Merge commit 'gcl/next' into next

Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt

+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};

Documentation/powerpc/dts-bindings/fsl/spi.txt

@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -62,17 +62,12 @@ nfc@40000000 {
 		interrupt-parent = < &ipic >;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		bank-width = <1>;
 		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package .
+		// stacked package.
 		chips = <2>;
-		nand0@0 {
-			label = "nand0";
-			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
-		};
-		nand1@20000000 {
-			label = "nand1";
-			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
 		};
 	};
 
@@ -166,6 +161,11 @@ rtc@a00 {	// Real time clock
 			interrupt-parent = < &ipic >;
 		};
 
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
 		clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@ gpio@1100 {
 			interrupt-parent = < &ipic >;
 		};
 
-		mscan@1300 {
+		can@1300 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <0>;
 			interrupts = <12 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1300 0x80>;
 		};
 
-		mscan@1380 {
+		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <1>;
 			interrupts = <13 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@ i2c@1700 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <0>;
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <1>;
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@ i2c@1740 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <2>;
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@ axe@2000 {
 		};
 
 		display@2100 {
-			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
 			interrupt-parent = < &ipic >;
@@ -277,7 +288,7 @@ ethernet@2800 {
 
 		// USB1 using external ULPI PHY
 		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	compatible = "fsl,mpc5121-usb2-dr";
 		//	reg = <0x3000 0x1000>;
 		//	#address-cells = <1>;
 		//	#size-cells = <0>;
@@ -285,12 +296,11 @@ ethernet@2800 {
 		//	interrupts = <43 0x8>;
 		//	dr_mode = "otg";
 		//	phy_type = "ulpi";
-		//	port1;
 		//};
 
 		// USB0 using internal UTMI PHY
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x4000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -298,7 +308,8 @@ usb@4000 {
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
-			port0;
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
 		};
 
 		// IO control
@@ -365,7 +376,7 @@ pscfifo@11f00 {
 		};
 
 		dma@14000 {
-			compatible = "fsl,mpc5121-dma2";
+			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
 			interrupt-parent = < &ipic >;

arch/powerpc/include/asm/mpc5121.h

+/*
+ * MPC5121 Prototypes and definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.
+ */
+
+#ifndef __ASM_POWERPC_MPC5121_H__
+#define __ASM_POWERPC_MPC5121_H__
+
+/* MPC512x Reset module registers */
+struct mpc512x_reset_module {
+	u32	rcwlr;	/* Reset Configuration Word Low Register */
+	u32	rcwhr;	/* Reset Configuration Word High Register */
+	u32	reserved1;
+	u32	reserved2;
+	u32	rsr;	/* Reset Status Register */
+	u32	rmr;	/* Reset Mode Register */
+	u32	rpr;	/* Reset Protection Register */
+	u32	rcr;	/* Reset Control Register */
+	u32	rcer;	/* Reset Control Enable Register */
+};
+
+#endif /* __ASM_POWERPC_MPC5121_H__ */

arch/powerpc/include/asm/mpc52xx_psc.h

@@ -25,7 +25,11 @@
 #include <asm/types.h>
 
 /* Max number of PSCs */
+#ifdef CONFIG_PPC_MPC512x
+#define MPC52xx_PSC_MAXNUM     12
+#else
 #define MPC52xx_PSC_MAXNUM	6
+#endif
 
 /* Programmable Serial Controller (PSC) status register bits */
 #define MPC52xx_PSC_SR_UNEX_RX	0x0001

arch/powerpc/platforms/512x/clock.c

@@ -698,8 +698,7 @@ static struct clk_interface mpc5121_clk_functions = {
 	.clk_get_parent		= NULL,
 };
 
-static int
-mpc5121_clk_init(void)
+int __init mpc5121_clk_init(void)
 {
 	struct device_node *np;
 
@@ -724,6 +723,3 @@ mpc5121_clk_init(void)
 	clk_functions = mpc5121_clk_functions;
 	return 0;
 }
-
-
-arch_initcall(mpc5121_clk_init);

arch/powerpc/platforms/512x/mpc5121_ads.c

@@ -64,8 +64,9 @@ define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
 	.setup_arch		= mpc5121_ads_setup_arch,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };

arch/powerpc/platforms/512x/mpc5121_generic.c

@@ -51,8 +51,9 @@ static int __init mpc5121_generic_probe(void)
 define_machine(mpc5121_generic) {
 	.name			= "MPC5121 generic",
 	.probe			= mpc5121_generic_probe,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc512x_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };

arch/powerpc/platforms/512x/mpc512x.h

@@ -12,5 +12,8 @@
 #ifndef __MPC512X_H__
 #define __MPC512X_H__
 extern void __init mpc512x_init_IRQ(void);
+extern void __init mpc512x_init(void);
+extern int __init mpc5121_clk_init(void);
 void __init mpc512x_declare_of_platform_devices(void);
+extern void mpc512x_restart(char *cmd);
 #endif				/* __MPC512X_H__ */

arch/powerpc/platforms/512x/mpc512x_shared.c

@@ -21,9 +21,38 @@
 #include <asm/ipic.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/mpc5121.h>
 
