Commit 872cd4c2 authored by Ganesan Ramalingam's avatar Ganesan Ramalingam Committed by Ralf Baechle

MIPS: Netlogic: Fix for SATA PHY init

Update to the SATA PHY initialization. This is needed for SATA detection
to succeed in all configurations.
Signed-off-by: default avatarGanesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: default avatarJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8886/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent b083518c
...@@ -203,6 +203,7 @@ static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel) ...@@ -203,6 +203,7 @@ static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
static void config_sata_phy(u64 regbase) static void config_sata_phy(u64 regbase)
{ {
u32 port, i, reg; u32 port, i, reg;
u8 val;
for (port = 0; port < 2; port++) { for (port = 0; port < 2; port++) {
for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
...@@ -210,6 +211,18 @@ static void config_sata_phy(u64 regbase) ...@@ -210,6 +211,18 @@ static void config_sata_phy(u64 regbase)
for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
write_phy_reg(regbase, reg, port, sata_phy_config2[i]); write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
/* Fix for PHY link up failures at lower temperatures */
write_phy_reg(regbase, 0x800F, port, 0x1f);
val = read_phy_reg(regbase, 0x0029, port);
write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
val = read_phy_reg(regbase, 0x0056, port);
write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
val = read_phy_reg(regbase, 0x0018, port);
write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
} }
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment