dmaengine: tegra: add slave capabilities reporting

After commit ecc19d17 ("dmaengine: Add
a warning for drivers not using the generic slave caps retrieval"),
the Tegra APB DMA driver causes this warning during boot:

WARNING: CPU: 0 PID: 1 at drivers/dma/dmaengine.c:830 dma_async_device_register+0x294/0x538()
this driver doesn't support generic slave capabilities reporting

Fix by setting the appropriate reporting structure fields that are
passed to dma_async_device_register().
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/tegra20-apb-dma.c

@@ -1425,6 +1425,21 @@ static int tegra_dma_probe(struct platform_device *pdev)
 					tegra_dma_free_chan_resources;
 	tdma->dma_dev.device_prep_slave_sg = tegra_dma_prep_slave_sg;
 	tdma->dma_dev.device_prep_dma_cyclic = tegra_dma_prep_dma_cyclic;
+	tdma->dma_dev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+		BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+		BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+		BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+	tdma->dma_dev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+		BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+		BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+		BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+	tdma->dma_dev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	/*
+	 * XXX The hardware appears to support
+	 * DMA_RESIDUE_GRANULARITY_BURST-level reporting, but it's
+	 * only used by this driver during tegra_dma_terminate_all()
+	 */
+	tdma->dma_dev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
 	tdma->dma_dev.device_config = tegra_dma_slave_config;
 	tdma->dma_dev.device_terminate_all = tegra_dma_terminate_all;
 	tdma->dma_dev.device_tx_status = tegra_dma_tx_status;