 #include "mpc512x.h"
 
+static struct mpc512x_reset_module __iomem *reset_module_base;
+
+static void __init mpc512x_restart_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+	if (!np)
+		return;
+
+	reset_module_base = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void mpc512x_restart(char *cmd)
+{
+	if (reset_module_base) {
+		/* Enable software reset "RSTE" */
+		out_be32(&reset_module_base->rpr, 0x52535445);
+		/* Set software hard reset */
+		out_be32(&reset_module_base->rcr, 0x2);
+	} else {
+		pr_err("Restart module not mapped.\n");
+	}
+	for (;;)
+		;
+}
+
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
@@ -53,8 +82,22 @@ static struct of_device_id __initdata of_bus_ids[] = {
 
 void __init mpc512x_declare_of_platform_devices(void)
 {
+	struct device_node *np;
+
 	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
 		printk(KERN_ERR __FILE__ ": "
 			"Error while probing of_platform bus\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc");
+	if (np) {
+		of_platform_device_create(np, NULL, NULL);
+		of_node_put(np);
+	}
 }
 
+void __init mpc512x_init(void)
+{
+	mpc512x_declare_of_platform_devices();
+	mpc5121_clk_init();
+	mpc512x_restart_init();
+}

drivers/rtc/Kconfig

@@ -868,4 +868,14 @@ config RTC_DRV_MC13783
 	help
 	  This enables support for the Freescale MC13783 PMIC RTC
 
+config RTC_DRV_MPC5121
+	tristate "Freescale MPC5121 built-in RTC"
+	depends on PPC_MPC512x && RTC_CLASS
+	help
+	  If you say yes here you will get support for the
+	  built-in RTC MPC5121.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-mpc5121.
+
 endif # RTC_CLASS

drivers/rtc/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MC13783)	+= rtc-mc13783.o
 obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
+obj-$(CONFIG_RTC_DRV_MPC5121)	+= rtc-mpc5121.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
 obj-$(CONFIG_RTC_DRV_NUC900)	+= rtc-nuc900.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o

