net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10

We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and
above which use different DMA_CH(n)_Interrupt_Enable bit definitions for
NIE and AIE.

Fixes: 48863ce5 ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c

@@ -124,6 +124,23 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr,
 	       ioaddr + DMA_CHAN_INTR_ENA(chan));
 }
 
+static void dwmac410_dma_init_channel(void __iomem *ioaddr,
+				      struct stmmac_dma_cfg *dma_cfg, u32 chan)
+{
+	u32 value;
+
+	/* common channel control register config */
+	value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
+	if (dma_cfg->pblx8)
+		value = value | DMA_BUS_MODE_PBL;
+
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_CHAN_INTR_DEFAULT_MASK_4_10,
+	       ioaddr + DMA_CHAN_INTR_ENA(chan));
+}
+
 static void dwmac4_dma_init(void __iomem *ioaddr,
 			    struct stmmac_dma_cfg *dma_cfg, int atds)
 {
@@ -523,7 +540,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = {
 const struct stmmac_dma_ops dwmac410_dma_ops = {
 	.reset = dwmac4_dma_reset,
 	.init = dwmac4_dma_init,
-	.init_chan = dwmac4_dma_init_channel,
+	.init_chan = dwmac410_dma_init_channel,
 	.init_rx_chan = dwmac4_dma_init_rx_chan,
 	.init_tx_chan = dwmac4_dma_init_tx_chan,
 	.axi = dwmac4_dma_axi,