Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-03-05

This series contains fixes to e1000e only.

Benjamin Poirier provides all but one fix in this series, starting with
workaround for a VMWare e1000e emulation issue where ICR reads 0x0 on
the emulated device.  Partially reverted a previous commit dealing with
the "Other" interrupt throttling to avoid unforeseen fallout from these
changes that are not strictly necessary.  Restored the ICS write for
receive and transmit queue interrupts in the case that txq or rxq bits
were set in ICR and the Other interrupt handler read and cleared ICR
before the queue interrupt was raised.  Fixed an bug where interrupts
may be missed if ICR is read while INT_ASSERTED is not set, so avoid the
problem by setting all bits related to events that can trigger the Other
interrupt in IMS.  Fixed the return value for check_for_link() when
auto-negotiation is off.

Pierre-Yves Kerbrat fixes e1000e to use dma_zalloc_coherent() to make
sure the ring is memset to 0 to prevent the area from containing
garbage.

v2: added an additional e1000e fix to the series
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e1000e/defines.h

@@ -400,6 +400,10 @@
 #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
 #define E1000_ICR_RXO           0x00000040 /* Receiver Overrun */
 #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_MDAC          0x00000200 /* MDIO Access Complete */
+#define E1000_ICR_SRPD          0x00010000 /* Small Receive Packet Detected */
+#define E1000_ICR_ACK           0x00020000 /* Receive ACK Frame Detected */
+#define E1000_ICR_MNG           0x00040000 /* Manageability Event Detected */
 #define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
 /* If this bit asserted, the driver should claim the interrupt */
 #define E1000_ICR_INT_ASSERTED	0x80000000
@@ -407,7 +411,7 @@
 #define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */
 #define E1000_ICR_TXQ0          0x00400000 /* Tx Queue 0 Interrupt */
 #define E1000_ICR_TXQ1          0x00800000 /* Tx Queue 1 Interrupt */
-#define E1000_ICR_OTHER         0x01000000 /* Other Interrupts */
+#define E1000_ICR_OTHER         0x01000000 /* Other Interrupt */
 
 /* PBA ECC Register */
 #define E1000_PBA_ECC_COUNTER_MASK  0xFFF00000 /* ECC counter mask */
@@ -431,12 +435,27 @@
 	E1000_IMS_RXSEQ  |    \
 	E1000_IMS_LSC)
 
+/* These are all of the events related to the OTHER interrupt.
+ */
+#define IMS_OTHER_MASK ( \
+	E1000_IMS_LSC  | \
+	E1000_IMS_RXO  | \
+	E1000_IMS_MDAC | \
+	E1000_IMS_SRPD | \
+	E1000_IMS_ACK  | \
+	E1000_IMS_MNG)
+
 /* Interrupt Mask Set */
 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
 #define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
 #define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
+#define E1000_IMS_RXO       E1000_ICR_RXO       /* Receiver Overrun */
 #define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */
+#define E1000_IMS_MDAC      E1000_ICR_MDAC      /* MDIO Access Complete */
+#define E1000_IMS_SRPD      E1000_ICR_SRPD      /* Small Receive Packet */
+#define E1000_IMS_ACK       E1000_ICR_ACK       /* Receive ACK Frame Detected */
+#define E1000_IMS_MNG       E1000_ICR_MNG       /* Manageability Event */
 #define E1000_IMS_ECCER     E1000_ICR_ECCER     /* Uncorrectable ECC Error */
 #define E1000_IMS_RXQ0      E1000_ICR_RXQ0      /* Rx Queue 0 Interrupt */
 #define E1000_IMS_RXQ1      E1000_ICR_RXQ1      /* Rx Queue 1 Interrupt */

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -1602,7 +1602,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 * we have already determined whether we have link or not.
 	 */
 	if (!mac->autoneg)
-		return -E1000_ERR_CONFIG;
+		return 1;
 
 	/* Auto-Neg is enabled.  Auto Speed Detection takes care
 	 * of MAC speed/duplex configuration.  So we only need to

drivers/net/ethernet/intel/e1000e/mac.c

@@ -450,7 +450,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 * we have already determined whether we have link or not.
 	 */
 	if (!mac->autoneg)
-		return -E1000_ERR_CONFIG;
+		return 1;
 
 	/* Auto-Neg is enabled.  Auto Speed Detection takes care
 	 * of MAC speed/duplex configuration.  So we only need to

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -1914,30 +1914,20 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 icr;
-	bool enable = true;
-
-	icr = er32(ICR);
-	if (icr & E1000_ICR_RXO) {
-		ew32(ICR, E1000_ICR_RXO);
-		enable = false;
-		/* napi poll will re-enable Other, make sure it runs */
-		if (napi_schedule_prep(&adapter->napi)) {
-			adapter->total_rx_bytes = 0;
-			adapter->total_rx_packets = 0;
-			__napi_schedule(&adapter->napi);
-		}
-	}
+	u32 icr = er32(ICR);
+
+	if (icr & adapter->eiac_mask)
+		ew32(ICS, (icr & adapter->eiac_mask));
+
 	if (icr & E1000_ICR_LSC) {
-		ew32(ICR, E1000_ICR_LSC);
 		hw->mac.get_link_status = true;
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->state))
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (enable && !test_bit(__E1000_DOWN, &adapter->state))
-		ew32(IMS, E1000_IMS_OTHER);
+	if (!test_bit(__E1000_DOWN, &adapter->state))
+		ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
 
 	return IRQ_HANDLED;
 }
@@ -2040,7 +2030,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
 		       hw->hw_addr + E1000_EITR_82574(vector));
 	else
 		writel(1, hw->hw_addr + E1000_EITR_82574(vector));
-	adapter->eiac_mask |= E1000_IMS_OTHER;
 
 	/* Cause Tx interrupts on every write back */
 	ivar |= BIT(31);
@@ -2265,7 +2254,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
 
 	if (adapter->msix_entries) {
 		ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-		ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
+		ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
+		     IMS_OTHER_MASK);
 	} else if (hw->mac.type >= e1000_pch_lpt) {
 		ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
 	} else {
@@ -2333,8 +2323,8 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 
-	ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
-					GFP_KERNEL);
+	ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma,
+					 GFP_KERNEL);
 	if (!ring->desc)
 		return -ENOMEM;
 
@@ -2707,8 +2697,7 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
 		napi_complete_done(napi, work_done);
 		if (!test_bit(__E1000_DOWN, &adapter->state)) {
 			if (adapter->msix_entries)
-				ew32(IMS, adapter->rx_ring->ims_val |
-				     E1000_IMS_OTHER);
+				ew32(IMS, adapter->rx_ring->ims_val);
 			else
 				e1000_irq_enable(adapter);
 		}