drivers/rtc/rtc-mpc5121.c

+/*
+ * Real-time clock driver for MPC5121
+ *
+ * Copyright 2007, Domen Puncer <domen.puncer@telargo.com>
+ * Copyright 2008, Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+struct mpc5121_rtc_regs {
+	u8 set_time;		/* RTC + 0x00 */
+	u8 hour_set;		/* RTC + 0x01 */
+	u8 minute_set;		/* RTC + 0x02 */
+	u8 second_set;		/* RTC + 0x03 */
+
+	u8 set_date;		/* RTC + 0x04 */
+	u8 month_set;		/* RTC + 0x05 */
+	u8 weekday_set;		/* RTC + 0x06 */
+	u8 date_set;		/* RTC + 0x07 */
+
+	u8 write_sw;		/* RTC + 0x08 */
+	u8 sw_set;		/* RTC + 0x09 */
+	u16 year_set;		/* RTC + 0x0a */
+
+	u8 alm_enable;		/* RTC + 0x0c */
+	u8 alm_hour_set;	/* RTC + 0x0d */
+	u8 alm_min_set;		/* RTC + 0x0e */
+	u8 int_enable;		/* RTC + 0x0f */
+
+	u8 reserved1;
+	u8 hour;		/* RTC + 0x11 */
+	u8 minute;		/* RTC + 0x12 */
+	u8 second;		/* RTC + 0x13 */
+
+	u8 month;		/* RTC + 0x14 */
+	u8 wday_mday;		/* RTC + 0x15 */
+	u16 year;		/* RTC + 0x16 */
+
+	u8 int_alm;		/* RTC + 0x18 */
+	u8 int_sw;		/* RTC + 0x19 */
+	u8 alm_status;		/* RTC + 0x1a */
+	u8 sw_minute;		/* RTC + 0x1b */
+
+	u8 bus_error_1;		/* RTC + 0x1c */
+	u8 int_day;		/* RTC + 0x1d */
+	u8 int_min;		/* RTC + 0x1e */
+	u8 int_sec;		/* RTC + 0x1f */
+
+	/*
+	 * target_time:
+	 *	intended to be used for hibernation but hibernation
+	 *	does not work on silicon rev 1.5 so use it for non-volatile
+	 *	storage of offset between the actual_time register and linux
+	 *	time
+	 */
+	u32 target_time;	/* RTC + 0x20 */
+	/*
+	 * actual_time:
+	 * 	readonly time since VBAT_RTC was last connected
+	 */
+	u32 actual_time;	/* RTC + 0x24 */
+	u32 keep_alive;		/* RTC + 0x28 */
+};
+
+struct mpc5121_rtc_data {
+	unsigned irq;
+	unsigned irq_periodic;
+	struct mpc5121_rtc_regs __iomem *regs;
+	struct rtc_device *rtc;
+	struct rtc_wkalrm wkalarm;
+};
+
+/*
+ * Update second/minute/hour registers.
+ *
+ * This is just so alarm will work.
+ */
+static void mpc5121_rtc_update_smh(struct mpc5121_rtc_regs __iomem *regs,
+				   struct rtc_time *tm)
+{
+	out_8(&regs->second_set, tm->tm_sec);
+	out_8(&regs->minute_set, tm->tm_min);
+	out_8(&regs->hour_set, tm->tm_hour);
+
+	/* set time sequence */
+	out_8(&regs->set_time, 0x1);
+	out_8(&regs->set_time, 0x3);
+	out_8(&regs->set_time, 0x1);
+	out_8(&regs->set_time, 0x0);
+}
+
+static int mpc5121_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	unsigned long now;
+
+	/*
+	 * linux time is actual_time plus the offset saved in target_time
+	 */
+	now = in_be32(&regs->actual_time) + in_be32(&regs->target_time);
+
+	rtc_time_to_tm(now, tm);
+
+	/*
+	 * update second minute hour registers
+	 * so alarms will work
+	 */
+	mpc5121_rtc_update_smh(regs, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int ret;
+	unsigned long now;
+
+	/*
+	 * The actual_time register is read only so we write the offset
+	 * between it and linux time to the target_time register.
+	 */
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0)
+		out_be32(&regs->target_time, now - in_be32(&regs->actual_time));
+
+	/*
+	 * update second minute hour registers
+	 * so alarms will work
+	 */
+	mpc5121_rtc_update_smh(regs, tm);
+
+	return 0;
+}
+
+static int mpc5121_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	*alarm = rtc->wkalarm;
+
+	alarm->pending = in_8(&regs->alm_status);
+
+	return 0;
+}
+
+static int mpc5121_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	/*
+	 * the alarm has no seconds so deal with it
+	 */
+	if (alarm->time.tm_sec) {
+		alarm->time.tm_sec = 0;
+		alarm->time.tm_min++;
+		if (alarm->time.tm_min >= 60) {
+			alarm->time.tm_min = 0;
+			alarm->time.tm_hour++;
+			if (alarm->time.tm_hour >= 24)
+				alarm->time.tm_hour = 0;
+		}
+	}
+
+	alarm->time.tm_mday = -1;
+	alarm->time.tm_mon = -1;
+	alarm->time.tm_year = -1;
+
+	out_8(&regs->alm_min_set, alarm->time.tm_min);
+	out_8(&regs->alm_hour_set, alarm->time.tm_hour);
+
+	out_8(&regs->alm_enable, alarm->enabled);
+
+	rtc->wkalarm = *alarm;
+	return 0;
+}
+
+static irqreturn_t mpc5121_rtc_handler(int irq, void *dev)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata((struct device *)dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	if (in_8(&regs->int_alm)) {
+		/* acknowledge and clear status */
+		out_8(&regs->int_alm, 1);
+		out_8(&regs->alm_status, 1);
+
