Commit 88751dd6 authored by Michael Hennerich's avatar Michael Hennerich Committed by Dmitry Torokhov

Input: add driver for ADP5588 QWERTY I2C Keypad

Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarBryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 38e783b3
......@@ -24,6 +24,16 @@ config KEYBOARD_AAED2000
To compile this driver as a module, choose M here: the
module will be called aaed2000_kbd.
config KEYBOARD_ADP5588
tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
depends on I2C
help
Say Y here if you want to use a ADP5588 attached to your
system I2C bus.
To compile this driver as a module, choose M here: the
module will be called adp5588-keys.
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
depends on AMIGA
......
......@@ -5,6 +5,7 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
......
/*
* File: drivers/input/keyboard/adp5588_keys.c
* Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2008-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/workqueue.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/i2c/adp5588.h>
/* Configuration Register1 */
#define AUTO_INC (1 << 7)
#define GPIEM_CFG (1 << 6)
#define OVR_FLOW_M (1 << 5)
#define INT_CFG (1 << 4)
#define OVR_FLOW_IEN (1 << 3)
#define K_LCK_IM (1 << 2)
#define GPI_IEN (1 << 1)
#define KE_IEN (1 << 0)
/* Interrupt Status Register */
#define CMP2_INT (1 << 5)
#define CMP1_INT (1 << 4)
#define OVR_FLOW_INT (1 << 3)
#define K_LCK_INT (1 << 2)
#define GPI_INT (1 << 1)
#define KE_INT (1 << 0)
/* Key Lock and Event Counter Register */
#define K_LCK_EN (1 << 6)
#define LCK21 0x30
#define KEC 0xF
/* Key Event Register xy */
#define KEY_EV_PRESSED (1 << 7)
#define KEY_EV_MASK (0x7F)
#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */
#define KEYP_MAX_EVENT 10
/*
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
* since the Event Counter Register updated 25ms after the interrupt
* asserted.
*/
#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
struct adp5588_kpad {
struct i2c_client *client;
struct input_dev *input;
struct delayed_work work;
unsigned long delay;
unsigned short keycode[ADP5588_KEYMAPSIZE];
};
static int adp5588_read(struct i2c_client *client, u8 reg)
{
int ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0)
dev_err(&client->dev, "Read Error\n");
return ret;
}
static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
{
return i2c_smbus_write_byte_data(client, reg, val);
}
static void adp5588_work(struct work_struct *work)
{
struct adp5588_kpad *kpad = container_of(work,
struct adp5588_kpad, work.work);
struct i2c_client *client = kpad->client;
int i, key, status, ev_cnt;
status = adp5588_read(client, INT_STAT);
if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
dev_err(&client->dev, "Event Overflow Error\n");
if (status & KE_INT) {
ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
if (ev_cnt) {
for (i = 0; i < ev_cnt; i++) {
key = adp5588_read(client, Key_EVENTA + i);
input_report_key(kpad->input,
kpad->keycode[(key & KEY_EV_MASK) - 1],
key & KEY_EV_PRESSED);
}
input_sync(kpad->input);
}
}
adp5588_write(client, INT_STAT, status); /* Status is W1C */
}
static irqreturn_t adp5588_irq(int irq, void *handle)
{
struct adp5588_kpad *kpad = handle;
/*
* use keventd context to read the event fifo registers
* Schedule readout at least 25ms after notification for
* REVID < 4
*/
schedule_delayed_work(&kpad->work, kpad->delay);
return IRQ_HANDLED;
}
static int __devinit adp5588_setup(struct i2c_client *client)
{
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
int i, ret;
ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
if (pdata->en_keylock) {
ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
}
for (i = 0; i < KEYP_MAX_EVENT; i++)
ret |= adp5588_read(client, Key_EVENTA);
ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
OVR_FLOW_INT | K_LCK_INT |
GPI_INT | KE_INT); /* Status is W1C */
ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
if (ret < 0) {
dev_err(&client->dev, "Write Error\n");
return ret;
}
return 0;
}
static int __devinit adp5588_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5588_kpad *kpad;
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
struct input_dev *input;
unsigned int revid;
int ret, i;
int error;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
return -EIO;
}
if (!pdata) {
dev_err(&client->dev, "no platform data?\n");
return -EINVAL;
}
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
return -EINVAL;
}
if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
dev_err(&client->dev, "invalid keymapsize\n");
return -EINVAL;
}
if (!client->irq) {
dev_err(&client->dev, "no IRQ?\n");
return -EINVAL;
}
kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
input = input_allocate_device();
if (!kpad || !input) {
error = -ENOMEM;
goto err_free_mem;
}
kpad->client = client;
kpad->input = input;
INIT_DELAYED_WORK(&kpad->work, adp5588_work);
ret = adp5588_read(client, DEV_ID);
if (ret < 0) {
error = ret;
goto err_free_mem;
}
revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
if (WA_DELAYED_READOUT_REVID(revid))
kpad->delay = msecs_to_jiffies(30);
input->name = client->name;
input->phys = "adp5588-keys/input0";
input->dev.parent = &client->dev;
input_set_drvdata(input, kpad);
input->id.bustype = BUS_I2C;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = revid;
input->keycodesize = sizeof(kpad->keycode[0]);
input->keycodemax = pdata->keymapsize;
input->keycode = kpad->keycode;
memcpy(kpad->keycode, pdata->keymap,
pdata->keymapsize * input->keycodesize);
/* setup input device */
__set_bit(EV_KEY, input->evbit);
if (pdata->repeat)
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
error = input_register_device(input);
if (error) {
dev_err(&client->dev, "unable to register input device\n");
goto err_free_mem;
}
