ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps

This enables passive cooling by down-regulating CPU voltage
and frequency.

For the trip points, I used values from the BSP code directly.

The critical trip point value is 30°C above the maximum recommended
ambient temperature (70°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -72,7 +72,7 @@ cpu0: cpu@0 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -83,7 +83,7 @@ cpu@1 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -94,7 +94,7 @@ cpu@2 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -116,7 +116,7 @@ cpu100: cpu@100 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@101 {
+		cpu101: cpu@101 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -127,7 +127,7 @@ cpu@101 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@102 {
+		cpu102: cpu@102 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -138,7 +138,7 @@ cpu@102 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@103 {
+		cpu103: cpu@103 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -1188,12 +1188,60 @@ cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {