Commit 8772c0bb authored by Zack Rusin's avatar Zack Rusin

drm/vmwgfx: Cleanup pci resource allocation

Instead of doing it in multiple spots lets centralize the code
to handle pci resources. This also cleans up the error
handling a bit and will make it a lot easier to add additional
svga versions to the driver.
Signed-off-by: default avatarZack Rusin <zackr@vmware.com>
Reviewed-by: default avatarMartin Krastev <krastevm@vmware.com>
Reviewed-by: default avatarRoland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414040/?series=85516&rev=2
parent be4f77ac
......@@ -43,8 +43,6 @@
#include "vmwgfx_drv.h"
#define VMWGFX_DRIVER_DESC "Linux drm driver for VMware graphics devices"
#define VMWGFX_CHIP_SVGAII 0
#define VMW_FB_RESERVATION 0
#define VMW_MIN_INITIAL_WIDTH 800
#define VMW_MIN_INITIAL_HEIGHT 600
......@@ -253,8 +251,8 @@ static const struct drm_ioctl_desc vmw_ioctls[] = {
};
static const struct pci_device_id vmw_pci_id_list[] = {
{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
{0, 0, 0}
{ PCI_DEVICE(0x15ad, VMWGFX_PCI_ID_SVGA2) },
{ }
};
MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
......@@ -644,19 +642,83 @@ static void vmw_vram_manager_fini(struct vmw_private *dev_priv)
#endif
}
static int vmw_driver_load(struct vmw_private *dev_priv, unsigned long chipset)
static int vmw_setup_pci_resources(struct vmw_private *dev,
unsigned long pci_id)
{
resource_size_t fifo_start;
resource_size_t fifo_size;
int ret;
struct pci_dev *pdev = to_pci_dev(dev->drm.dev);
pci_set_master(pdev);
ret = pci_request_regions(pdev, "vmwgfx probe");
if (ret)
return ret;
dev->io_start = pci_resource_start(pdev, 0);
dev->vram_start = pci_resource_start(pdev, 1);
dev->vram_size = pci_resource_len(pdev, 1);
fifo_start = pci_resource_start(pdev, 2);
fifo_size = pci_resource_len(pdev, 2);
DRM_INFO("FIFO at %pa size is %llu kiB\n",
&fifo_start, (uint64_t)fifo_size / 1024);
dev->fifo_mem = devm_memremap(dev->drm.dev,
fifo_start,
fifo_size,
MEMREMAP_WB);
if (unlikely(dev->fifo_mem == NULL)) {
DRM_ERROR("Failed mapping FIFO memory.\n");
return -ENOMEM;
}
/*
* This is approximate size of the vram, the exact size will only
* be known after we read SVGA_REG_VRAM_SIZE. The PCI resource
* size will be equal to or bigger than the size reported by
* SVGA_REG_VRAM_SIZE.