+		rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t mpc5121_rtc_handler_upd(int irq, void *dev)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata((struct device *)dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	if (in_8(&regs->int_sec) && (in_8(&regs->int_enable) & 0x1)) {
+		/* acknowledge */
+		out_8(&regs->int_sec, 1);
+
+		rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_UF);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int mpc5121_rtc_alarm_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int val;
+
+	if (enabled)
+		val = 1;
+	else
+		val = 0;
+
+	out_8(&regs->alm_enable, val);
+	rtc->wkalarm.enabled = val;
+
+	return 0;
+}
+
+static int mpc5121_rtc_update_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int val;
+
+	val = in_8(&regs->int_enable);
+
+	if (enabled)
+		val = (val & ~0x8) | 0x1;
+	else
+		val &= ~0x1;
+
+	out_8(&regs->int_enable, val);
+
+	return 0;
+}
+
+static const struct rtc_class_ops mpc5121_rtc_ops = {
+	.read_time = mpc5121_rtc_read_time,
+	.set_time = mpc5121_rtc_set_time,
+	.read_alarm = mpc5121_rtc_read_alarm,
+	.set_alarm = mpc5121_rtc_set_alarm,
+	.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
+	.update_irq_enable = mpc5121_rtc_update_irq_enable,
+};
+
+static int __devinit mpc5121_rtc_probe(struct of_device *op,
+					const struct of_device_id *match)
+{
+	struct mpc5121_rtc_data *rtc;
+	int err = 0;
+	u32 ka;
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->regs = of_iomap(op->node, 0);
+	if (!rtc->regs) {
+		dev_err(&op->dev, "%s: couldn't map io space\n", __func__);
+		err = -ENOSYS;
+		goto out_free;
+	}
+
+	device_init_wakeup(&op->dev, 1);
+
+	dev_set_drvdata(&op->dev, rtc);
+
+	rtc->irq = irq_of_parse_and_map(op->node, 1);
+	err = request_irq(rtc->irq, mpc5121_rtc_handler, IRQF_DISABLED,
+						"mpc5121-rtc", &op->dev);
+	if (err) {
+		dev_err(&op->dev, "%s: could not request irq: %i\n",
+							__func__, rtc->irq);
+		goto out_dispose;
+	}
+
+	rtc->irq_periodic = irq_of_parse_and_map(op->node, 0);
+	err = request_irq(rtc->irq_periodic, mpc5121_rtc_handler_upd,
+				IRQF_DISABLED, "mpc5121-rtc_upd", &op->dev);
+	if (err) {
+		dev_err(&op->dev, "%s: could not request irq: %i\n",
+						__func__, rtc->irq_periodic);
+		goto out_dispose2;
+	}
+
+	ka = in_be32(&rtc->regs->keep_alive);
+	if (ka & 0x02) {
+		dev_warn(&op->dev,
+			"mpc5121-rtc: Battery or oscillator failure!\n");
+		out_be32(&rtc->regs->keep_alive, ka);
+	}
+
+	rtc->rtc = rtc_device_register("mpc5121-rtc", &op->dev,
+					&mpc5121_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		err = PTR_ERR(rtc->rtc);
+		goto out_free_irq;
+	}
+
+	return 0;
+
+out_free_irq:
+	free_irq(rtc->irq_periodic, &op->dev);
+out_dispose2:
+	irq_dispose_mapping(rtc->irq_periodic);
+	free_irq(rtc->irq, &op->dev);
+out_dispose:
+	irq_dispose_mapping(rtc->irq);
+	iounmap(rtc->regs);
+out_free:
+	kfree(rtc);
+
+	return err;
+}
+
+static int __devexit mpc5121_rtc_remove(struct of_device *op)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(&op->dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	/* disable interrupt, so there are no nasty surprises */
+	out_8(&regs->alm_enable, 0);
+	out_8(&regs->int_enable, in_8(&regs->int_enable) & ~0x1);
+
+	rtc_device_unregister(rtc->rtc);
+	iounmap(rtc->regs);
+	free_irq(rtc->irq, &op->dev);
+	free_irq(rtc->irq_periodic, &op->dev);
+	irq_dispose_mapping(rtc->irq);
+	irq_dispose_mapping(rtc->irq_periodic);
+	dev_set_drvdata(&op->dev, NULL);
+	kfree(rtc);
+
+	return 0;
+}
+
+static struct of_device_id mpc5121_rtc_match[] __devinitdata = {
+	{ .compatible = "fsl,mpc5121-rtc", },
+	{},
+};
+
+static struct of_platform_driver mpc5121_rtc_driver = {
+	.owner = THIS_MODULE,
+	.name = "mpc5121-rtc",
+	.match_table = mpc5121_rtc_match,
+	.probe = mpc5121_rtc_probe,
+	.remove = __devexit_p(mpc5121_rtc_remove),
+};
+
+static int __init mpc5121_rtc_init(void)
+{
+	return of_register_platform_driver(&mpc5121_rtc_driver);
+}
+module_init(mpc5121_rtc_init);
+
+static void __exit mpc5121_rtc_exit(void)
+{
+	of_unregister_platform_driver(&mpc5121_rtc_driver);
+}
+module_exit(mpc5121_rtc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Rigby <jcrigby@gmail.com>");

drivers/video/fsl-diu-fb.c

@@ -1633,6 +1633,11 @@ static int __init fsl_diu_setup(char *options)
 #endif
 
 static struct of_device_id fsl_diu_match[] = {
+#ifdef CONFIG_PPC_MPC512x
+	{
+		.compatible = "fsl,mpc5121-diu",
+	},
+#endif
 	{
 		.compatible = "fsl,diu",
 	},