ARM: dts: imx: update #interrupt-cells for gpio nodes

Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that
the gpio irq type can be specified in device tree.  Also update binding
document to make it clear.
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt

@@ -11,6 +11,13 @@ Required properties:
   the second cell is used to specify the gpio polarity:
       0 = active high
       1 = active low
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
+  The second cell bits[3:0] is used to specify trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
 
 Example:
 
@@ -20,4 +27,6 @@ gpio0: gpio@73f84000 {
 	interrupts = <50 51>;
 	gpio-controller;
 	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
 };

arch/arm/boot/dts/imx27.dtsi

@@ -121,7 +121,7 @@ gpio1: gpio@10015000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio2: gpio@10015100 {
@@ -131,7 +131,7 @@ gpio2: gpio@10015100 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio3: gpio@10015200 {
@@ -141,7 +141,7 @@ gpio3: gpio@10015200 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio4: gpio@10015300 {
@@ -151,7 +151,7 @@ gpio4: gpio@10015300 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio5: gpio@10015400 {
@@ -161,7 +161,7 @@ gpio5: gpio@10015400 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio6: gpio@10015500 {
@@ -171,7 +171,7 @@ gpio6: gpio@10015500 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			cspi3: cspi@10017000 {

arch/arm/boot/dts/imx51.dtsi

@@ -133,7 +133,7 @@ gpio1: gpio@73f84000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio2: gpio@73f88000 {
@@ -143,7 +143,7 @@ gpio2: gpio@73f88000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio3: gpio@73f8c000 {
@@ -153,7 +153,7 @@ gpio3: gpio@73f8c000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio4: gpio@73f90000 {
@@ -163,7 +163,7 @@ gpio4: gpio@73f90000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			wdog@73f98000 { /* WDOG1 */

arch/arm/boot/dts/imx53.dtsi

@@ -135,7 +135,7 @@ gpio1: gpio@53f84000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio2: gpio@53f88000 {
@@ -145,7 +145,7 @@ gpio2: gpio@53f88000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio3: gpio@53f8c000 {
@@ -155,7 +155,7 @@ gpio3: gpio@53f8c000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio4: gpio@53f90000 {
@@ -165,7 +165,7 @@ gpio4: gpio@53f90000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			wdog@53f98000 { /* WDOG1 */
@@ -203,7 +203,7 @@ gpio5: gpio@53fdc000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio6: gpio@53fe0000 {
@@ -213,7 +213,7 @@ gpio6: gpio@53fe0000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio7: gpio@53fe4000 {
@@ -223,7 +223,7 @@ gpio7: gpio@53fe4000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			i2c@53fec000 { /* I2C3 */

arch/arm/boot/dts/imx6q.dtsi

@@ -283,7 +283,7 @@ gpio1: gpio@0209c000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -293,7 +293,7 @@ gpio2: gpio@020a0000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -303,7 +303,7 @@ gpio3: gpio@020a4000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -313,7 +313,7 @@ gpio4: gpio@020a8000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -323,7 +323,7 @@ gpio5: gpio@020ac000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio6: gpio@020b0000 {
@@ -333,7 +333,7 @@ gpio6: gpio@020b0000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			gpio7: gpio@020b4000 {
@@ -343,7 +343,7 @@ gpio7: gpio@020b4000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 			};
 
 			kpp@020b8000 {