error = request_irq(client->irq, adp5588_irq,
IRQF_TRIGGER_FALLING | IRQF_DISABLED,
client->dev.driver->name, kpad);
if (error) {
dev_err(&client->dev, "irq %d busy?\n", client->irq);
goto err_unreg_dev;
}
error = adp5588_setup(client);
if (error)
goto err_free_irq;
device_init_wakeup(&client->dev, 1);
i2c_set_clientdata(client, kpad);
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
return 0;
err_free_irq:
free_irq(client->irq, kpad);
err_unreg_dev:
input_unregister_device(input);
input = NULL;
err_free_mem:
input_free_device(input);
kfree(kpad);
return error;
}
static int __devexit adp5588_remove(struct i2c_client *client)
{
struct adp5588_kpad *kpad = i2c_get_clientdata(client);
adp5588_write(client, CFG, 0);
free_irq(client->irq, kpad);
cancel_delayed_work_sync(&kpad->work);
input_unregister_device(kpad->input);
i2c_set_clientdata(client, NULL);
kfree(kpad);
return 0;
}
#ifdef CONFIG_PM
static int adp5588_suspend(struct device *dev)
{
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
struct i2c_client *client = kpad->client;
disable_irq(client->irq);
cancel_delayed_work_sync(&kpad->work);
if (device_may_wakeup(&client->dev))
enable_irq_wake(client->irq);
return 0;
}
static int adp5588_resume(struct device *dev)
{
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
struct i2c_client *client = kpad->client;
if (device_may_wakeup(&client->dev))
disable_irq_wake(client->irq);
enable_irq(client->irq);
return 0;
}
static struct dev_pm_ops adp5588_dev_pm_ops = {
.suspend = adp5588_suspend,
.resume = adp5588_resume,
};
#endif
static const struct i2c_device_id adp5588_id[] = {
{ KBUILD_MODNAME, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adp5588_id);
static struct i2c_driver adp5588_driver = {
.driver = {
.name = KBUILD_MODNAME,
#ifdef CONFIG_PM
.pm = &adp5588_dev_pm_ops,
#endif
},
.probe = adp5588_probe,
.remove = __devexit_p(adp5588_remove),
.id_table = adp5588_id,
};
static int __init adp5588_init(void)
{
return i2c_add_driver(&adp5588_driver);
}
module_init(adp5588_init);
static void __exit adp5588_exit(void)
{
i2c_del_driver(&adp5588_driver);
}
module_exit(adp5588_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP5588 Keypad driver");
MODULE_ALIAS("platform:adp5588-keys");
/*
* Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
*
* Copyright 2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef _ADP5588_H
#define _ADP5588_H
#define DEV_ID 0x00 /* Device ID */
#define CFG 0x01 /* Configuration Register1 */
#define INT_STAT 0x02 /* Interrupt Status Register */
#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */
#define Key_EVENTA 0x04 /* Key Event Register A */
#define Key_EVENTB 0x05 /* Key Event Register B */
#define Key_EVENTC 0x06 /* Key Event Register C */
#define Key_EVENTD 0x07 /* Key Event Register D */
#define Key_EVENTE 0x08 /* Key Event Register E */
#define Key_EVENTF 0x09 /* Key Event Register F */
#define Key_EVENTG 0x0A /* Key Event Register G */
#define Key_EVENTH 0x0B /* Key Event Register H */
#define Key_EVENTI 0x0C /* Key Event Register I */
#define Key_EVENTJ 0x0D /* Key Event Register J */
#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */
#define UNLOCK1 0x0F /* Unlock Key1 */
#define UNLOCK2 0x10 /* Unlock Key2 */
#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */
#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */
#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */
#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */
#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */
#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */
#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */
#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */
#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */
#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */
#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */
#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */
#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */
#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */
#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */
#define GPI_EM1 0x20 /* GPI Event Mode 1 */
#define GPI_EM2 0x21 /* GPI Event Mode 2 */
#define GPI_EM3 0x22 /* GPI Event Mode 3 */
#define GPIO_DIR1 0x23 /* GPIO Data Direction */
#define GPIO_DIR2 0x24 /* GPIO Data Direction */
#define GPIO_DIR3 0x25 /* GPIO Data Direction */
#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */
#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */
#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */
#define Debounce_DIS1 0x29 /* Debounce Disable */
#define Debounce_DIS2 0x2A /* Debounce Disable */
#define Debounce_DIS3 0x2B /* Debounce Disable */
#define GPIO_PULL1 0x2C /* GPIO Pull Disable */
#define GPIO_PULL2 0x2D /* GPIO Pull Disable */
#define GPIO_PULL3 0x2E /* GPIO Pull Disable */
#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */
#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */
#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */
#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */
#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */
#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */
#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */
#define ADP5588_DEVICE_ID_MASK 0xF
/* Put one of these structures in i2c_board_info platform_data */
#define ADP5588_KEYMAPSIZE 80
struct adp5588_kpad_platform_data {
int rows; /* Number of rows */
int cols; /* Number of columns */
const unsigned short *keymap; /* Pointer to keymap */
unsigned short keymapsize; /* Keymap size */
unsigned repeat:1; /* Enable key repeat */
unsigned en_keylock:1; /* Enable Key Lock feature */
unsigned short unlock_key1; /* Unlock Key 1 */
unsigned short unlock_key2; /* Unlock Key 2 */
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment