Skip to content

L
linux
Commit 88264f1f authored by Bjorn Andersson's avatar Bjorn Andersson
Browse files
Options

arm64: dts: qcom: db820c: Remove pin specific files 

Rather than scattering pinctrl definitions in various files, merge the
nodes into db820c.dtsi to make it easier to navigate.
Acked-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent d5f4ac86
Hide whitespace changes
Inline Side-by-side
Showing with 190 additions and 203 deletions
arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi deleted 100644 → 0
View file @ d5f4ac86
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
&msmgpio {
sdc2_cd_on: sdc2_cd_on {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_cd_off: sdc2_cd_off {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
blsp1_uart1_default: blsp1_uart1_default {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
};
config {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart1_sleep: blsp1_uart1_sleep {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
};
config {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
drive-strength = <2>;
bias-disable;
};
};
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <16>;
};
};
hdmi_hpd_suspend: hdmi_hpd_suspend {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <2>;
};
};
hdmi_ddc_active: hdmi_ddc_active {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
hdmi_ddc_suspend: hdmi_ddc_suspend {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-down;
};
};
};
arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi deleted 100644 → 0
View file @ d5f4ac86
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
&pm8994_gpios {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
pinconf {
pins = "gpio5";
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
bt_en_gpios: bt_en_gpios {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
wlan_en_gpios: wlan_en_gpios {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
audio_mclk: clk_div1 {
pinconf {
pins = "gpio15";
function = "func1";
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
function = "normal";
input-enable;
drive-push-pull;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
divclk4_pin_a: divclk4 {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pmi8994_gpios {
usb2_vbus_det_gpio: pmi8996_gpio6 {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
View file @ 88264f1f
......@@ -6,10 +6,9 @@
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
......@@ -384,6 +383,110 @@ &msmgpio {
"NC", /* GPIO_147 */
"NC", /* GPIO_148 */
"NC"; /* GPIO_149 */
sdc2_cd_on: sdc2_cd_on {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
};
sdc2_cd_off: sdc2_cd_off {
mux {
pins = "gpio38";
function = "gpio";
};
config {
pins = "gpio38";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
blsp1_uart1_default: blsp1_uart1_default {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
};
config {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart1_sleep: blsp1_uart1_sleep {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
};
config {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
drive-strength = <2>;
bias-disable;
};
};
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <16>;
};
};
hdmi_hpd_suspend: hdmi_hpd_suspend {
mux {
pins = "gpio34";
function = "hdmi_hot";
};
config {
pins = "gpio34";
bias-pull-down;
drive-strength = <2>;
};
};
hdmi_ddc_active: hdmi_ddc_active {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-up;
};
};
hdmi_ddc_suspend: hdmi_ddc_suspend {
mux {
pins = "gpio32", "gpio33";
function = "hdmi_ddc";
};
config {
pins = "gpio32", "gpio33";
drive-strength = <2>;
bias-pull-down;
};
};
};
&pcie0 {
......@@ -436,6 +539,80 @@ &pm8994_gpios {
"PMIC_SLB",
"PMIC_BUA",
"USB_VBUS_DET";
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
ls_exp_gpio_f: pm8994_gpio5 {
pinconf {
pins = "gpio5";
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
bt_en_gpios: bt_en_gpios {
pinconf {
pins = "gpio19";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
wlan_en_gpios: wlan_en_gpios {
pinconf {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
power-source = <PM8994_GPIO_S4>; // 1.8V
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
bias-pull-down;
};
};
audio_mclk: clk_div1 {
pinconf {
pins = "gpio15";
function = "func1";
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
function = "normal";
input-enable;
drive-push-pull;
bias-pull-up;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
divclk4_pin_a: divclk4 {
pinconf {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&pm8994_mpps {
......@@ -462,6 +639,17 @@ &pmi8994_gpios {
"NC",
"NC",
"NC";
usb2_vbus_det_gpio: pmi8996_gpio6 {
pinconf {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
input-enable;
bias-pull-down;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
};
&rpm_requests {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7