Skip to content

L
linux
Commit 89140f41 authored by Andrea Gelmini's avatar Andrea Gelmini Committed by Jean Delvare
Browse files
Options

Documentation/i2c: Checkpatch cleanup 

Remove all trailing whitespace in Documentation/i2c.
Signed-off-by: default avatarAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent aef4b9aa
Hide whitespace changes
Inline Side-by-side
Showing with 54 additions and 54 deletions
Documentation/i2c/busses/i2c-ali1535
View file @ 89140f41
......@@ -6,12 +6,12 @@ Supported adapters:
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
Frodo Looijaard <frodol@dds.nl>,
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Stephen Rousset<stephen.rousset@rocketlogix.com>
Description
-----------
......
Documentation/i2c/busses/i2c-ali1563
View file @ 89140f41
......@@ -18,7 +18,7 @@ For an overview of these chips see http://www.acerlabs.com
The M1563 southbridge is deceptively similar to the M1533, with a few
notable exceptions. One of those happens to be the fact they upgraded the
i2c core to be SMBus 2.0 compliant, and happens to be almost identical to
the i2c controller found in the Intel 801 south bridges.
the i2c controller found in the Intel 801 south bridges.
Features
--------
......
Documentation/i2c/busses/i2c-ali15x3
View file @ 89140f41
......@@ -6,8 +6,8 @@ Supported adapters:
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
......@@ -40,10 +40,10 @@ M1541 and M1543C South Bridges.
The M1543C is a South bridge for desktop systems.
The M1541 is a South bridge for portable systems.
They are part of the following ALI chipsets:
* "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
* "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
100MHz CPU Front Side bus
* "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
* "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
CPU Front Side bus
Some Aladdin V motherboards:
Asus P5A
......@@ -77,7 +77,7 @@ output of lspci will show something similar to the following:
** then run lspci.
** If you see the 1533 and 5229 devices but NOT the 7101 device,
** then you must enable ACPI, the PMU, SMB, or something similar
** in the BIOS.
** in the BIOS.
** The driver won't work if it can't find the M7101 device.
The SMB controller is part of the M7101 device, which is an ACPI-compliant
......@@ -87,8 +87,8 @@ The whole M7101 device has to be enabled for the SMB to work. You can't
just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
Features
--------
Features
--------
This driver controls the SMB Host only. The SMB Slave
controller on the M15X3 is not enabled. This driver does not use
......
Documentation/i2c/busses/i2c-pca-isa
View file @ 89140f41
Kernel driver i2c-pca-isa
Supported adapters:
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
Module Parameters
-----------------
......@@ -12,12 +12,12 @@ Module Parameters
* base int
I/O base address
* irq int
IRQ interrupt
* clock int
IRQ interrupt
* clock int
Clock rate as described in table 1 of PCA9564 datasheet
Description
-----------
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
Documentation/i2c/busses/i2c-sis5595
View file @ 89140f41
Kernel driver i2c-sis5595
Authors:
Authors:
Frodo Looijaard <frodol@dds.nl>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Philip Edelbrock <phil@netroedge.com>
Philip Edelbrock <phil@netroedge.com>
Supported adapters:
* Silicon Integrated Systems Corp. SiS5595 Southbridge
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
Note: all have mfr. ID 0x1039.
SUPPORTED PCI ID
5595 0008
Note: these chips contain a 0008 device which is incompatible with the
5595. We recognize these by the presence of the listed
"blacklist" PCI ID and refuse to load.
NOT SUPPORTED PCI ID BLACKLIST PCI ID
540 0008 0540
550 0008 0550
5513 0008 5511
5581 0008 5597
5582 0008 5597
5597 0008 5597
5598 0008 5597/5598
630 0008 0630
645 0008 0645
646 0008 0646
648 0008 0648
650 0008 0650
651 0008 0651
730 0008 0730
735 0008 0735
745 0008 0745
746 0008 0746
Note: all have mfr. ID 0x1039.
SUPPORTED PCI ID
5595 0008
Note: these chips contain a 0008 device which is incompatible with the
5595. We recognize these by the presence of the listed
"blacklist" PCI ID and refuse to load.
NOT SUPPORTED PCI ID BLACKLIST PCI ID
540 0008 0540
550 0008 0550
5513 0008 5511
5581 0008 5597
5582 0008 5597
5597 0008 5597
5598 0008 5597/5598
630 0008 0630
645 0008 0645
646 0008 0646
648 0008 0648
650 0008 0650
651 0008 0651
730 0008 0730
735 0008 0735
745 0008 0745
746 0008 0746
Module Parameters
-----------------
......
Documentation/i2c/busses/i2c-sis630
View file @ 89140f41
......@@ -14,9 +14,9 @@ Module Parameters
* force = [1|0] Forcibly enable the SIS630. DANGEROUS!
This can be interesting for chipsets not named
above to check if it works for you chipset, but DANGEROUS!
* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
what your BIOS use). DANGEROUS! This should be a bit
* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
what your BIOS use). DANGEROUS! This should be a bit
faster, but freeze some systems (i.e. my Laptop).
......@@ -44,6 +44,6 @@ Philip Edelbrock <phil@netroedge.com>
- testing SiS730 support
Mark M. Hoffman <mhoffman@lightlink.com>
- bug fixes
To anyone else which I forgot here ;), thanks!
Documentation/i2c/ten-bit-addresses
View file @ 89140f41
The I2C protocol knows about two kinds of device addresses: normal 7 bit
The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
S Addr7 Rd/Wr ....
S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
WARNING! The current 10 bit address support is EXPERIMENTAL. There are
WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7