Commit 896c62d4 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Geert Uytterhoeven

arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes

Add usb dmac and hsusb device nodes to the RZ/G2H SoC dtsi.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarMarian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1594919915-5225-14-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent 0faf5f95
......@@ -838,10 +838,48 @@ hscif4: serial@e66b0000 {
};
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a774e1",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
/* placeholder */
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774e1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb_dmac1: dma-controller@e65b0000 {
compatible = "renesas,r8a774e1-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb3_phy0: usb-phy@e65ee000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment