Merge samba.org:/scratch/anton/linux-2.5

into samba.org:/scratch/anton/tmp3

arch/ppc64/Makefile

@@ -39,6 +39,10 @@ $(boottarget-y): vmlinux
 	rm -f .config arch/ppc64/defconfig
 	cp -f arch/ppc64/configs/$(@:config=defconfig) arch/ppc64/defconfig
 
+install: vmlinux
+	echo doing ppc64 make install
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 

arch/ppc64/boot/Makefile

@@ -122,5 +122,7 @@ $(obj)/imagesize.c: vmlinux
 	awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' \
 		>> $(obj)/imagesize.c
 
+install: $(CONFIGURE) $(BOOTIMAGE)
+	sh -x $(src)/install.sh "$(KERNELRELEASE)" "$(obj)/zImage" "$(TOPDIR)/System.map" "$(INSTALL_PATH)"
 
 clean-files := $(patsubst $(obj)/%,%, $(obj-boot))

arch/ppc64/kernel/eeh.c

@@ -115,8 +115,17 @@ unsigned long eeh_check_failure(void *token, unsigned long val)
 		ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
 				dn->eeh_config_addr, BUID_HI(dn->phb->buid), BUID_LO(dn->phb->buid));
 		if (ret == 0 && rets[1] == 1 && rets[0] >= 2) {
-			panic("EEH:  MMIO failure (%ld) on device:\n  %s %s\n",
-			      rets[0], pci_name(dev), dev->dev.name);
+			/*
+			 * XXX We should create a separate sysctl for this.
+			 *
+			 * Since the panic_on_oops sysctl is used to halt
+			 * the system in light of potential corruption, we
+			 * can use it here.
+			 */
+			if (panic_on_oops)
+				panic("EEH: MMIO failure (%ld) on device:\n%s\n", rets[0], pci_name(dev));
+			else
+				printk("EEH: MMIO failure (%ld) on device:\n%s\n", rets[0], pci_name(dev));
 		}
 	}
 	eeh_false_positives++;

arch/ppc64/kernel/head.S

@@ -40,6 +40,15 @@
 #define DO_SOFT_DISABLE
 #endif
 
+/* copy saved SOFTE bit or EE bit from saved MSR depending
+ * if we are doing soft-disable or not
+ */
+#ifdef DO_SOFT_DISABLE
+#define DO_COPY_EE()	ld	r20,SOFTE(r1)
+#else
+#define DO_COPY_EE()	rldicl	r20,r23,49,63
+#endif
+
 /*
  * hcall interface to pSeries LPAR
  */
@@ -618,11 +627,7 @@ stab_bolted_user_return:
 	ld      r4,_DAR(r1)
 	ld      r5,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)		/* Copy saved SOFTE bit */
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x300
 	bl      .save_remaining_regs
 	bl      .do_page_fault
@@ -644,12 +649,9 @@ DataAccessSLB_common:
 	or.	r3,r3,r3		/* Check return code */
 	beq     fast_exception_return   /* Return if we succeeded */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x380
+	li	r5,0
 	bl      .save_remaining_regs
 	bl      .do_page_fault
 	b       .ret_from_except
@@ -670,13 +672,9 @@ InstructionAccess_common:
 	bl	.do_hash_page_ISI	/* Try to handle as hpte fault */
 1:
 	mr	r4,r22
-	mr	r5,r23
+	rlwinm	r5,r23,0,4,4		/* We only care about PR in error_code */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x400
 	bl      .save_remaining_regs
 	bl      .do_page_fault
@@ -692,12 +690,9 @@ InstructionAccessSLB_common:
 	beq+	fast_exception_return   /* Return if we succeeded */
 
