powerpc/44x: Add NAND support to Canyonlands dts

Also some whitespace cleanup in the USB device nodes.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/boot/dts/canyonlands.dts

 /*
  * Device Tree Source for AMCC Canyonlands (460EX)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -149,19 +149,19 @@ MAL0: mcmal {
 					/*RXDE*/  0x5 0x4>;
 		};
 
-                USB0: ehci@bffd0400 {
-                        compatible = "ibm,usb-ehci-460ex", "usb-ehci";
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1d 4>;
-                        reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
-                };
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
 
-                USB1: usb@bffd0000 {
-                        compatible = "ohci-le";
-                        reg = <4 0xbffd0000 0x60>;
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1e 4>;
-                };
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
@@ -215,6 +215,29 @@ partition@3fa0000 {
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {