,17 +106,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}
 
@@ -137,10 +137,10 @@ static void palmas_gpio_id_detect(struct work_struct *work)
 	id = gpiod_get_value_cansleep(palmas_usb->id_gpiod);
 
 	if (id) {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	}
 }

drivers/extcon/extcon-rt8973a.c

@@ -398,9 +398,9 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 
 	return 0;

drivers/extcon/extcon-sm5502.c

@@ -411,9 +411,9 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 
 	return 0;

drivers/extcon/extcon-usb-gpio.c

@@ -63,16 +63,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
 	}
 }