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x480
+	li	r5,0
 	bl      .save_remaining_regs
 	bl      .do_page_fault
 	b       .ret_from_except
@@ -769,11 +764,7 @@ HardwareInterrupt_entry:
 Alignment_common:
 	EXCEPTION_PROLOG_COMMON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x600
 	bl      .save_remaining_regs
 	bl      .AlignmentException
@@ -783,11 +774,7 @@ Alignment_common:
 ProgramCheck_common:
 	EXCEPTION_PROLOG_COMMON
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x700
 	bl      .save_remaining_regs
 	bl      .ProgramCheckException
@@ -798,11 +785,7 @@ FPUnavailable_common:
 	EXCEPTION_PROLOG_COMMON
 	bne	.load_up_fpu		/* if from user, just load it up */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0x800
 	bl      .save_remaining_regs
 	bl      .KernelFPUnavailableException
@@ -818,11 +801,7 @@ SystemCall_common:
 	beq+	HardwareInterrupt_entry
 1:
 #endif
-#ifdef DO_SOFT_DISABLE
-	ld	r20,SOFTE(r1)
-#else
-	rldicl	r20,r23,49,63   	/* copy EE bit from saved MSR */
-#endif
+	DO_COPY_EE()
 	li	r6,0xC00
 	bl      .save_remaining_regs
 	bl      .DoSyscall

arch/ppc64/kernel/pSeries_pci.c

@@ -427,6 +427,7 @@ unsigned long __init find_and_init_phbs(void)
 
 void pcibios_name_device(struct pci_dev *dev)
 {
+#if 0
 	struct device_node *dn;
 
 	/*
@@ -446,6 +447,7 @@ void pcibios_name_device(struct pci_dev *dev)
 			}
 		}
 	}
+#endif
 }   
 
 void __init pcibios_fixup_device_resources(struct pci_dev *dev,

arch/ppc64/kernel/xics.c

@@ -267,6 +267,15 @@ void xics_disable_irq(u_int virq)
 		       irq, call_status);
 		return;
 	}
+
+	/* Have to set XIVE to 0xff to be able to remove a slot */
+	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, default_server,
+				0xff);
+	if (call_status != 0) {
+	printk("xics_disable_irq: irq=%x: ibm_set_xive(0xff) returned %lx\n",
+	       irq, call_status);
+		return;
+	}
 }
 
 void xics_end_irq(u_int	irq)

arch/ppc64/mm/fault.c

@@ -46,8 +46,10 @@ int debugger_kernel_faults = 1;
 void bad_page_fault(struct pt_regs *, unsigned long, int);
 
 /*
- * For 600- and 800-family processors, the error_code parameter is DSISR
- * for a data fault, SRR1 for an instruction fault.
+ * The error_code parameter is
+ *  - DSISR for a non-SLB data access fault,
+ *  - SRR1 & 0x08000000 for a non-SLB instruction access fault
+ *  - 0 any SLB fault.
  */
 void do_page_fault(struct pt_regs *regs, unsigned long address,
 		   unsigned long error_code)
@@ -58,17 +60,6 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	unsigned long code = SEGV_MAPERR;
 	unsigned long is_write = error_code & 0x02000000;
 
-	/*
-	 * Fortunately the bit assignments in SRR1 for an instruction
-	 * fault and DSISR for a data fault are mostly the same for the
-	 * bits we are interested in.  But there are some bits which
-	 * indicate errors in DSISR but can validly be set in SRR1.
-	 */
-	if (regs->trap == 0x400)
-		error_code &= 0x48200000;
-	else if (regs->trap != 0x300) /* ensure error_code is 0 on SLB miss */
-		error_code = 0;
-
 #ifdef CONFIG_DEBUG_KERNEL
 	if (debugger_fault_handler && (regs->trap == 0x300 ||
 				       regs->trap == 0x380)) {

include/asm-ppc64/prom.h

@@ -183,8 +183,6 @@ extern struct device_node *find_type_devices(const char *type);
 extern struct device_node *find_path_device(const char *path);
 extern struct device_node *find_compatible_devices(const char *type,
 						   const char *compat);
-extern struct device_node *find_pci_device_OFnode(unsigned char bus,
-	unsigned char dev_fn);
 extern struct device_node *find_all_nodes(void);
 extern int device_is_compatible(struct device_node *device, const char *);
 extern int machine_is_compatible(const char *compat);