*/
DRM_INFO("VRAM at %pa size is %llu kiB\n",
&dev->vram_start, (uint64_t)dev->vram_size / 1024);
return 0;
}
static int vmw_detect_version(struct vmw_private *dev)
{
uint32_t svga_id;
vmw_write(dev, SVGA_REG_ID, SVGA_ID_2);
svga_id = vmw_read(dev, SVGA_REG_ID);
if (svga_id != SVGA_ID_2) {
DRM_ERROR("Unsupported SVGA ID 0x%x on chipset 0x%x\n",
svga_id, dev->vmw_chipset);
return -ENOSYS;
}
return 0;
}
static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id)
{
int ret;
enum vmw_res_type i;
bool refuse_dma = false;
char host_log[100] = {0};
struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
pci_set_master(pdev);
dev_priv->vmw_chipset = chipset;
dev_priv->vmw_chipset = pci_id;
dev_priv->last_read_seqno = (uint32_t) -100;
dev_priv->drm.dev_private = dev_priv;
ret = vmw_setup_pci_resources(dev_priv, pci_id);
if (ret)
return ret;
ret = vmw_detect_version(dev_priv);
if (ret)
return ret;
mutex_init(&dev_priv->cmdbuf_mutex);
mutex_init(&dev_priv->release_mutex);
mutex_init(&dev_priv->binding_mutex);
......@@ -681,21 +743,10 @@ static int vmw_driver_load(struct vmw_private *dev_priv, unsigned long chipset)
dev_priv->used_memory_size = 0;
dev_priv->io_start = pci_resource_start(pdev, 0);
dev_priv->vram_start = pci_resource_start(pdev, 1);
dev_priv->fifo_mem_start = pci_resource_start(pdev, 2);
dev_priv->assume_16bpp = !!vmw_assume_16bpp;
dev_priv->enable_fb = enable_fbdev;
vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
svga_id = vmw_read(dev_priv, SVGA_REG_ID);
if (svga_id != SVGA_ID_2) {
ret = -ENOSYS;
DRM_ERROR("Unsupported SVGA ID 0x%x\n", svga_id);
goto out_err0;
}
dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES);
......@@ -799,21 +850,6 @@ static int vmw_driver_load(struct vmw_private *dev_priv, unsigned long chipset)
}
DRM_INFO("Maximum display memory size is %llu kiB\n",
(uint64_t)dev_priv->prim_bb_mem / 1024);
DRM_INFO("VRAM at %pa size is %llu kiB\n",
&dev_priv->vram_start, (uint64_t)dev_priv->vram_size / 1024);
DRM_INFO("MMIO at %pa size is %llu kiB\n",
&dev_priv->fifo_mem_start, (uint64_t)dev_priv->fifo_mem_size / 1024);
dev_priv->fifo_mem = devm_memremap(dev_priv->drm.dev,
dev_priv->fifo_mem_start,
dev_priv->fifo_mem_size,
MEMREMAP_WB);
if (unlikely(dev_priv->fifo_mem == NULL)) {
ret = -ENOMEM;
DRM_ERROR("Failed mapping the FIFO MMIO.\n");
goto out_err0;
}
/* Need mmio memory to check for fifo pitchlock cap. */
if (!(dev_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) &&
......@@ -833,14 +869,6 @@ static int vmw_driver_load(struct vmw_private *dev_priv, unsigned long chipset)
goto out_err0;
}
dev_priv->drm.dev_private = dev_priv;
ret = pci_request_regions(pdev, "vmwgfx probe");
if (ret) {
DRM_ERROR("Failed reserving PCI regions.\n");
goto out_no_device;
}
if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
ret = vmw_irq_install(&dev_priv->drm, pdev->irq);
if (ret != 0) {
......@@ -988,7 +1016,6 @@ static int vmw_driver_load(struct vmw_private *dev_priv, unsigned long chipset)
vmw_irq_uninstall(&dev_priv->drm);
out_no_irq:
pci_release_regions(pdev);
out_no_device:
ttm_object_device_release(&dev_priv->tdev);
out_err0:
for (i = vmw_res_context; i < vmw_res_max; ++i)
......
......@@ -66,6 +66,8 @@
#define VMWGFX_CMD_BOUNCE_INIT_SIZE 32768
#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 1
#define VMWGFX_PCI_ID_SVGA2 0x0405
/*
* Perhaps we should have sysfs entries for these.
*/
......@@ -495,13 +497,12 @@ struct vmw_private {
struct vmw_fifo_state fifo;
struct drm_vma_offset_manager vma_manager;
unsigned long vmw_chipset;
u32 vmw_chipset;
resource_size_t io_start;
resource_size_t vram_start;
resource_size_t vram_size;
resource_size_t prim_bb_mem;
u32 *fifo_mem;
resource_size_t fifo_mem_start;
resource_size_t fifo_mem_size;
uint32_t fb_max_width;
uint32_t fb_max_height;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment